Hybrid Surface Mount Aluminum Electrolytic Capacitors NSPE Series FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • SUPER LOW ESR & HIGH RIPPLE CURRENT RoHS • CAPACITANCE VALUES UP TO 820μF Compliant • 6.3x6.3mm ~ 10x10.8mm CASE SIZES includes all homogeneous materials • DESIGNED FOR REFLOW SOLDERING *See Part Number System for Details CHARACTERISTICS 4 ~ 10Vdc 22 ~ 820µF -55 ~ +105°C ±20% (M) Less than 0.1CV or 50µA whichever is greater W.V. (Vdc) S.V. (Vdc) All Case Sizes Z -55°C/Z +20°C Z +105°C/Z +20°C Capacitance Change Tan δ Leakage Current Rated Voltage Range Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Minutes @ 20°C Working and Surge Voltage Ratings Tan δ @ 120Hz/20°C Impedance Ratio Load Life Test @ 105°C 6.3mm Dia. and All 4Vdc parts = 1,000 Hours 8mm ~ 10mm Dia. parts = 2,000 Hours LOW ESR COMPONENT HYBRID ELECTROLYTE For Performance Data see www.LowESR.com 4 4.6 0.24 6.3 10 7.2 11.5 0.22 0.20 2.5 1.0 Within ±20% of initial measured value Less than 200% of specified max. value Less than specified max. value STANDARD PRODUCT AND CASE SIZE TABLE Dφ x L (mm) Working Voltage (Vdc) 4.0 6.3 10 22 220 6.3 x 6.3 33 330 6.3 x 6.3 47 470 6.3 x 6.3 100 101 6.3 x 6.3 8 x 10.8 150 151 8 x 10.8 220 221 8 x 10.8 8 x 10.8 8 x 10.8* 330 331 8 x 10.8 10 x 10.8 390 391 8 x 10.8 10 x 10.8 10 x 10.8 10 x 10.8* 470 471 8 x 10.8 560 561 10 x 10.8 680 681 10 x 10.8 820 821 10 x 10.8 *Low temperature reflow soldering only Cap (µF) Dφ Code + L max. 6.3 10.8 10.8 A/B ±0.2 6.8 8.3 10.3 W 0.5 ~ 0.8 0.7 ~ 1.0 1.1 ~ 1.4 I ±0.2 2.55 2.9 3.2 I I A P B P ±0.2 2.2 3.2 4.6 Part Marking Series Code PART NUMBER SYSTEM NSPE 471 M 4V 8x10.8 TR 13 F Series - W DIMENSIONS (mm) Dφ ±0.5 6.3 8.0 10 L 0.3mm max. RoHS Compliant 97% Sn (min.), 3% Bi (max.) 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in μF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10μF Lot Code E17 470 4V Capacitance Value Voltage PRECAUTIONS Please review the notes on correct use, safety and precautions found on at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Hybrid Aluminum Electrolytic Capacitors NSPE Series STANDARD VALUES, CASE SIZES & SPECIFICATIONS Working Voltage NSPE471M4V8X10.8TR13F Cap. (μF) 470 Max. ESR (mΩ) AT 100KHz/20°C 30 Max. Ripple Current (mA rms) AT 100KHz/105°C 1,550 NSPE681M4V10X10.8TR13F 680 4 25 2,090 Part Number NSPE821M4V10X10.8TR13F 820 23 2,180 NSPE101M6.3V6.3X6.3TR13F 100 50 1,120 NSPE221M6.3V8X10.8TR13F 220 30 1,550 NSPE331M6.3V8X10.8TR13F 330 30 1,550 NSPE391M6.3V8X10.8TR13F 390 30 1,550 NSPE471M6.3V10X10.8TR13F 470 25 2,090 NSPE561M6.3V10X10.8TR13F 560 25 2,090 NSPE220M10V6.3X6.3TR13F 22 60 1,020 NSPE330M10V6.3X6.3TR13F 33 60 1,020 NSPE470M10V6.3X6.3TR13F 47 60 1,020 NSPE101M10V8X10.8TR13F 100 30 1,550 NSPE151M10V8X10.8TR13F 150 30 1,550 NSPE221M10V8X10.8TR13F 220 NSPE331M10V8X10.8TR13F* NSPE331M10V10X10.8TR13F 6.3 10 330 30 1,550 30* 1,550* 25 2090 NSPE391M10V10X10.8TR13F 390 25 2,090 NSPE471M10V10X10.8TR13F* 470 25* 2,090* *Low temperature reflow soldering only PEAK TEMPERATURE AND DURATION Preheat (120 sec. max.) 6.3mm/4V ~ 10V 150°C ~ 180°C 8.0mm/4V ~ 10V 150°C ~ 180°C 10mm/4V ~ 10V 150°C ~ 180°C NSPE471M6.3V10x10.8TRxxF 150°C ~ 180°C NSPE331M10V8x10.8TRxxF <150°C NSPE471M10V10x10.8TRxxF Diameter/Voltage Peak Temperature 250°C/5 sec. 240°C/5 sec. 235°C/5 sec. 240°C/5 sec. Time above 200°C 60 sec. max. 60 sec. max. 50 sec. max. 60 sec. max. Time above 230°C 40 sec. max. 30 sec. max. 5 sec. max. 30 sec. max. 230°C/5 sec. 30 sec. max. - LAND PATTERN DIM. (mm) Case Dia. 6.3 8 10 A 3.5 4.2 4.4 B 1.6 2.2 2.2 P 1.9 3.1 4.5 Temperature - Deg. C RECOMMENDED REFLOW SOLDERING PROFILE Peak Temperature (see table) 230 200 150 100 + - Time Above 230°C (see table) B Time Above 200°C (see table) Preheat - 120 seconds max. (see table for temperature) 50 A P A Time (Seconds) Review & Compare Reflow Soldering Heat Limits V-chip SMT Aluminum Electrolytic Capacitors www.niccomp.com/RSL 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com