Ordering Codes, Packaging, Handling

General
Literature
S p e c ial To p i c s
Sensors and Controllers:
Ordering Codes,
Packaging,
Handling
Edition Sept 10, 2015
GL000002_005EN
Ordering Codes, Packaging, Handling
Contents
Page
Section
Title
4
4
5
5
5
6
6
7
7
8
9
1.
1.1.
1.2.
1.3.
1.4.
1.5.
1.6.
1.7.
1.8.
1.9.
1.10.
Ordering Codes for Sensors
Overview
Product Group “XXX”
Product Type “NNNN”
Package “PA”
Capacitor Configuration “Y”
Temperature Range “T”
Configuration “C”
Packaging “P”
Quantity “Q”
Special Procedure “SP”
10
10
10
11
11
11
11
11
2.
2.1.
2.2.
2.3.
2.4.
2.5.
2.6.
2.7.
Ordering Codes for Controllers
Overview
Controller Type “HVC 2480B”
Package Code “PA”
Product Revision “B2”
ROM ID “2955”
Finishing Code “T”
Special Procedure “000”
12
12
12
13
14
15
18
20
25
30
32
35
36
3.
3.1.
3.2.
3.3.
3.4.
3.5.
3.6.
3.7.
3.8.
3.9.
3.10.
3.11.
3.12.
Forms of Delivery, Marking, and Packaging for Sensors and Controllers
Special Marking of Prototype Parts
Date Code Example
Packaging Labels
Tape Reeling and Label Area on the Reel
Package SOIC8
Package SOT23
Package SOT89B
Package TO92UA/TO92UT
Package TO92UP
Package TSSOP14
Package PQFN40-2 (6 x 8 mm)
Package PQFN40-4 (6 x 6 mm)
39
4.
Document History
Micronas
Sept. 10, 2015; GL000002_005EN
2
Ordering Codes, Packaging, Handling
Copyright, Warranty,
and Limitation of
Liability
The information and data contained in this document are believed to be accurate and
reliable. The software and proprietary information contained therein may be protected
by copyright, patent, trademark and/or other intellectual property rights of Micronas. All
rights not expressly granted remain reserved by Micronas.
Micronas assumes no liability for errors and gives no warranty representation or guarantee regarding the suitability of its products for any particular purpose due to these
specifications.
By this publication, Micronas does not assume responsibility for patent infringements or
other rights of third parties which may result from its use. Commercial conditions, product availability and delivery are exclusively subject to the respective order confirmation.
Any information and data which may be provided in the document can and do vary in
different applications, and actual performance may vary over time.
All operating parameters must be validated for each customer application by customers’ technical experts. Any new issue of this document invalidates previous issues.
Micronas reserves the right to review this document and to make changes to the document’s content at any time without obligation to notify any person or entity of such revision or changes. For further advice please contact us directly.
Do not use our products in life-supporting systems, military, aviation, or aerospace
applications! Unless explicitly agreed to otherwise in writing between the parties, Micronas’ products are not designed, intended or authorized for use as components in systems intended for surgical implants into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the product could
create a situation where personal injury or death could occur.
No part of this publication may be reproduced, photocopied, stored on a retrieval system or transmitted without the express written consent of Micronas.
Micronas Trademarks
– HAL
Third-Party Trademarks
All other brand and product names or company names may be trademarks of their
respective companies.
Micronas
Sept. 10, 2015; GL000002_005EN
3
Ordering Codes, Packaging, Handling
1. Ordering Codes for Sensors
Release Note:
This document is intended as a guideline for ordering and handling
Micronas Hall sensors and controllers and is not to be considered as a
delivery specification with guaranteed values.
1.1.
Overview
The product group “Sensors” from Micronas comprises several Hall sensor families of
switches, linear sensors, direct-angle sensors and current sensors available in a variety
of packages, packaging variants, and temperature ranges.
This section gives an overview of the packaging variants and explains the ordering
code system for our sensors.
Fig. 1–1:
Key to Ordering Codes Sensors
First, all components of the ordering codes are explained separately. In section 3, from
page 12 onwards, the complete ordering codes, forms of delivery, marking and the
packaging variants for each package are shown.
The sensor type is determined by the application, the product group, the package and
the temperature range.
Micronas
Sept. 10, 2015; GL000002_005EN
4
Ordering Codes, Packaging, Handling
1.2.
Product Group “XXX”
The first three characters of the ordering codes are fixed to determine the product
group:
Table 1–1:
Product Group
Product Group
1.3.
Description
CUR
Hall-Effect Current Sensors
HAL
Hall-Effect Sensor
HAC
Hall Sensor with Integrated Caps
HAR
Hall Sensor Redundant
Product Type “NNNN”
The following three to four digits are reserved for the designation of the product. For
example, the sensor type “3625” refers to the Hall sensor “HAL 3625”. A detailed
description of functions, features, and parameters can be found in the related data
sheet “HAL 3625”.
1.4.
Package “PA”
Hall sensors from Micronas are available in the following packages:
Table 1–2:
Sensor package codes
Package Code
Micronas
Package
Pins
DJ, DZ
SOIC8
SMD
SU
SOT23
SMD
SF, TQ
SOT89B
SMD
UA, JQ
TO92UA
leaded
UP, CV
TO92UP
leaded
UT
TO92UT
leaded
GP
TSSOP14
SMD
Sept. 10, 2015; GL000002_005EN
5
Ordering Codes, Packaging, Handling
1.5.
Capacitor Configuration “Y”
Our Hall Sensors with integrated caps have the following capacitor value cross reference. The capacitor availability offered for the product can be found in the corresponding data sheet.
Table 1–3:
Capacitance codes
Capacitance
Code “Y” /
Capacitor from
VSUP to GND
Capacitor from
OUT to GND
Cap size EIA
Code
G
10 nF
No cap
0402
L
100 nF
10 nF
0402
W
100 nF
No cap
0402
M
100 nF
100 nF
0402
H
100 nF
1 nF
0603
J
100 nF
100 nF
0603
R
330 nF
330 nF
0603
Letter Cross
Reference
1.6.
Temperature Range “T”
The Hall sensors from Micronas are suitable for the following temperature ranges:
Table 1–4:
Temperature codes
Temperature Code
Junction temperature range (TJ) of the sensors
min.
max.
C
0 C
85 °C
E
40 C
100 °C
I
20 C
125 C
K
40 C
140 C
A
40 C
170 C
Note: The specified temperature ranges for all sensors in this brochure and in the data
sheets always refer to the junction temperature. On account of self-heating, the
junction temperature (TJ) is always higher than the ambient temperature (TA).
The relationship between junction temperature and ambient temperature is
explained in the data sheet section „Application Notes“. This allows the calculation of the maximum permissible ambient temperature for the appropriate application.
The maximum permissible ambient temperature is always lower than the specified junction temperature.
Micronas
Sept. 10, 2015; GL000002_005EN
6
Ordering Codes, Packaging, Handling
1.7.
Configuration “C”
Three different configurations are offered. Please refer to Table 1–5.
The packages TO92UA and TO92UT are offered in two different configurations. The
basic type has straight legs (inline, not spread; configuration code “2”). For simple PCB
designs, this package is also available with spread legs (inline, spread;
configuration code “1“).
Table 1–5:
Description of the Configuration Codes
Configuration Code
Configuration
1
Inline, spread
TO92UA or TO92UT
2
Inline, not spread
TO92UA, TO92UT or TO92UP
4
SMD
SOIC8, SOT23, SOT89, TSSOP14
on carrier tape
1.8.
Packaging “P”
Depending on the sensor package, different packaging variants are offered:
All sensors in packages TO92UA and TO92UT are available with straight legs (configuration inline, not spread) in bulk and carrier tape form (Ammopack, according to
IEC 286). Spread legs are only available in carrier tape.
The TO92UP package is only available with straight legs in carrier tape.
The packages SOT23, SOT89B, SOIC8 and TSSOP14 are available in carrier tape on
reels according to IEC 286.
Table 1–6:
Packaging Codes
Packaging Code
Delivery
Package
B
Bulk
TO92UA and TO92UT
A
Ammopack
TO92UA, TO92UT and TO92UP
R
Reel
SOIC8, SOT23, SOT89B, and
TSSOP14
Note: Possible combinations of packaging code and Quantity Code can be found on
Table 1–8 on page 9 and Table 1–9 on page 9
Micronas
Sept. 10, 2015; GL000002_005EN
7
Ordering Codes, Packaging, Handling
1.9.
Quantity “Q”
The sensors are delivered in different packaging units and quantities. The packaging
size is determined by the inner packaging (basic unit) and the outer packaging (cardboard box).
Only entire packaging units (outer packaging) can be ordered.
Table 1–7:
Quantity
Code
1
Delivery Quantities
Outer
Packaging
Inner
Packaging
2000
1000
Package and Form Of Delivery
TO92UA/UT Bulk: 2 bags with 1000 sensors each
or
SOT89B/SOIC8: 2 Reels with 1000 sensors each
2
2000
2000
TO92UA/UT/UP Ammopack
1 tape with 2000 sensors
5
15000
5000
SOT89B Reel
3 reels with 5000 sensors each
6
20000
10000
SOT23 Reel
2 reels with 10000 sensors each
8
7000
3500
SOIC8 Reel
2 reels with 3500 sensors each
9
8000
4000
TSSOP14 Reel
2 reels with 4000 sensors each
Packaging for each package is described from page 12 onwards.
Micronas
Sept. 10, 2015; GL000002_005EN
8
Ordering Codes, Packaging, Handling
The following tables show possible variants of configuration, packaging, and quantity
depending on the sensor’s package.
Table 1–8:
Available variants for TO92UA / TO92UT / TO92UP
Configuration Code
Packaging Code
Quantity Code
1 (=spread)*
A (=Ammopack)*
2
2 (=non-spread)
A (=Ammopack)
2
2 (=non-spread)
B (=Bulk)
1
*not available for HAL 1xy, HAL 2xy and TO92UP package
Table 1–9:
Available variants for SOIC8, SOT89B, SOT23 and TSSOP14
Configuration Code
Packaging Code
Quantity Code
4 (=SOIC8)
R (=Reel)
8
4 (=SOT23)
R (=Reel)
6
4 (=SOT89B)
R (=Reel)
1 (2000 pcs.)
or 5 (15000 pcs.)
4 (=TSSOP14)
R (=Reel)
9
Starting with Chapter 3.5 an overview per package with examples and the complete
ordering codes is given.
1.10.
Special Procedure “SP”
These two digits of the ordering code are reserved for customer-specific variants (special conditions). Should this be the case, please use the number code provided by
Micronas.
The value “00” is used for standard parts.
Micronas
Sept. 10, 2015; GL000002_005EN
9
Ordering Codes, Packaging, Handling
2. Ordering Codes for Controllers
2.1.
Overview
This section gives an overview of the packaging variants and explains the ordering
code system for the product group “Controllers”.
Fig. 2–2:
Key to Ordering Codes Controllers
First, all components of the ordering codes are explained separately. The complete
ordering codes, forms of delivery, marking and the packaging variants for each package are shown in “Section 3., Forms of Delivery, Marking, and Packaging for Sensors
and Controllers on page 12”.
The controller is determined by the type, the package, and the finishing variant.
2.2.
Controller Type “HVC 2480B”
The first eight characters are reserved for the designation of the product. A detailed
description of functions, features, and parameters can be found in the related data
sheets, for example “HVC 2480B” or “HVC 4223F”.
10
Sept. 10, 2015; GL000002_005EN
Micronas
Ordering Codes, Packaging, Handling
2.3.
Package Code “PA”
The controllers from Micronas are available in the following packages:
Table 2–10: Package codes controllers
Package Code
2.4.
Package
DV
PQFN40-2 (6 x 8 x 0.9 mm)
DL
PQFN40-4 (6 x 6 x 0.85 mm)
Product Revision “B2”
These two characters refer to the hard- and software revision of the controller and is
also mentioned in the related data sheet.
2.5.
ROM ID “2955”
These four digits refer to the customer-specific software and is optional.
2.6.
Finishing Code “T”
Character “T” shows the finishing code. All our controllers are offered in trays.
2.7.
Special Procedure “000”
These three digits of the ordering code are reserved for customer-specific variants
(special conditions). Should this be the case, please use the number code provided by
Micronas.
The value “000” is used for standard parts.
Micronas
Sept. 10, 2015; GL000002_005EN
11
Ordering Codes, Packaging, Handling
3. Forms of Delivery, Marking, and Packaging
for Sensors and Controllers
In this section, possible forms of delivery and the appropriate ordering codes examples
are shown. The available variants (product type, package and temperature range) are
listed in each data sheet.
The product information is marked on top of the package (branded side). For the sensors, the upper row includes the designation of the sensor and the junction temperature
range TJ. Marking corresponds to the information in the data sheets (section “ordering
information”).
For Operating Junction Temperature Range (TJ) refer to Table 1–4 on page 6
For the controllers, the product information is also marked on the top of the package
and is explained in the corresponding package chapter starting with “Package
PQFN40-2 (6 x 8 mm)” on page 35
3.1.
Special Marking of Prototype Parts
For sensors:
Prototype parts are coded with an underscore beneath the temperature range letter
and on each product. They may be used for lab experiments and design-ins but are not
intended to be used for qualification tests or as production parts. For package SOT23
the underscore beneath the last digit of the product name shows that these are prototype parts.
For controllers:
Prototype parts are marked with characters “ES” on each product. They may be used
for lab experiments and design-ins but are not intended to be used for qualification
tests or as production parts.
3.2.
Date Code Example
Date Code
1st Digit
2nd Digit and 3rd Digit
4th Digit
Year (0...9)
Week (1...52)
Day (1...7)
3=2013,
4=2014,
5=2015
etc.
01=Week 1
to
52=Week 52
1=Monday
to
7=Sunday
Example:
The Date Code on the sensor/controller is 5195.
These products have been finished in 2015, week 19 on the fifth day (Friday): This was
May 8th, 2015.
Micronas
Sept. 10, 2015; GL000002_005EN
12
Ordering Codes, Packaging, Handling
3.3.
Packaging Labels
Both the outer packaging, as well as the inner packaging units are labelled with all relevant
information. Fig. 3–3 and Fig. 3–4 give an example describing each element separately.
Fig. 3–3:
Information on the label for sensors (excluding packages SOIC8 and
TSSOP14)
Fig. 3–4:
Information on the label for controllers and sensors in package SOIC8 and
TSSOP14
The complete ordering code plus optional internal information is printed on the label.
The Micronas code number refers to this ordering code. Every packaging variant is
defined by the complete ordering code or the Micronas code number.
Moreover, the label contains the Date Code, the quantity of sensors, and the lot number
(Micronas charge number).
Note: The lot number on the label enables internal backtracking of the sensor. In case
of further inquiries, please provide us with this number or a copy of the label.
The Date Code on the label represents the finishing code of the complete packing unit. It can differ from the Date Code on the sensor package or from the Date
Code on the inner bag label.
Micronas
Sept. 10, 2015; GL000002_005EN
13
Ordering Codes, Packaging, Handling
The label includes two barcode markings for automatic registration. The upper barcode
starts with “W”, followed by the Micronas product number, the Date Code and the quantity. The lower barcode contains the lot number (Micronas charge number).
3.4.
Tape Reeling and Label Area on the Reel
The SMD Devices are delivered in tape and reel and are labelled according to
IEC 60286-3.
Fig. 3–5:
Micronas
Tape reeling and label area on the reel
Sept. 10, 2015; GL000002_005EN
14
Ordering Codes, Packaging, Handling
3.5.
Package SOIC8
For package SOIC8 the sensors are delivered with Quantity Code “8”. They are
shipped in a cardboard box containing 7000 pieces (2 reels with 3500 sensors each) in
dry pack.
The cardboard box has two labels; each reel is individually labelled.
Carrier Tape 12 mm
Reel Diameter 330 mm
Die-Up Package
Configuration Code:4 SMD (SOIC8)
Packaging Code:
R (Reel)
Quantity Code:
8
Packing unit: Two reels with 3500 pcs. each
Minimum Order Quantity: 7000
Example:
HAL3625DJ-A-4-R-8-00
Carrier Tape 12 mm
Reel Diameter 330 mm
Die-Down Package
Configuration Code:4 SMD (SOIC8)
Packaging Code:
R (Reel)
Quantity Code:
8
Packing unit: Two reels with 3500 pcs. each
Minimum Order Quantity: 7000
Example:
CUR3115DZ-A-4-R-8-00
Micronas
Sept. 10, 2015; GL000002_005EN
15
Ordering Codes, Packaging, Handling
Marking:
Line 1: Product Name / Temperature Range
Line 2: Lotnumber
Line 3: Datecode / Option 1 (optional)
Packaging:
All sensors in the package SOIC8 are available in this packaging variant.
The appropriate order codes are HALxxxxDJ-x-A-R-8-00 or HALxxxxDZ-x-A-R-8-00.
Fig. 3–6:
Micronas
SOIC8 reel
Sept. 10, 2015; GL000002_005EN
16
Ordering Codes, Packaging, Handling
Fig. 3–7:
SOIC8 reel in Dry Pack
Fig. 3–8:
SOIC8 cardboard box including two reels in Dry Pack
Dimensions in mm
Length
395
Micronas
Cardboard Box
Width
395
Height
120
Sept. 10, 2015; GL000002_005EN
Reel
Diameter
330
17
Ordering Codes, Packaging, Handling
3.6.
Package SOT23
For package SOT23 the sensors are delivered with Quantity Code “6”. They are
shipped in a cardboard box containing 20000 pieces (2 reels with 10000 sensors
each).
The cardboard box has two labels; each reel is individually labelled.
Form of Delivery and Example:
Blister Tape 12 mm
Reel Diameter 330 mm
Configuration Code: 4 SMD (SOT23)
Packaging Code:
R (Reel)
Quantity Code:
6
Packing unit: Two reels with 10000 pcs. each
Minimum Order Quantity: 20000)
Example:
HAL1502SU-A-4-R-6-00
Marking:
Line 1: Product Name
Line 2: Underscore Marking Option for Temperature Range / Engineering Samples
Bottom Side: Trace Code
Packaging:
All sensors in the package SOT23 are available in this packaging variant.
The appropriate order code is HALxxxxSU-x-4-R-6-00
Micronas
Sept. 10, 2015; GL000002_005EN
18
Ordering Codes, Packaging, Handling
Fig. 3–9:
SOT23 reel
Fig. 3–10: SOT23 cardboard box including two reels
Dimensions in mm
Length
340
Micronas
Cardboard Box
Width
340
Height
110
Sept. 10, 2015; GL000002_005EN
Reel
Diameter
330
19
Ordering Codes, Packaging, Handling
3.7.
Package SOT89B
Sensors in the package SOT89B are delivered with Quantity Code “1” in a cardboard
box containing 2000 pieces. (2 reels with 1000 sensors each) or with Quantity Code “5”
in a cardboard box containing 15000 pcs. (3 reels with 5000 sensors each).
The cardboard box has two labels; each reel is individually labelled.
Forms of Delivery and Example
Carrier Tape 12 mm
Reel Diameter 180 mm
Configuration Code:4 SMD (SOT89B)
Packaging Code:
R (Reel)
Quantity Code:
1
Packing Unit: Two reels with 1000 pcs. each
Minimum Order Quantity: 2000 pcs.
Example:
HAL 320SF-A-4-R-1-00
Carrier Tape 12 mm
Reel Diameter 330 mm
Configuration Code:4 SMD (SOT89B)
Packaging Code:
R (Reel)
Quantity Code:
5
Packing Unit: Three reels with 5000 pcs. each
Minimum Order Quantity: 15000 pcs.
Example:
HAL 320SF-A-4-R-5-00
Micronas
Sept. 10, 2015; GL000002_005EN
20
Ordering Codes, Packaging, Handling
Marking:
Line 1: Product Name / Temperature Range
Line 2: Date Code / Option 1 (optional)
Bottom Side: Trace Code (optional)
Packaging Quantity Code 1 (2000 pcs.):
The appropriate order codes are HAL xxxSF-x-4-R-1-00 or HAL xxxTQ-x-4-R-1-00
Fig. 3–11: SOT89B Quantity Code “1” reel
Micronas
Sept. 10, 2015; GL000002_005EN
21
Ordering Codes, Packaging, Handling
Fig. 3–12: SOT89B Quantity Code “1” cardboard box inner view
Fig. 3–13: SOT89B Quantity Code “1” cardboard box closed including two reels
Dimensions in mm
Length
208
Micronas
Cardboard Box
Width
190
Height
40
Sept. 10, 2015; GL000002_005EN
Reel
Diameter
180
22
Ordering Codes, Packaging, Handling
Packaging Quantity Code 5 (15000 pcs.):
The appropriate order codes are HAL xxxSF-x-4-R-5-00 or HAL xxxTQ-x-4-R-5-00.
Fig. 3–14: SOT89B Quantity Code “5” reel
Fig. 3–15: SOT89B Quantity Code “5” cardboard box inner view
Micronas
Sept. 10, 2015; GL000002_005EN
23
Ordering Codes, Packaging, Handling
Fig. 3–16: SOT89B Quantity Code “5” cardboard box closed including three reels
Dimensions in mm
Length
340
Micronas
Cardboard Box
Width
340
Height
115
Sept. 10, 2015; GL000002_005EN
Reel
Diameter
330
24
Ordering Codes, Packaging, Handling
3.8.
Package TO92UA/TO92UT
The sensors in the package TO92UA or TO92UT are delivered with Quantity Code “1”
in bulk or with Quantity Code “2” in carrier tape (Ammopack). They are shipped in a
cardboard box containing 2000 pieces (for bulk 2 bags with 1000 sensors each and for
Ammopack one carrier tape with 2000 sensors). The cardboard box has two labels.
Forms of Delivery:
Ammopack Inline
spread
Configuration Code:1 (TO92UA / TO92UT,
spread)
Packaging Code:
A (Ammopack)
Quantity Code:
2
Packing Unit / Minimum Order Quantity:
One Ammopack with 2000 pcs.
Example:
HAL1820UA-A-1-A-2-00
Ammopack Inline
not spread
Configuration Code:2 (TO92UA/TO92UT
inline, not spread)
Packaging Code:
A (Ammopack)
Quantity Code:
2
Packing Unit / Minimum Order Quantity:
One Ammopack with 2000 pcs.
Example:
HAL1820UA-A-2-A-2-00
Bulk Inline
not spread
Configuration Code:2 (TO92UA / TO92UT,
inline)
Packaging Code:
B (Bulk)
Quantity Code:
1
Packing Unit: Two Bags with 1000 pcs. each
Minimum Order Quantity: 2000 pcs.
Example:
HAL1820UA-A-2-B-1-00
Micronas
Sept. 10, 2015; GL000002_005EN
25
Ordering Codes, Packaging, Handling
Marking of TO92UA:
Line 1: Product Name / Temperature Range
Line 2: Date Code / Option 1 (optional)
Bottom Side: Trace Code (optional)
Marking of TO92UT
Line 1: Product Name / Temperature Range
Line 2: Date Code / Option 1 (optional)
Line 3: Trace Code (optional)
Packaging in Bulk:
The sensors in the package TO92UA or TO92UT are delivered with Quantity Code “1”.
They are shipped in a cardboard box containing 2000 pieces bulk (2 bags with
1000 sensors each). The cardboard box has two labels; each bag is individually
labelled.
All sensors in the package TO92UA or TO92UT with straight legs are available in this
packaging variant.
The appropriate order codes are:
HALxxxxUA-x-2-B-1-00 for sensors TO92UA with straight legs (inline, not spread)
HALxxxxJQ-x-2-B-1-00 for sensors TO92UA with straight legs (inline, not spread)
HALxxxxUT-x-2-B-1-00 for sensors TO92UT-1 with straight legs (inline, not spread)
Micronas
Sept. 10, 2015; GL000002_005EN
26
Ordering Codes, Packaging, Handling
Fig. 3–17: TO92UA/UT bulk cardboard box inner view
Fig. 3–18: TO92UA/UT bulk cardboard box closed
Dimensions in mm
Length
350
Micronas
Cardboard Box
Width
120
Height
40
Sept. 10, 2015; GL000002_005EN
27
Ordering Codes, Packaging, Handling
Packaging in Ammopack:
For packages TO92UA and TO92UT the sensors are delivered with Quantity Code “2”.
They are shipped in a cardboard box containing 2000 pieces in carrier tape (Ammopack: folded tape without additional packaging). The cardboard box has two labels.
All sensors in the package TO92UA and TO92UT with straight or spread legs are available in this packaging variant.
The appropriate order codes are
HALxxxxUA-x-2-A-2-00 for sensors TO92UA with straight legs (inline, not spread)
HALxxxxUA-x-1-A-2-00 for sensors TO92UA with spread legs
HALxxxxUT-x-2-A-2-00 for sensors TO92UT with straight legs (inline, not spread)
HALxxxxUT-x-1-A-2-00 for sensors TO92UT with spread legs
Fig. 3–19: TO92UA/UT Ammopack cardboard box inner view
Micronas
Sept. 10, 2015; GL000002_005EN
28
Ordering Codes, Packaging, Handling
Fig. 3–20: TO92UA/UT Ammopack cardboard box closed
Dimensions in mm TO92UA, TO92UT
Length
350
Micronas
Cardboard Box
Width
120
Height
40
Sept. 10, 2015; GL000002_005EN
29
Ordering Codes, Packaging, Handling
3.9.
Package TO92UP
The sensors in the package TO92UP are delivered with Quantity Code “2”. They are
shipped in a cardboard box containing 2000 pieces in carrier tape (Ammopack: folded
tape without additional packaging). The cardboard box has two labels.
Possible Form of Delivery:
Ammopack Inline
not spread
Configuration Code:2 (TO92UP, inline, not
spread)
Packaging Code:
A (Ammopack)
Quantity Code:
2 (2000/2000)
Example:
HAL3625UP-A-2-A-2-00
Marking:
Line 1: Product Name / Temperature Range
Line 2: Date Code / Option 1 (optional)
Line 3: Lotnumber
Line 4: Trace Code
Packaging:
All sensors in the package TO92UP with straight legs are available in this packaging
variant.
The appropriate order code is:
HAL xxxUP-x-2-A-2-00 for sensors with straight legs (inline, not spread)
Micronas
Sept. 10, 2015; GL000002_005EN
30
Ordering Codes, Packaging, Handling
2nd Label
Fig. 3–21: TO92UP Ammopack cardboard box inner view
Fig. 3–22: TO92UP Ammopack cardboard box closed
Dimensions in mm TO92UP
Length
350
Micronas
Cardboard Box
Width
120
Height
45
Sept. 10, 2015; GL000002_005EN
31
Ordering Codes, Packaging, Handling
3.10.
Package TSSOP14
The sensors in the package TSSOP14 are delivered with Quantity Code “9”. They are
shipped in a cardboard box containing 8000 pieces (2 reels with 4000 sensors each, in
dry pack).
The cardboard box has two labels; each reel is individually labelled.
Possible Form of Delivery:
Carrier Tape 12 mm
Reel Diameter 330 mm
Configuration Code:4 SMD (TSSOP14)
Packaging Code:
R (Reel)
Quantity Code:
9
Packing Unit: Two reels with 4000 pcs. each
Minimum Order Quantity: 8000
Example:
HAR2425GP-A-4-R-9-00
Marking:
Line 1: Product Name / Temperature Range
Line 2: Lotnumber
Line 3: Datecode / Option 1 (optional)
Micronas
Sept. 10, 2015; GL000002_005EN
32
Ordering Codes, Packaging, Handling
Packaging:
All sensors in the package TSSOP14 are available in this packaging variant.
The appropriate order code is HARxxxxGP-x-4-R-9-00.
Fig. 3–23: TSSOP14 reel
Micronas
Sept. 10, 2015; GL000002_005EN
33
Ordering Codes, Packaging, Handling
Fig. 3–24: TSSOP14 reel in Dry Pack
Fig. 3–25: TSSOP14 cardboard box including two reels
Dimensions in mm
Length
395
Micronas
Cardboard Box
Width
395
Height
120
Sept. 10, 2015; GL000002_005EN
Reel
Diameter
330
34
Ordering Codes, Packaging, Handling
3.11.
Package PQFN40-2 (6 x 8 mm)
The controllers in the package PQFN40-2 are shipped in a cardboard box containing
3840 pcs. (10 trays with 384 pcs. each and one cover tray) in Dry Pack.
Possible Form of Delivery:
Tray
315 x 135.9 mm
Configuration Code:4 SMD (PQFN40-2)
Packaging Code:
T (Tray)
Quantity:
3840 (10 Trays x 384 pcs.)
Example:
HVC2480B-DV-B2-2954T
Marking:
Line 1: Product Name
Line 2: Lotnumber
Line 3: Internal Code / Datecode / Internal Code
Packaging:
See “Package PQFN40-4 (6 x 6 mm)” on page 36. The outer packaging of JEDECtrays is identical at Micronas.
The appropriate order code is HVC2480B-DV-xy-----T
Micronas
Sept. 10, 2015; GL000002_005EN
35
Ordering Codes, Packaging, Handling
3.12.
Package PQFN40-4 (6 x 6 mm)
The Controllers in the package PQFN40-4 are shipped in a cardboard box containing
4900 pcs. (10 trays with 490pcs. each and one cover tray), in Dry Pack.
Possible Form of Delivery:
Tray
315 x 135.9 mm
Packaging Code:
T (Tray)
Quantity Code:
4900
(10 x 4900)
Example:
HVC4223F-DL-xy-----T
Marking:
Line 1: Product Name
Line 2: ES (Engineering Samples / optional)
Line 3: Lotnumber
Line 4: Date Code / Internal Code
Packaging:
All controllers in the package QFN40 are available in this packaging variant.
The appropriate order codes for QFN40-2 are HVC2480B-DV-xy-----T and the appropriate order codes for QFN40-4 are HVC2480B-DL-xy-----T
Micronas
Sept. 10, 2015; GL000002_005EN
36
Ordering Codes, Packaging, Handling
Fig. 3–26: QFN40 trays fixed with 4 bands
Fig. 3–27: QFN40 cardboard box inner view
Micronas
Sept. 10, 2015; GL000002_005EN
37
Ordering Codes, Packaging, Handling
Fig. 3–28: QFN40 cardboard box closed
Dimensions in mm
Length
400
Micronas
Cardboard Box
Width
180
Height
100
Sept. 10, 2015; GL000002_005EN
38
Ordering Codes, Packaging, Handling
4. Document History
1. Hall Sensors: Ordering Codes, October 24, 1997, 6200-249-1E. First release.
2. Hall Sensors: Ordering Codes, Packaging, Handling, Sept. 12, 2001, 6200-249-2E.
Second release.
3. Hall Sensors: Ordering Codes, Packaging, Handling, May 26, 2004, 6200-249-3E.
Third release.
4. Hall Sensors: Ordering Codes, Packaging, Handling, Aug. 13, 2007,
GL000002_002EN. Fourth release.
5. Hall Sensors: Ordering Codes, Packaging, Handling, Nov. 9, 2007,
GL000002_003EN. Fifth release.
6. Hall Sensors: Ordering Codes, Packaging, Handling, May 22, 2013,
GL000002_004EN. Sixth release.
7. Ordering Codes, Packaging, Handling, Sept. 10, 2015, GL000002_005EN. Seventh
release, controllers included
Micronas GmbH
Hans-Bunte-Strasse 19  D-79108 Freiburg  P.O. Box 840  D-79008 Freiburg, Germany
Tel. +49-761-517-0  Fax +49-761-517-2174  E-mail: [email protected]  Internet: www.micronas.com
39
Sept. 10, 2015; GL000002_005EN
Micronas