MAL-6001X-X08 Unity Opto Technology Co., Ltd. Description Features The LED Strip signage light module is comprised of a linear l LED-based solid state lighting module array of solid state light emitting diodes ( LEDs ) mounted l Long operation life and low power requirement on an elongated printed circuit board. This board is encased l High reliability in wide operating temp. inside a translucent plastic hosing, which is sealed at its two l Wide viewing angle and uniform appearance ends.The LED Strip unit has interconnects at each end, which l Easy modular interconnectivity allows for easy modular interconnectivity, either to a power l High luminous intensity source or an adjacent LED Strip unit. Applications A series of these LED Strip units can be mounted end-to-end l Focused Reading & Task Lighting along the roof or edge of a building to produce a bright, l Uninterrupted Emergency Lighting continuous contour of light, similar to neon, but consuming l Concealed Accent Lighting only a fraction of the power that neon consumes. l Edge Lighting LED Strip is made with an advanced optical grade high Options strength acrylic lens, which offers superior high temperature l and moisture resistance performance in outdoor environments. Available with Low Voltage Disconnect Battery Protection Circuit The high strength acrylic extrusion lens material is tough and l Special Operating Voltages impact resistant. In addition, the high strength arcylic lens l Choice of Narrow (15oC) , Medium (30oC) or is doped with UV-a and UV-b inhibitors to reduce the effects Wide Angle (120oC) LEDs of long-term exposure to direct sunlight. LED Strip is available in a variety of colors：red, yellow, orange, green, and blue. It is easily installed on any surface with minimal surface penetration and is built to withstand the harshest environments. The LEDStrip is made in custom lengths to order, and all fittings can be nearly concealed. Thus, each installation is customized for a location. 1/4 12/27/2002 MAL-6001X-X08 Unity Opto Technology Co., Ltd. Package Dimensions 2/4 12/27/2002 MAL-6001X-X08 Unity Opto Technology Co., Ltd. Mechanical Characteristics Outside Diameter Typical Units Semicircular 26.0 mm Typical Units Red-Orange-Yellow 12 V (AC) Blue-Green 24 V (AC) Red-Orange-Yellow 1.20 A / 8feet Blue-Green 0.88 A / 8feet Red, Yellow, Orange 14.40 W / 8feet Blue, Green 21.12 W / 8feet 920 g / 8feet Electrical Characteristics Parameter Voltage Current Power Dissipation (Pd) Weight Temperature Ratings Storage Temperature Power Supply -20oC to + 85oC All other components -40 C to + 100 C o o Operating Temperature 3/4 o o Power Supply -10 C to + 60 C All other components -40oC to + 85oC 12/27/2002 MAL-6001X-X08 Unity Opto Technology Co., Ltd. Optical Characteristics Dominant Wavelength (λ dom) Typical Units Red 625 nm Yellow 592 nm Orange 605 nm Green 525 nm Blue 470 nm Luminous (L) Typical Units Red 180 cd/m2 Yellow 220 cd/m2 Orange 180 cd/m2 Green 160 cd/m2 Blue 130 cd/m2 Note : 1.Test device : SPECTRASCAN (made by POTO RESEARCH PR-650) 2.Test condition : Test 60cm light bar by photometer and record the intensity per 3cm. Selection Guide Part Number Color Unit MAL-6001R-R08 Red feet MAL-6001Y-Y08 Yellos feet MAL-6001E-E08 Orange feet MAL-6001G-G08 Green feet MAL-6001B-B08 Blue feet Note： MAL-6001X-X08 ( 08 → eight feet) LED Color Tube Color 4/4 12/27/2002