MEDER electronic KSK-1A35-... KSK-1A35/1-... DIMENSIONS CHARACTERISTICS All dimensions in mm [inches] • Glass length of 10.5 mm and diameter of 2.1 mm • Normally open 1 Form A contact Switch Model → Contact Form → All Data at 20 oC Contact Ratings Conditions CONTACT DATA KSK-1A35-... Form A Min. Typ. Max. Units 10 W Switching Power* Any DC combination of V and A not to exceed their individual max.’s Switching Voltage DC or peak AC 350 V Switching Current DC or peak AC 2.85 mA Carry Current DC or peak AC 70 mA Static Contact Resistance at 0.5 V & 10 mA 150 mΩ Dynamic Contact Resistance measured w/ 0.5 V & 50 mA, 1.5 ms after closure 200 mΩ Insulation Resistance cross Contacts 100 Volts applied 1012 Breakdown Voltage > 60 sec. 600 Operate Time incl. Bounce 100 % overdrive 0.5 ms Release Time measured with/ no coil suppression 0.1 ms Capacitance at 10 kHz across contact Ω VDC pF Test Coil KMS-01 Standard AT range 10 30 AT 50 g Environmental Data Shock Resistance 1/2 sine wave for 11 ms Vibration Resistance 10 - 2000 Hz Ambient Temperature max. 10 oC / minute allowance -20 130 o C Stock Temperature max. 10 C / minute allowance -55 130 o C Soldering Temperature 5 sec. dwell 260 o C 20 o g Note: The indicated electric data are maximum values can vary downwards when using a more sensitive switch. * For life expectancy, please see the “Life Requirements” section. ORDER INFORMATION Series Contact Form Switch Model AT Range (between) KSK - 1A 35/1 - xxxx Options Part Number Example - KSK - 1A35/1 - 2025 2025 is the AT range (Any AT can be ordered between 10 & 30 in a minimum range of 2 AT) 10 - 30 www.meder.com 106