Surface Mount Aluminum Electrolytic Capacitors NAWU Series FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • HIGH TEMPERATURE, EXTEND LIFE (5000 HOURS @ 105°C) • 4X6.3mm ~ 18X22mm CASE SIZES Expanded • DESIGNED FOR REFLOW SOLDERING Capacitance/Voltage • MEETS THE REQUIREMENTS OF AEC-Q200* Range *Contact NIC for supporting test data CHARACTERISTICS 6.3 ~ 400Vdc Rated Voltage Range Rate Capacitance Range 1.0 ~ 220μF Oerating Temp. Range -40°C ~ +105°C Capacitance Tolerance ±20% (M) 0.01CV or 3μA whichever is greater Max. Leakage Current After 2 Minutes @ 20°C W.V. (Vdc) S.V.(Vdc) Tan δ W.V. (Vdc) Z-25°C/Z+20°C Z-40°C/Z+20°C Tan δ @120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz 6.3 8 0.30 6.3 4 10 10 13 0.24 10 3 7 16 20 0.20 16 2 5 < 1000mF = 0.03CV +15mA 25 32 0.16 25 2 3 35 44 0.14 35 2 3 50 63 0.14 50 2 3 > 1000mF = 0.02CV +25mA 160 200 400 200 250 450 0.2 0.2 0.25 160 200 400 3 3 6 6 6 10 100 125 0.18 100 2 3 Capacitance Change Within ± 30% of initial measured value Tan δ Less than 300% of specified max. value Leakage Current Less than specified max. value Load Life Test @ 105°C 5,000hrs PART NUMBER SYSTEM NAWU 100 M 16V 4x6.3 L B Y F RoHS Compliant Series Termination/Packaging Code: S = 100% Sn/13" Reel, LS = 100% Sn/15" Reel B = Sn-Bi/13" Reel, LB = Sn-Bi/15" Reel Peak Reflow Temperature Code Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in mF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10µF Optional: Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site PEAK REFLOW TEMPERATURE CODES Code L K J H G Peak Reflow Temperature 250°C 245°C 240°C 235°C 230°C TERMINATION FINISH & PACKAGING OPTIONS CODES Code Finish & Reel Size B Sn-Bi Finish & 13" Reel LB Sn-Bi Finish & 15" Reel S 100% Sn Finish & 13" Reel LS 100% Sn Finish & 15" Reel Note: 16mm & 18mm diameter parts are only available with Sn finish PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Surface Mount Aluminum Electrolytic Capacitors NAWU Series Cap. (µF) NAWU330M6.3V5X6.3LBF 33 NAWU470M6.3V5X6.3LBF 47 6.3 NAWU101M6.3V6.3X6.3LBF 100 NAWU221M6.3V6.3X8LBF 220 NAWU220M10V5X6.3LBF 22 NAWU330M10V5X6.3LBF 33 10 NAWU470M10V6.3X6.3LBF 47 NAWU101M10V6.3X8LBF 100 NAWU100M16V4X6.3LBF 10 NAWU220M16V5X6.3LBF 22 NAWU330M16V6.3X6.3LBF 16 33 NAWU470M16V6.3X6.3LBF 47 NAWU101M16V6.3X8LBF 100 NAWU100M25V5X6.3LBF 10 NAWU220M25V6.3X6.3LBF 22 25 NAWU330M25V6.3X6.3LBF 33 NAWU470M25V6.3X8LBF 47 NAWU4R7M35V4X6.3LBF 4.7 NAWU100M35V5X6.3LBF 10 35 NAWU220M35V6.3X6.3LBF 22 NAWU330M35V6.3X8LBF 33 NAWU1R0M50V4X6.3LBF 1.0 NAWU2R2M50V4X6.3LBF 2.2 NAWU3R3M50V4X6.3LBF 3.3 50 NAWU4R7M50V5X6.3LBF 4.7 NAWU100M50V6.3X6.3LBF 10 NAWU220M50V6.3X8LBF 22 NAWU100M100V8X10.5JBF 100 10 NAWU100M160V10X10.8JBF 10 NAWU220M160V12.5X14HLBF 22 NAWU330M160V12.5X14HLBF 33 NAWU470M160V16X17GLSF 47 160 NAWU680M160V16X17GLSF 68 NAWU820M160V16X17GLSF 82 NAWU101M160V18X17.5GLSF 100 NAWU121M160V18X22GLSF 120 NAWU3R3M200V8X10.8JBF 3.3 NAWU4R7M200V8X10.8JBF 4.7 NAWU100M200V10X10.8JBF 10 NAWU220M200V12.5X14HLBF 22 NAWU330M200V12.5X14HLBF 200 33 NAWU470M200V16X17GLSF 47 NAWU680M200V16X17GLSF 68 NAWU680M200V18X17.5GLSF 68 NAWU101M200V18X22GLSF 100 NAWU2R2M400V8X10.8JBF 2.2 NAWU3R3M400V10X10.8JBF 3.3 NAWU4R7M400V10X10.8JBF 4.7 NAWU100M400V12.5X14HLBF 400 10 NAWU220M400V16X17GLSF 22 NAWU270M400V18X17.5GLSF 27 NAWU330M400V18X22GLSF 33 For Automotive Equipment see part number system 2 W.V. (Vdc) Dissipaton Factor (Tan δ) 0.30 0.30 0.30 0.30 0.24 0.24 0.24 0.24 0.20 0.20 0.20 0.20 0.20 0.16 0.16 0.16 0.16 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.18 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.25 0.25 0.25 0.25 0.25 0.25 0.25 NIC COMPONENTS CORP. www.niccomp.com NAWU Series RIPPLE CURRENT FREQUENCY CORRECTION FACTOR STANDARD VALUES, PART NUMBERS AND MAXIMUM RIPPLE CURRENT Part Number Surface Mount Aluminum Electrolytic Capacitors Ripple Current Rating (mA @ 105°C/120Hz) 35 38 69 101 30 35 50 81 18 30 48 50 81 25 42 50 63 16 27 44 57 8.0 11 14 19 32 49 55 43 112 137 180 215 235 320 340 31 37 43 112 137 180 215 270 330 25 36 38 57 115 125 160 Load Life Hours @ +105°C 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 Represents New Value www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Frequency Hz 0.1 ~ 1.0μF 2.2 ~ 4.7μF 10 ~ 47μF 100 ~ 220μF 100 < F < 1K 1K < F < 10K 10K < F < 100K 0.50 1.00 1.20 0.65 1.00 1.20 0.80 1.00 1.20 0.80 1.00 1.10 50 120 300 All 160V ~ 400V 0.75 1.00 1.20 100K < F 1.30 1.30 1.30 1.15 1K 1.30 10K < F 1.50 STANDARD PRODUCTS AND CASE SIZE TABLE D x L (mm) Cap Code (µF) 1.0 1R0 2.2 2R2 3.3 3R3 4.7 4R7 10 100 22 220 27 270 33 330 47 470 6.3 5X6.3 5X6.3 10 5X6.3 5X6.3 6.3X6.3 16 4X6.3 5X6.3 6.3X6.3 6.3X6.3 25 5X6.3 5X6.3 6.3X6.3 6.3X8 Working Voltage (Vdc) 35 50 4X6.3 4X6.3 4X6.3 4X6.3 5X6.3 5X6.3 6.3X6.3 6.3X6.3 6.3X8 6.3X8 - 100 8X10.5 - 160 10X10.8 12.5X14 12.5X14 16X17 68 680 - - - - - - - 16X17 82 100 120 220 820 101 121 221 6.3X6.3 6.3X8 6.3X8 - 6.3X8 - - - - - 16X17 18X17.5 18X22 - 200 8X10.8 8X10.8 10X10.8 12.5X14 12.5X14 16X17 16X17 18X17.5 18X22 - 400 8X10.8 10X10.8 10X10.8 12.5X14 16X17 18X17.5 18X22 - Represents New Value DIMENSIONS D x L (mm) Case Size 4x6.3(6.1) 5x6.3 6.3x6.3 6.3X8 8x10.5 8x10.8 10x10.8 12.5x14 16x17 18X17.5 18X22 φD 4.0 5.0 6.3 6.3 8.0 8.0 10.0 12.5 16 18 18 L max.* 6.3 6.3 6.3 8.0 10.5 10.8 10.8 14 17 17.5 *21.5 +0.5 / -1.0 A ± 0.2 B ± 0.2 4.3 4.3 5.3 5.3 6.6 6.6 6.6 6.6 8.3 8.3 8.3 8.3 10.3 10.3 12.8 12.8 16.3 16.3 19.0 19.0 19.0 19.0 I ± 0.2 1.8 2.2 2.5 2.5 2.9 2.9 3.2 4.5 5.5 6.5 6.5 W 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.7 ~ 1.1 0.7 ~ 1.1 0.8 ~ 1.4 1.0 ~ 1.4 1.8 ~ 2.1 1.7 ~ 2.1 1.7 ~ 2.1 P ± 0.2 1.0 1.3 1.8 2.2 3.2 3.2 4.6 4.6 7.0 7.0 7.0 Dφ L 0.3mm max. + I I - W A P B RECOMMENDED LAND PATTERN (mm) Case Dia. a b c 4 1.0 2.6 1.6 5 1.4 3.0 1.6 6.3 2.1 3.5 1.6 8 2.8 4.1 2.1 10 4.3 4.4 2.5 12.5 4.3 5.8 2.5 16 6.6 6.5 5.0 18 6.6 7.7 5.0 Solder Pads + c b NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com a b www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Surface Mount Aluminum Electrolytic Capacitors PEAK REFLOW TEMPERATURE AND DURATION Diameter 6.3 ~ 50V 100V 4 ~ 6.3mm φ 8mm φ 8 ~ 10mm φ 12.5mm φ 160 ~ 400V Time above 200°C (t) 70 sec. max. 60 sec. max. 50 sec. max. 45 sec. max. Time above 217°C (t1) 60 sec. max. 40 sec. max. 30 sec. max. 20 sec. max. Time above 230°C (t2) 40 sec. max. 30 sec. max 20 sec. max. 10 sec. max. NAWU Series CARRIER TAPE DIMENSIONS (mm) Peak Temperature 5 seconds (T) 250°C 240°C 240°C 235°C Case Size A ±0.5 B ±0.2 C ±0.3 D ±0.1 P ±0.1 T ±0.2 t max. S ± 0.1 4 x 6.3(6.1) 4.7 4.7 12.0 5.5 8.0 6.2 0.6 5 x 6.3 5.7 5.7 12.0 5.5 12.0 6.2 0.6 6.3 x 6.3 7.0 7.0 16.0 7.5 12.0 6.2 0.6 6.3 x 8 7.0 7.0 16.0 7.5 12.0 8.2 0.6 8 x 10.8 8.7 8.7 24.0 11.5 16.0 11.1 0.6 10 x 10.8 10.7 10.7 24.0 11.5 16.0 11.2 0.6 12.5 x 14 13.2 13.2 32.0 14.2 24.0 14.3 0.6 28.4 16 x 17 17.5 17.5 44.0 20.2 28.0 17.3 0.6 40.4 18X17.5 19.5 17.5 44.0 20.2 32.0 17.8 0.6 40.4 18X22 19.5 17.5 44.0 20.2 32.0 22.5 0.6 40.4 Capacitors can withstand two times reflow at the above conditions. Second reflow shall be at least one hour after natural cool to room temperature. Peak Temperature (T) 230 (t2) 217 200 (t1) (t) 150 1.5φ+0.1/-0 4 + 0.1 1.75 + 0.15 t D Preheat - 120 seconds max. (150°C ~ 180°C) 100 50 C B Temperature - Deg. C Surface Mount Aluminum Electrolytic Capacitors s Voltage NAWU Series Time (Seconds) A PEAK REFLOW TEMPERATURE AND DURATION Diameter 160 ~ 400V 16 ~ 18mm φ Time above 200°C (t) 30 sec. max. Temperature - Deg. C Voltage Time above 217°C (t1) 15 sec. max. Peak Temperature 5 seconds (T) 230°C Peak Temperature (T) (t1) (t) 150 100 Feeding T REEL QUANTITIES 230 217 200 P Preheat - 120 seconds max. (150°C ~ 180°C) 50 Case Size W±1 4 x 6.3(6.1) 5 x 6.3 6.3 x 6.3 6.3 x 8 8 x 10.8 10 x 10.8 12.5 x 14 16 x 17 18X17.5 18X22 14 14 18 18 26 26 34 46 46 46 Quantity per reel TR13 (330mm) TR15 (380mm) 1200 2000 800 1000 800 1000 500 900 300 500 300 500 250 200 175 125 Time (Seconds) 3.0 ± 0.5 50∅ Min. 21 2. 0 330 or 380mm 13∅ ±0.5 REEL W Review & Compare Reflow Soldering Heat Limits V-chip SMT Aluminum Electrolytic Capacitors www.niccomp.com/RSL 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 5