Multilayer Ceramic Chip Capacitors NMC-L Series FEATURES • LOWER ESR - HIGH Q at HIGH FREQUENCY • STABLE NPO CHARACTERISTICS OVER TEMPERATURE AND VOLTAGE • EIA 0201, 0402, 0603 & 0805 CASE SIZES • WIDE CAPACITANCE (UP TO 3,300pF) & VOLTAGE RANGE (UP TO 100VDC) SPECIFICATIONS Case Sizes Capacitance Range* Capacitance Tolerance Operating Temperature Range Temperature Characteristics Rated Voltage Q Factor* ESR Insulation Resistance Dielectric Withstanding Voltage Test Conditions (Cap. & Q) EIA Case Size Length (L) Width (W) Thickness (T) Termination Width (P) 0201 1.0pF ~ 15pF NPO 0402 0603 0805 0.5pF ~ 470pF 0.5pF ~ 3300pF 1.0pF ~ 150pF RoHS Compliant Cap. Values < 5pF: ±0.1pF(B), ±0.25pF(C) Cap. Values 5pF ~ 8.2pF: ±0.25pF(C), ±0.5pF(D) Cap. Values >10pF: ±1%(F), ±2%(G), ±5% (J) Includes all homogeneous materials -55°C ~ +125°C 0 ± 30PPM/°C 16Vdc, 25Vdc, 50Vdc 16Vdc, 25Vdc, 50Vdc & 100Vdc Cap. Values <30pF: Q > 400 + 20C Cap. Values >30pF: Q > 1000 Cap. Values < 2.2pF: <1000mΩ@900MHz ± 100MHz Cap. Values 2.2pF ~ 470pF: <500mΩ@900MHz ± 100MHz Cap. Values >470pF: <500mΩ@60MHz ± 10MHz 10,000 Megohms min. @ +25°C 250% of rated voltage for 1 ~ 5 seconds *1.0 ± 0.2Vrms, 1MHz ±10% (<1000pF) or 1KHz ± 10% (>1000pF) 0201 0402 0603 0.6 ± 0.05 1.0 ± 0.05 1.6 ±0.10 0.3 ± 0.05 0.5 ± 0.05 0.8 ± 0.10 0.33 max. 0.60 max. 1.0 max. 0.10 ~ 0.20 0.15 ~ 0.30 0.12 ~ 0.55 0805 2.0 ±0.10 1.25 ± 0.10 1.3 max. 0.25 ~ 0.71 *See See Part Number System for Details W T P P L 100% Sn over Ni barrier PART NUMBER SYSTEM NMC-L 0603 NPO 100 J 50 TRP 7C3 F Series RoHS Compliant RoHS 7C-III Exemption Free* Tape & Reel (Punched carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) * - Part Number Level Identification of NPO MLCCs that do not take RoHS exemption 7C-III ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Multilayer Ceramic Chip Capacitors EIA Case Size 0201 2.0 0.6 ± 0.05 Width (W) 0.3 ± 0.05 Thickness max. (T) 0.33 max Termination Width (P) 0.10 ~ 0.20 Capacitance (pF) 0.5 0.6 0.7 0.8 0.9 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 110 120 130 150 25V 0402 1.0 ± 0.05 0.5 ± 0.05 0.55 max. 0.15 ~ 0.30 16 0.700Ω max. ESR @ 1GHz 0.385Ω max. ESR @ 1GHz 180 0603 1.6 ±0.10 0.8 ± 0.10 0.87 max. 0.25 ~ 0.55 Working Voltage (Vdc) 100 16 25 50 50 0805 2.0 ± 0.1 1.25 ± 0.1 1.30 max. 0.25 ~ 0.71 100 50 100 0.700Ω max. ESR @ 500MHz 0.700Ω max. ESR @ 500MHz 0.700Ω max. ESR @ 500MHz 0.385Ω max. ESR @ 500MHz 0.385Ω max. ESR @ 500MHz 0.385Ω max. ESR @ 500MHz 0.300Ω max. ESR @ 500MHz 0.300Ω max. ESR @ 500MHz 0.300Ω max. ESR @ 500MHz 0.260Ω max. ESR @ 500MHz 0.260Ω max. ESR @ 500MHz 0.260Ω max. ESR @ 500MHz 0.500Ω max. ESR @ 500MHz 0.400Ω max. ESR @ 500MHz 0.260Ω max. ESR @ 500MHz 500mΩ max. ESR @ 900MHz 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 25 NMC-L Series 500mΩ max. ESR @ 900MHz 500mΩ max. ESR @ 900MHz 500mΩ max. ESR @ 900MHz 500mΩ max. ESR @ 60MHz 500mΩ max. ESR @ 60MHz ® 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC-L Series ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Multilayer Ceramic Chip Capacitors NMC-L Series ® 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors REEL Taping Specifications REEL DIMENSIONS (mm) Reel Diameter (A) 7” (178 ± 2.0) 10” (250 ± 2.0) 13” (330 ± 2.0) B D B C 50 min. 100 ± 1.0 100 ± 1.0 13 ± 0.5 D T max. 8.4 +1.0/-0 (1812 case size 12.4 +2.0/-0) 21 ± 1.0 7 INCH REEL QUANTITIES* Size Tape Size Min. Qty Per Reel Max. Qty Per Reel C 01005 8mm 0201 8mm 0402 8mm 0603 8mm 0805 8mm 1206 8mm 1210 8mm 1812 12mm 20,000 20,000 10,000 4,000 4,000 4,000 2,000 1,000 20,000 20,000 10,000 4,000 5,000 5,000 5,000 2,000 *Quantity dependent on chip thickness. Contact NIC for reel quantities on larger diameter reels. CARRIER TAPE MATERIAL T Parts with a thickness of >1mm will be taped on embossed plastic carrier. Parts with a thickness of less then 1mm will be taped on paper carrier A EMBOSSED PLASTIC CARRIER TAPE DIMENSIONS (mm) Tape Size W F 8mm 8.0 ± 0.2 3.5 ± 0.05 12mm 12 ± 0.2 5.5 ± 0.05 E P0 P2 D K max. 1.75 ± 0.10 4.0 ± 0.1 2.0 ± 0.5 1.5 +0.1-0.0 3.0 Notes: 1. Specifications are in compliance with EIA RS481-1-A “Taping of surface Mount Components for Automatic Placement” 2. Dimensions Ao (max.) equals component width dimension plus 0.5mm 3. Dimension Bo (max.) equals component length dimension plus 0.5mm T max. P 2.0 4.0 ± 0.1 4.5 8.0 ± 0.1 EMBOSSED PLASTIC CARRIER TAPE D Po T E P2 F Bo W Ao P K See notes 2 & 3 regarding dimensions Ao and Bo PUNCHED CARRIER TAPE DIMENSIONS (mm) Type Ao Bo 01005 0.25 ± 0.04 0.45 ± 0.04 0201 0.37 ± 0.03 0.67 ± 0.05 0402 0.65 ± 0.05 1.15 ± 0.05 0603 1.1 ± 0.2 1.9 ± 0.2 0805 1.65 ± 0.2 2.4 ± 0.2 1206 2.0 ± 0.2 3.6 ± 0.2 W F E P1 P0 D0 4.0 ± 0.1 1.5 +0.1/-0.0 2.0 ± 0.05 8.0 ± 0.3 3.5 ± 0.05 1.75 ± 0.1 4.0 ± 0.10 T1 max. 0.27 0.45 T2 max. 0.36 0.80 1.1 1.4 Mounting Hole Angular Punch Hole PUNCHED CARRIER TAPE D Po t1 E F Bo ® t2 NIC COMPONENTS CORP. www.niccomp.com Ao W P1 Component Pitch www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 5