MEDER electronic SIL RF Series High Frequency SIL Reed Relays DESCRIPTION Single-In-Line Reed Relays reduce the required space to a minimum. Requiring only half the PCB area of the DIP or DIL series, the SIL relays offer all the advantages of Reed Technology. APPLICATIONS • • • • • FEATURES • • • • In-circuit-tester High voltage cable tester Tele-communication Alarm systems Measure and control systems UL certified Insulation voltages up to 4.25 kVDC Coax screen for Z=50 Ohm Impedance Switching frequency up to 1.5 GHz DIMENSIONS All dimensions in mm [inch] 5.08max. [0.2] 19.80max. [0.78] 3.50±0.20 [1.38±0.01] 7.80max. [0.31] 0.60x0.25 [0.024x0.01] 15.24 [0.6] PIN OUT View from top of component, 2.54mm [0.10”] pitch grid 1 2 3 5 6 7 1 2 3 5 with Diode www.meder.com 202 6 7 MEDER electronic SIL RF Series High Frequency SIL Reed Relays RELAY DATA All Data at 20° C Switch Model → Contact Form → Contact Ratings Conditions Switching Power Any DC combination of V & A not to exceed their individual max.‘s Switching Voltage Switch 72 Form A Min. Typ. Max. Units 15 W DC or peak AC 200 V Switching Current DC or peak AC 1.0 A Carry Current DC or peak AC 1.25 A Static Contact Resistance w/ 0.5 V & 10mA 150 mΩ Dynamic Contact Resistance Measured w/ 0.5 V & 50mA , 1.5 ms after closure 200 mΩ Insulation Resistance across Across Contact Contacts Coil - Contact 1012 1012 Breakdown Voltage across Contacts Across Contact Coil - Contact 250 1500 Operate Time incl. Bounce at nominal voltage 0.7 ms Release Time with no coil suppression 0.1 ms Capacitance Across Contact Coil - Contact 1013 Ω VDC 0.2 2.0 pF 1000 106 Cycles Life Expectance Switch Voltage 5V - 10 mA DC <10 pF stray cap. For other load requirements, see the life test section on P. 120. Environmental Data Shock Resistance 1/2 sinus wave for 11 ms 50 g Vibration Resistance 10 - 2000 Hz 20 g Ambient Temperature 10°C/ minute max. allowable -20 70 o C Stock Temperature 10°C/ minute max. allowable -35 95 o C Soldering Temperature 5 sec. 260 o C www.meder.com 203 SIL RF Series MEDER electronic High Frequency SIL Reed Relays COIL DATA Contact Form Switch Model All Data at 20 °C 1A 72 Coil Voltage Coil Resistance Pull In Voltage Drop Out Voltage Nominal Coil Power VDC Ω VDC VDC mW Nom. Max. Min. Typ. Max. Max. Min. Typ. 5 7.5 450 500 550 3.5 0.75 50 12 16 900 1000 1100 8.4 1.8 145 * The pull-in / drop out voltages and coil resistance will change at the rate of 0,4 % / °C. ORDER IFORMATIONEN Part Number Example SIL05 - 1A72 - 74L 05 1A 72 L is the nominal voltage is the contact form is the pin-out is the option Series Nominal Voltage Contact Form Switch Model Pin Out Options SIL XX - 1X XX - XX X Option 05, 12 1A 72 74 L, D OPTIONS L = No option D = With diode and no magnetic shield www.meder.com 204