AP725 20W TO-263 Power Resistor • Power Dissipation 20 watts with h/s • Low inductance • D2PAK housing • Electrically isolated from backplate • TCR Options ±100 ppm/°C • RoHS Compliant Characteristics Tolerance (Code): ± 1% (F), ± 5% (J) Value range: R02 to 130K (with standard resistance values) Power rating: 20W at 25˚C case temperature Temperature coefficient: ±100ppm/˚C Thermal resistance: 6.5˚C/W Inductance: 0.1µH maximum Operating voltage: √P*R with a maximum of 250V Dielectric strength: 2kVac Insulation resistance: 10GΩ Operating temperature: -55˚C to 155˚C PWR263S-20 Series Power Resistor Re Product Dimensions 10.1 (0.398) 7.8 (0.307) 48 ° Electrical Specifications 4.5 (0.177) 1.6 (0.063) 1.3 (.051) 10.4 (0.409) REF. 1 (0 15.39 (0.606) 8.8 (0.347) Parameter Specification Short term overload (2x Pr for R < 2Ω, 1.6 x Pr for R ≥ 2Ω, V < 1.5x operating voltage) ∆R ±0.25% Load life ( 1000 hours at rated power) Thermal shock (-55˚C to 155˚C, 5 cycles) 1.4 (0.055) 5.08 (0.20) ∆R ±1.0% 1.92 (0.076) ∆R ±0.5% Resistance to soldering heat (10 sec at 270˚C) ∆R ±0.5% Vibration (20 G 10 - 2000Hz .06” D.A) ∆R ±0.25% Moisture sensitivity level 1 3.1 (0.122) 0.25 (0.010) MM (INCHES) ±0.38 TOLERANCE: UNLESS OTHERWISE NOTED (±0.015) DIMENSIONS: LEAD 0.102 MAX AT MOUNTING COPLANARITY: (0.004) SURFACE 275 <1> Maximum of 20 seconds between 260 °C peak +245 °C and +260 °C Power dissipation is 2.8W at an ambient temperature of 25°C <1> 245 °C 225 when mounted on a double sided copper using FR4, 70μm of H 220 °C Temperature (°C) copper 39x30x1.6mm RESIS CODE MANU TRAD Soldering Profile Soldering Profile Ty 190 °C 175 60 - 90 seconds Ramp Down 6 °C/second 150 °C 125 Mod P Pack 2 60 - 120 seconds 10 seconds minimum Pin S S 75 Ramp Up 3 °C/second maximum 25 0 50 100 Pow 2 150 Time (seconds) 200 250 300 Power dissipation is 2.8 W at an ambient temperature of 25 ˚C when mounted on a double-sided copper board using FR4 standard, 70 µm of copper, 39 x 30 x 1.6 mm. Resi < ≥ Abso J F Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. For more information and ordering, please consult www.arcolresistors.com Page 1 of 2 2/14.05 Pack E B AP725 20W TO-263 Power Resistor PWR263S-20 Series Power Resistor PWR263S-20 Series Power Resistor Dimensions (mm ± 0.38) Recommended Padpad Layout layout Recommended Product Dimensions Product Dimensions 10.1 (0.398) 7.8 (0.307) 1.6 10.1 (0.398) (0.063) 7.8 (0.307) 48 ° 10.4 (0.409) REF. 8.8 (0.347) 11.0 (.433) 1.3 4.5 (.051) (0.177) 1.6 (0.063) 10.4 (0.409) REF. 48 ° Recommended Pad Layout 4.5 (0.177) 1.3 (.051) 15.39 (0.606) 4.02 (0.158) 15.39 (0.606) 4.02 (0.158) 10.52 (0.414) 10.52 (0.414) 2.25 (0.089) 8.8 (0.347) 2.25 (0.089) 4.23 (0.166) 1.92 (0.076) 1.4 (0.055) 20 Series Power Resistor 5.08 5.08 (0.20) 1.4 (0.055) 0.25 (0.010) (0.20) 3.1 (0.122) (0.076) 0.25 (0.010) 275 +245 °C and +260 °C 260 °C peak <1> Maximum of 20 seconds <1> between 245 °C <1> 245 °C 220 °C 225 125 Temperature (°C) 190 °C 60 - 90 seconds Ramp Down 6 °C/second 25 25 50 6 °C/second (.315) Ramp Up MODEL NUMBER MODEL NUMBER TOLERANCE 263 20 DATE CODE XXXX X% COUNTRY OF ORIGIN YYY COSTA R ICA TOLERANCE DATE CODE COUNTRY OF ORIGIN How to Order 0 How PWR 100 263 S 115 -to20Order - 130 10R0 F 145E 85 155 RESISTANCE CODE Resistor Model PWR = Power Resistor Package 263 = D2PAK 60 - 120 seconds LEAD MAX AT MOUNTING 30.102 °C/second maximum COPLANARITY: (0.004) SURFACE 263 20 RESISTANCE XXXX CODE X% YYY COSTA R ICA MANUFACTURER'S TRADEMARK Backplate Temperature 263 S - 20 - 10R0 F E 2.4 Ambient TemperaturePWR (°C) Model (0.095) °C PWR = Power Ramp Down 8.0 60 - 120 seconds MM DIMENSIONS:10 seconds minimum (INCHES) Typical 10 seconds minimum ±0.38 Ramp TOLERANCE: Up UNLESS OTHERWISE NOTED 75 3 °C/second maximum(±0.015) 75 Marking Typical Part Marking 0.26 (0.10) 20 4.23 (0.166) 220 °C 3.1 (0.122) 0.25 (0.010) 150 °C 125 60 - 90 seconds 190 °C 1.92 (0.076) 175 8.0 (.315) 60 260 °C peak 40 +245 °C and +260 °C 225 150 °C1.4 (0.055) 2.25 (0.089) 80 % Soldering Profile 8.8 <1> Maximum of 20 seconds between (0.347) 175 MANUFACTURER'S TRADEMARK 100 10.52 (0.414) 15.39 (0.606) Power Rated % 275 10.4 Profi(0.409) le REF. Power Rated Soldering 2.4 (0.095) Derating Curve 4.5 (0.177) 1.6 (0.063) 0.26 (0.10) 2.4 (0.095) 8.0 (.315) DIMENSIONS: 0.1 398) 7.8 307) 0.26 (0.10) 4.23 (0.166) MM Recommended Pad Layout (INCHES) Typical Part MM DIMENSIONS: ±0.38 (INCHES) 11.0 TOLERANCE: UNLESS OTHERWISE NOTED (±0.015) (.433) ±0.38 1.3 TOLERANCE: UNLESS OTHERWISE NOTED RESISTANCE LEAD 0.102 MAX AT MOUNTING (±0.015) (.051) CODE 4.02 COPLANARITY: (0.004) SURFACE LEAD 0.102(0.158) MAX AT MOUNTING COPLANARITY: (0.004) SURFACE ns Temperature (°C) 3.1 (0.122) 1.92 11.0 (.433) Package 2 Pin Style Part MarkingS = Surface Mount 263 = D PAK Ordering Procedure Pin Style Power S = Surface Mount 20 = 20 W Standard Resistor: Series, Resistance Value, Tolerance, Power MODEL Resistance Value 20 = 20- W NUMBER Packaging T&R - TR or Tubes blank 263options 20 <100 ohms ... “R” represents decimal TOLERANCEResistance Value XXXX X% point (examples: 7R50 = 25 DATE CODE YYY MANUFACTURER'S ... “R” represents decimal 0 50 150 200 250 300 7.5 Ω; <100 R500 ohms = 0.5 Ω) TRADEMARK e.g. AP725 COSTA8R2 R ICAJ TR COUNTRY / AP725 2R F digits are point (examples: 7R50 = Time (seconds) ≥100 ohms First three OF .... ORIGIN wer dissipation is 2.8 W at an ambient temperature of 25 ˚C when mounted on a significant, fourth digit7.5 Ω; R500 = 0.5 Ω) ≥100number ohms....ofFirst three digits are uble-sided copper board using FR4 standard, 70 µm of copper, 39 x 30 x 1.6 mm. represents 0 seconds between Power dissipation is 2.8 W at an ambient temperature of 25 ˚C when mounted on a significant, fourth digit 260 °C peak zeros to follow (exam260 °C double-sided copper board using FR4 standard, 70 µm of copper, 39 x 30 x 1.6 mm. represents number of <1> 245 °C ples: 2000 = 200 ohms; 3002 = 30K ohms) zeros to follow (examples: 2000 = 200 ohms; Absolute Tolerance 220 °C 3002 = 30K ohms) How to Order J=5% Absolute Tolerance 190 °C 60 - 90 F = 1 % PWR 263 S - 20 - 10R0 F EJ = 5 % seconds Packaging F=1% Ramp Down Model E = Tape & Reel 6 °C/second Packaging PWR = Power cifications are subject to change without notice. Blank = Tubes E = Tape & Reel Resistor tomers should verify actual device performance in their specific applications. Specifications are subject to change without notice. Blank = Tubes Package 60 - 120 seconds Customers should verify actual device performance in their specific applications. 2 263 = D PAK 0 50 100 150 Time (seconds) 100 200 10 seconds minimum Ind. Estate, Power contract and is subject to change without notice. ARCOL 20 = 20 W operate a policy of continual product development, therefore, Truro, Cornwall, TR4 9LG, UK. T +44 (0) 1872 277431 100 F +44 150 200 (0)Time 1872 222002 (seconds) 300 Pin Style The information contained herein does not form part of a S = Surface Mount ARCOL UK Limited, Ramp Up Threemilestone 3 °C/second maximum 250 250 E sales arcolresistors.com 300 8 W at an ambient@temperature of 25 ˚C when mounted on a oard using FR4 standard, 70 µm of copper, 39 x 30 x 1.6 mm. www.arcolresistors.com Resistance Value may change. <100 specifications ohms ... “R” represents decimal point (examples: 7R50 = 7.5 Ω; R500 = 0.5 Ω) is the responsibility ≥100 It ohms .... First three digits of arethe customer to ensure that the signifiselected cant, fourth digitour range is suitable for the intended component from represents number of application. doubt please ask ARCOL. zerosIftoinfollow (examples: 2000 = 200 ohms; 3002 = 30K ohms) Page 2 of 2 Absolute Tolerance J=5% F=1% 2/14.05