Surface Mount Aluminum Electrolytic Capacitors NAZU Series SAC Alloy Compatible FEATURES 230°C ~ 260°C • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • LOW IMPEDANCE AT 100KHz RoHS • EXTENDED LOAD LIFE (3,000 @ +105°C) • DESIGNED FOR 260°C REFLOW SOLDERING Compliant includes all homogeneous materials • MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data *See Part P Number N b System S for f Details D il CHARACTERISTICS Rated Voltage Rating Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Miuntes @ 20°C Tan δ @ 120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test @ 105°C at Rated Working Voltage 3,000 hrs 6.3 ~ 50Vdc 10 ~ 330μF -40 ~ +105°C ±20% (M) 0.01CV or 3μA whichever is greater W.V. (Vdc) S.V. (Vdc) Tan δ W.V. (Vdc) Z-25°C/Z+20°C Z-40°C/Z+20°C Capacitance Change Tan δ Leakage Current LOW ESR COMPONENT LIQUID ELECTROLYTE For Performance Data see www.LowESR.com 6.3 8.0 0.28 6.3 4 10 10 16 25 35 50 13 20 32 44 63 0.24 0.22 0.16 0.13 0.12 10 16 25 35 50 3 2 2 2 2 7 5 3 3 3 Within ±30% of initial measured value Less than ±300% of the specified maximum value Less than the specified maximum value STANDARD VALUES AND CASE SIZES (mm) Cap (μF) Code 10 22 33 47 100 150 220 330 100 220 330 470 101 151 221 331 Working Voltage (Vdc) 6.3 10 16 25 35 50 5x6.3 6.3x6.3 5x6.3 5x6.3 6.3x6.3 6.3x6.3 5x6.3 6.3x6.3 6.3x8 5x6.3 6.3x6.3 6.3x6.3 6.3x8 6.3x6.3 6.3x6.3 6.3x8 6.3x6.3 6.3x8 6.3x8 6.3x8 6.3x8 - + Dφ I I - W A L 0.3mm max. P B PART NUMBER SYSTEM NAZU 101 M 16V 6.3x6.3 N B Y F Series PEAK REFLOW TEMPERATURE CODES RoHS Compliant Code Termination/Packaging Code Reflow Temperature Code Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in mF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10μF N Peak Reflow Temperature 260°C TERMINATION FINISH & PACKAGING OPTIONS CODES Code Finish & Reel Size B Sn-Bi Finish & 13" Reel LB Sn-Bi Finish & 15" Reel S 100% Sn Finish & 13" Reel LS 100% Sn Finish & 15" Reel Optional: Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site DIMENSIONS (mm) AND REEL QUANTITIES Case Size φD±0.5 L max. A±0.2 B±0.2 I±0.3 W P±0.3 Qty/Reel 5x6.3 5.0 6.3 5.3 5.3 2.2 0.5~0.8 1.4 800 6.3x6.3 6.3 6.3 6.6 6.6 2.5 0.5~0.8 2.2 800 6.3X8 6.3 8.0 6.6 6.6 2.5 0.5~0.8 2.2 500 PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Surface Mount Aluminum Electrolytic Capacitors NAZU Series STANDARD VALUES, CASE SIZES AND SPECIFICATIONS Cap. W.V. Dissipaton Factor (μF) (Vdc) (Tan δ) NAZU470M6.3V5X6.3NBF 47 0.28 NAZU101M6.3V6.3X6.3NBF 100 0.28 6.3 NAZU221M6.3V6.3X8NBF 220 0.28 NAZU331M6.3V6.3X8NBF 330 0.28 NAZU330M10V5X6.3NBF 33 0.24 10 NAZU151M10V6.3X6.3NBF 150 0.24 NAZU220M16V5X6.3NBF 22 0.22 NAZU470M16V6.3X6.3NBF 47 0.22 NAZU101M16V6.3X6.3NBF 100 16 0.22 NAZU151M16V6.3X8NBF 150 0.22 NAZU221M16V6.3X8NBF 220 0.22 NAZU220M25V5X6.3NBF 22 0.16 NAZU330M25V6.3X6.3NBF 33 0.16 25 NAZU470M25V6.3X6.3NBF 47 0.16 NAZU101M25V6.3X8NBF 100 0.16 NAZU100M35V5X6.3NBF 10 0.13 NAZU220M35V6.3X6.3NBF 22 35 0.13 NAZU470M35V6.3X8NBF 47 0.13 NAZU100M50V6.3X6.3NBF 10 0.12 NAZU220M50V6.3X6.3NBF 22 50 0.12 NAZU330M50V6.3X8NBF 33 0.12 For Automotive Equipment, see part number system NIC Part Number Max. Impedance (Ω) +20°C, 100KHz 1.30 0.70 0.60 0.60 1.30 0.70 1.30 0.70 0.70 0.60 0.60 1.30 0.70 0.70 0.60 1.30 0.70 0.60 2.00 2.00 1.35 Max. Ripple Current (mA) +105°C, 100KHz 95 140 230 230 95 140 95 140 140 230 230 95 140 140 230 95 140 230 70 70 100 Load Life Hours @ +105°C 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 RIPPLE CURRENT FREQUENCY CORRECTION FACTORS 100Hz 0.60 0.75 1KHz 0.75 0.85 10KHz 0.95 0.95 100KHz 1.00 1.00 PEAK REFLOW TEMPERATURE AND DURATION Diameter 5 ~ 6.3mm φ Time above 200°C 80 sec. max. Time above Peak Temperature 230°C 5 seconds 40 sec. max. 260°C Capacitors can withstand two times reflow at the above conditions. Second reflow shall be at least one hour after natural cool to room temperature. Temperature - Deg. C Frequency 10 ~ 33μF 47 ~ 330μF Peak Temperature (see table) 230 Time Above 230°C (see table) 200 150 100 Time Above 200°C (see table) Preheat - 120 seconds max. (150°C ~ 180°C) 50 Time (Seconds) RECOMMENDED LAND PATTERN DIMENSIONS (mm) Case Size a b c 5x6.3 1.4 3.0 1.8 6x3x6.3 6.3x8 2.1 3.5 1.8 Review & Compare Reflow Soldering Heat Limits V-chip SMT Aluminum Electrolytic Capacitors www.niccomp.com/RSL a c b 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com