ARCOL ARC3 Series

ARC3 High Voltage Precision Resistors
Designed for applications such as voltage dividers,
medical and measuring equipment, electrostatic and
current limiting devices where high stability, low TCR
and high ohmic values are required.
• Non Inductive, Thick Film
• High Voltage to 96 kVdc
• Low TCR
• Tolerance as low as ± 0.1%
• RoHS Compliant
Characteristics
Operating temperature:
-55°C to +225°C
Tolerance (Code):
± 0.1% (B), ± 0.25% (C), ± 0.5% (D), ± 1% (F), ± 2% (G), ± 5% (J), ± 10% (K)
Temperature Coefficient (Code):
± 15ppm/°C (A), ± 25ppm/°C (E), ± 50ppm/°C (F), ± 100ppm/°C (S), ± 200ppm/°C (L)
TCR stated is measure at +25˚C and +85˚C. For TCR outside this range, please contact ARCOL
Insulation resistance:
> 10,000Mohm
500 Volts @ 25°C, 75% relative humidity
Dielectric strength:
> 1000 Volt
25°C, 75% relative humidity
Thermal shock:
R/R 0.25% max
Overload:
R/R 0.25% max
Moisture resistance:
R/R 0.25% max
Load life:
R/R 0.5% max
1.5 x Pnom, 5 sec (do not exceed 1.5 x V max)
1000 hours at rated load
These resistors are tailored for operation in air and not aggresive atmospheres. For special applications (i.e. oil, casting, moulding, etc)
please contact ARCOL.
Electrical Specifications
Electrical data
Type
P
Watt
40°C
Resistance range available at Tolerance / TCR
U
kV dc
± 0.1-10%
15 ppm/°C
± 0.1-10%
25 ppm/°C
± 0.5 - 10%
50 ppm/°C
± 0.5 - 10%
100 ppm/°C
± 2 - 10%
150 ppm/°C
± 2 - 10%
200 ppm/°C
ARC3-11
11
24
50K-500M
50K-500M
500R-1G
500R-1G
500R-5G
500R-5G
ARC3-23
23
48
100K-1G
100K-1G
700R-1G
700R-1G
700R-10G
700R-10G
ARC3-54
54
48
100K-1G
100K-1G
2R-1G
2R-1G
2R-10G
2R-10G
ARC3-71
71
64
100K-1G5
100K-1G5
20R-1G5
20R-1G5
20R-15G
20R-15G
ARC3-105
105
96
150K-2G
150K-2G
80R-2G
80R-2G
80R-25G
80R-25G
F +44 (0) 1872 222002
E [email protected]
For more information and ordering, please consult
www.arcolresistors.com
www.arcolresistors.com
Page 1 of 2
5/11-39
ARC3 High Voltage Precision Resistors
Ordering Procedure
Derating Curve
Standard Resistor To specify standard: Series, Termination
100
Percent Rated Power
Style, Coating Type, Ohmic Value, Tolerance Code and
Temperature Coefficient Code, e.g.: ARC3-23 20M D E
Tolerance (Code) ±0.1% (B), ±0.25% (C), ±0.5% (D), ±1% (F),
±2% (G), ±5% (J), ±10% (K)
Temperature Coefficient (Code) ±15ppm/°C (A), ±25ppm/°C
80
60
40
20
0
0
(E), ±50ppm/°C (F), ±100ppm/°C (S), ±200ppm/°C (L)
40
225
100
Temperature °C
Dimensions (mm)
G
L
C
D
B
Type
L
B
C
D
G
ARC3-11
81 ± 1
14.5 ± 0.2 13.5 ± 0.5 10.0 ± 0.2
M4
ARC3-23
156 ± 2
14.5 ± 0.2 13.5 ± 0.5 10.0 ± 0.2
M4
ARC3-54
160 ± 2
31.5 ± 0.2 30.5 ± 0.5 18.0 ± 0.2
M8
210 ± 2.5 31.5 ± 0.2 30.5 ± 0.5 18.0 ± 0.2
M8
ARC3-105 308 ± 3.5 31.5 ± 0.2 30.5 ± 0.5 18.0 ± 0.2
M8
ARC3-71
Page 2 of 2
5/11-39