RWS Precision Power Wirewound SMD Resistor A compact and precision power resistor, manufactured to the highest standards; reliable and robust but still achieving drift of less than 1% and TCR of 10-90ppm/˚C when under rated conditions • High overload capability for surge and pulse applications • Low inductance available • Custom specification available • RoHS Compliant Electrical Specifications Type Wattage Tolerance Resistance Range Resistance Range - Non-inductive Min Max Min Max RWS05 0.5 R005 1K R1 200R RWS1 1 R005 5K8 R1 1K2 RWS2 2 R005 14K R1 2K8 RWS3 3 R01 25K R1 5K RWS5 5 R05 50K R1 10K D (0.5%) F (1%) J (5%) Characteristics Tolerance (Code): ± 0.5% (D),± 1% (F), ± 5% (J) Operating temperature: -55°C to +155°C Temperature coefficient: ± 90ppm/°C R1 - R99, ± 50ppm/°C 1R - 10R, ± 20ppm/°C > 10R Max. working voltage: (PxR) 1/2 5 times rated wattage for 5 seconds Short time overload ±(0.5% + 0.05mΩ)∆R Solderability Bath temperature 235±5˚C, immersion time 2±0.5 seconds JIS C 5201 4.17 >95% of contact face covered new solder Resistance to solder heat Bath temperature 260±5˚C, immersion time 10±1 seconds JIS C 5201 4.18 ±(0.5% + 0.05mΩ)∆R Dielectric withstanding voltage Test voltage >500V, duration 1 minute JIS C 5201 4.7 Load life 70˚C ±2˚C, rated DC working voltage applied 1.5 hours on and 0.5 hours off, 1000 hours, ±(2.0% + 0.05mΩ)∆R ARCOL UK Limited, The information contained herein does not form part of Threemilestone Ind. Estate, a contract and is subject to change without notice. Arcol Truro, Cornwall, TR4 9LG, UK. operate a policy of continual product development, therefore, T +44 (0) 1872 277431 specifications may change. F +44 (0) 1872 222002 It is the responsibility of the customer to ensure that the E [email protected] www.arcolresistors.com component selected from our range is suitable for the intended application. If in doubt please ask Arcol. For more information and ordering, please consult www.arcolresistors.com Page 1 of 2 1 / 11.46 RWS SMD Precision Power Wirewound Resistor Temperature Rise 80 RWS-5 RWS-3 RWS-2 125 100 Rated Power (%) Temperature (°C) 100 RWS-1 RWS-05 125 Derating Curve 60 40 80 60 40 20 20 0 0 -55 75 0 0 1/2W 1W 2W 3W 100 125 150 175 Temperature (°C) 5W Power (Watt) Dimensions (in mm ±0.5) DIMENSIONS Type L1 L2 L3 H1 W2 RWS05 5.08 1.28 2.52 3.25 1.663 RWS1 7.50 1.75 4.00 4.64 2.405 RWS2 11.00 2.00 7.00 4.65 3.59 RWS3 13.50 2.50 8.50 5.65 4.20 RWS5 20.30 3.00 Model 12.30 7.87 4.90 Solder Pad Dimensions RWIS2010 RWS1 RWIS3014 W3 RWIS4318 1.98 RWIS5322 2.16 2.45 RWIS8030 2.95 RWS2 2.75 3.70 RWS3 3.20 4.20 RWS5 3.70 5.10 Type RWS05 L4 Dimensions inches / millimeters +-inches Solder Pad Dimensions L1 ±0.020 L2 ±0.020 L3 ±0.020 H1 ±0.020 W1 ±0.020 W2 ±0.020 L4 ±0.020 W3 ±0.020 0.200/05.08 0.300/07.50 0.430/11.00 0.530/13.50 0.800/20.30 0.050/1.28 0.069/1.75 0.079/2.00 0.098/2.50 0.118/3.00 0.099/2.52 0.157/4.00 0.216/7.00 0.256/8.50 0.484/12.3 0.128/3.25 0.183/4.64 0.189/4.65 0.229/5.65 0.310/7.87 0.100/2.54 0.138/3.50 0.177/4.50 0.217/5.50 0.300/7.62 0.065/1.663 0.095/2.405 0.134/3.590 0.165/4.200 0.193/4.900 0.078/1.98 0.096/2.45 0.108/2.75 0.126/3.20 0.146/3.70 0.085/2.16 0.116/2.95 0.146/3.70 0.165/4.20 0.200/5.10 TEMPERATURE RISE ( In ⁰C ) DERATING ( Rated Power In % ) Ordering Procedure Standard Resistor: Series, Resistance Value, Tolerance, Packaging (T&R or Bulk) e.g. RWS1 / NRWS1 (non-inductive) R005 F T&R ARCOL UK Limited, Threemilestone Ind. Estate, Truro, Cornwall, TR4 9LG, UK. The information contained herein does not form part of PERFORMANCE CHARACTERISTICS Parameter Thermo Shock T +44 (0) 1872 277431 F +44 (0) 1872 222002 E [email protected] Short Time Overload Solderability www.arcolresistors.com a contract and is subject to change without notice. Arcol Conditions Of Test Test Results operate a policy of continual development, -55⁰C +0⁰C,-3⁰C to 150⁰Cproduct +3⁰C,-0⁰C, 100 cycles, therefore, ±(1.0% + 0.5mΩ)△R Minimummay 15 minute at each extremes specifications change. Overload voltage : 5 Times rated wattage for 5 ±(0.5% + 0.5mΩ)△R seconds It is the responsibility of the customer to ensure that the Bath Temperature 235±5℃, Immersion Time of contact face component selected from our range is suitable for the >95% intended 2±0.5seconds JIS C 5201 4.17 covered new solder application. If in doubt please ask Arcol. Resistance To Solder Heat Page 2 of 2 Dielectric Withstanding Voltage Bath Temperature 260±5℃, Immersion Time 10±1 seconds JIS C 5201 4.18 Magnitude of test voltage : > 500 volts. Duration 1 minute JIS C 5201 4.7 ±(0.5% + 0.5mΩ)△R Pass 1 / 11.46