VISHAY SS5P9_11

New Product
SS5P9, SS5P10
www.vishay.com
Vishay General Semiconductor
High Current Density Surface Mount
Schottky Barrier Rectifiers
FEATURES
eSMP ® Series
• Very low profile - typical height of 1.1 mm
• Ideal for automated placement
K
• Guardring for overvoltage protection
• Low forward voltage drop, low power losses
1
• High efficiency
• Low thermal resistance
2
• Meets MSL level 1, per J-STD-020, LF
maximum peak of 260 °C
TO-277A (SMPC)
K
Cathode
• AEC-Q101 qualified
Anode 1
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
Anode 2
• Halogen-free according to IEC 61249-2-21 definition
PRIMARY CHARACTERISTICS
IF(AV)
5.0 A
VRRM
90 V, 100 V
IFSM
150 A
VF at IF = 5.0 A
0.649 V
IR
4.5 μA
TJ max.
150 °C
TYPICAL APPLICATIONS
For use in high frequency rectifier of switching mode power
supplies, freewheeling diodes, DC/DC converters and
polarity protection application.
MECHANICAL DATA
Case: TO-277A (SMPC)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS compliant, and
commercial grade
Base P/NHM3 - halogen-free, RoHS compliant, and
automotive grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
SS5P9
SS5P10
S59
S510
90
100
UNIT
Maximum repetitive peak reverse voltage
VRRM
Maximum average forward rectified current (fig. 1)
IF(AV)
5.0
A
Peak forward surge current 10 ms single half sine-wave
superimposed on rated load
IFSM
150
A
Non-repetitive avalanche energy
at IAS = 2.0 A, TJ = 25 °C
EAS
20
mJ
TJ, TSTG
- 55 to + 150
°C
Operating junction and storage temperature range
Revision: 28-Jun-11
V
Document Number: 88984
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SS5P9, SS5P10
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IF = 2.5 A
TA = 25 °C
IF = 5.0 A
Instantaneous forward voltage
VF (1)
IF = 2.5 A
TA = 125 °C
IF = 5.0 A
Reverse current
TA = 25 °C
Rated VR
Typical junction capacitance
SYMBOL
TA = 125 °C
4.0 V, 1 MHz
IR (2)
CJ
TYP.
MAX.
0.708
-
UNIT
0.832
0.88
0.571
-
0.649
0.68
4.5
15
μA
2.7
5
mA
130
-
pF
V
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
RJA
Typical thermal resistance
SS5P3
(1)
SS5P4
65
3
RJL
UNIT
°C/W
Note
(1) Units mounted on recommended PCB 1 oz. pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
SS5P10-M3/86A
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.10
86A
1500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
SS5P10-M3/87A
0.10
87A
6500
SS5P10HM3/86A (1)
0.10
86A
1500
7" diameter plastic tape and reel
SS5P10HM3/87A (1)
0.10
87A
6500
13" diameter plastic tape and reel
Note
Automotive grade
(1)
Revision: 28-Jun-11
Document Number: 88984
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SS5P9, SS5P10
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 C unless otherwise noted)
100
Instantaneous Reverse Current (mA)
Average Forward Rectified Current (A)
6.0
Resistive or Inductive Load
5.0
4.0
3.0
2.0
TL measured
at the Cathode Band Terminal
1.0
0
90
100
110
120
130
140
TA = 125 °C
0.1
0.01
TA = 25 °C
0.001
150
10
20
30
40
50
60
70
80
90
Lead Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 4 - Typical Reverse Characteristics
5
100
1000
4
D = 0.8
D = 0.5
Junction Capacitance (pF)
D = 0.3
Average Power Loss (W)
1
0.0001
80
D = 0.2
D = 0.1
3
D = 1.0
2
T
1
D = tp/T
tp
4
5
0
100
10
0
1
2
3
6
0.1
1
10
100
Average Forward Current (A)
Reverse Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
Fig. 5 - Typical Junction Capacitance
100
100
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
TA = 150 °C
10
TA = 150 °C
10
TA = 125 °C
1
TA = 25 °C
0.1
0.01
0
0.2
0.4
0.6
0.8
1.0
1.2
Junction to Ambient
10
1
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Revision: 28-Jun-11
Document Number: 88984
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SS5P9, SS5P10
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-277A (SMPC)
0.187 (4.75)
0.175 (4.45)
0.016 (0.40)
0.006 (0.15)
K
0.262 (6.65)
0.250 (6.35)
0.242 (6.15)
0.238 (6.05)
2
1
0.047 (1.20)
0.039 (1.00)
0.171 (4.35)
0.167 (4.25)
0.146 (3.70)
0.134 (3.40)
Mounting Pad Layout
0.087 (2.20)
0.075 (1.90)
0.189 (4.80)
MIN.
0.189 (4.80)
0.173 (4.40)
0.186 (4.72)
MIN.
0.268
(6.80)
0.155 (3.94)
NOM.
0.030 (0.75) NOM.
0.049 (1.24)
0.037 (0.94)
0.050 (1.27)
MIN.
0.084 (2.13) NOM.
0.053 (1.35)
0.041 (1.05)
0.041
(1.04)
0.055 (1.40)
MIN.
Conform to JEDEC TO-277A
Revision: 28-Jun-11
Document Number: 88984
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1