Mounting Hardware For 200, 210, 270 and 280 Series T h r u - B o lt s a n d M o u n t i n g B r a c k e t s Sturdy plated steel brackets, along with thru-bolts, centering washers and insulating washers (included), allow for secure mounting of 210 type and 270 type resistors. Mounting brackets are available in either slotted (one with end-slot/one with side-slot) or elongated styles. E TypeDimensions Slotted A B C D E 6101—E 0.781" — 0.75" 0.031" 0.438" 6104—E 0.781" — 0.75" 0.031" 0.438" 6110—E 1" — 1.125" 0.063" 0.813" F 0.25" 0.25" 0.313" G — — — H — — — Elongated 6120—E 1" 6126—E 1.5" 6127—E 1.5" 6128—E 1.5" 6129—E 1.5" 0.219" 0.281" 0.281" 0.281" 0.281" .438 .563 .563 .563 .563 .750 .875 .875 .875 .875 — — 2" 2" 2" 0.5" 1.25" 1.25" 1.25" 1.25" 0.422" 0.438" 0.438" 0.438" 0.438" 13/4" 2" 21/4" 4" 6" 61/2" 81/2" 101/2 21/4" 21/2" 23/4" 43/4" 65/8" 7" 91/8" 111/8 Resistor length plus .125" (3.175 mm) H E E 0.031" 0.063" 0.063" 0.063" 0.063" Std. Core Bolt Length Length Slotted type Elongated type F F C .063" 1.588 mm C G D mica washer centering washer B A D mica washer centering washer A o r d e r i n g i n f O r m at i o n Slotted Euro lug RoHS Compliant 6 1 0 4 - E M - 6 1/2 -E 1 Bracket 6101 6102 6103 6104 6105 6106 6110A 6111A 6112A 6110 6111 6112 6113B 6114 Core Code K M N P R S Std. Core Length in. mm 2 4 6 119 2 119 4 119 61/2 170 4 170 6 170 81/2 101/2 81/2 101/2 113/4 12 15 20 Euro lug No. of Resistors 1 2 3 1 2 3 1 2 3 1 2 3 1 252 252 252 375 Elongated RoHS Compliant 6 1 2 1 - D - 13/4 -E No. of Resistors 1 2 1 2 3 4 1 2 3 4 Bracket 6120 6121 6122 6123 6124 6125 6126 6127 6128 6129 Core Code D H K M N P Standard Core Length (in) 1 13/4 2 21/4 4 2 4 61/2 81/2 101/2 More detailed information at http://www.ohmite.com/techdata/lug-mounting.php = Most popular Standard values = Standard values = Non-Standard values subject to minimum handling charge per item 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected] (continued) 117 Mounting Hardware For 200, 210, 270 and 280 Series Mounting Brackets T h r u B o lt s Brackets fit inside cores of 200, 210 and 270 type resistors and remain in place by spring tension. Standard brackets are plated steel and have no suffix to part number. Spring steel brackets are indicated with an “S” suffix following part number. Thru-Bolts, with centering washers and mica insulating washers, permit perpendicular mounting of 200, 210 and 270 type resistors to panels up to 0.25" thick. Part number Standard Spring steel 5E 5SE 7E 7SE 9E 9SE 12E 12SE 18E 18SE Mtg screw size (max.) 6 6 6 10 10 For resistors (power ratings) 8, 12 watt 20 watt 25, 50, 75 watt 100 watt 175, 225 watt Bolt size Length No. 1.75" 8 2.5" 8 2.75" 8 2.75" 10 4.75" 10 6.75" 10 7.313" 10 9.5" 0.25" 11.5" 0.25" For resistors (power rating) 8 watt 12 watt 20 watt 25 watt 50 watt 75 watt 100 watt 175 watt 225 watt AD J US T A B LE LUGS Washers Metal Centering Part No. 6000E 6001E 6003E Part No. 7PA5E 7PA10E 7PA20E 7PA25E 7PA50E 7PA75E 7PA100E 7PA160E 7PA200E FOR 210 SERIES DiameterFor max. Outer Innerscrew size 0.563" 0.313 #10 0.75" 0.5 #10 1.125" 0.75 0.25" For resistors (power ratings) 25, 50, 75 watt 100 watt 175, 225 watt Mica insulating Diameter For resistors Part No. Outer Inner (power ratings) 6010E 0.75" 0.625" 25, 50, 75 watt 6011E* 0.75" 0.313" 25, 50, 75 watt 6012E 1" 0.625" 100 watt 6013E* 1" 0.5" 100 watt 6014E 1.25" 0.625"core 1" O.D. x 0.625" I.D. 6015E* 1.25" 0.625"core 1" O.D. x 0.625" I.D. 6016E 1.5" 0.625" 175, 225 watt 6017E* 1.5" 0.75" 175, 225 watt * Use with centering washers. One standard screwdriver type adjustable lug is supplied with each unit. Two types of lugs can be ordered separately: standard or with a silver contact button; both types are available with a screwdriver type lug. Resistor core diam.Standard part numbers (O.D., in. / mm) Standard Silver 0.313 / 7.94 2115E 2116E 0.563 / 14.3 2121E 2123E 0.750 / 19.05 2125E 2127E 1.125 / 28.58 2133E 2135E Double thumb screw Lug (Part Number 2160E) The double thumb screw adjustable lug permits easier adjustment and less chance of damage to resistance wire. Available for 1.125" cores only. More detailed information at http://www.ohmite.com/techdata/lug-mounting.php = Most popular Standard values = Standard values = Non-Standard values subject to minimum handling charge per item 118 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected]