TA Series Power Chip Thick Film on Alumina Substrate Ohmite’s original Power Chip resistors feature our thick film on alumina substrate technology. These planar packages yield space saving, 10W/in2 power densities that require over 50% less board space than other radial packages. Convection cooling is maximized by the planar package configuration which dissipates heat well above board level. Ohmite’s power chip resistors have a 125% higher operating temperature range than competitive product of similar design. High temperature solder and in-process plating keep terminations secure under self-heating effects by preventing re-flow from full power operation. Flexible packaging schemes make these resistors ideal for power supplies, audio amplifiers, video flyback, and other power control applications. F e at u r e s • High-Temp Terminal Construction • Wide Resistance Range • Low Inductance (50nH-100nH) • High Power Density • Easy to install. PC-mountable S ERIE S S P ECI F IC A T I O N S Series TA203 TA303 Wattage 3.0 3.0 Series TA205 TA305 TA605 TA805 Wattage 5.0 5.0 5.0 5.0 Series TA207 TA307 Wattage 7.5 7.5 Series TA310 TA810 Wattage 10.0 10.0 Series TA025 TA050 TA100 Wattage 25.0 50.0 100.0 c h a r a c t e r i st i c s Substrate Alumina Resistor Thick Film Coating Glass Terminals Solder Plated Phosphor Bronze 450 ppm/°C Temperature Coefficient 1 ohm: 1 to 100Ω: 100 ppm/°C 101Ω and up: 50 ppm/°C Tolerance ±1%, ±5% and ±10% Power Rating Based on 25°C free air Resistance Range 0.25 ohm to 10M ohm. Consult factory for other values Maximum Operating Voltage 350 VAC, 500 VDC through glass, 1000 VAC, 1500 VDC through substrate, not to exceed power rating Overload Five times rated power, as long as the one second average dissipation does not exceed the wattage rating. ∆R: ±2%, 2000 hours Test Condition Test MILR83401 Specification Life (Rated 40°C, rated power, 90 Power) min ON 30 min OFF, 1000 hrs. ΔR ±( 1.0% + 0.05Ω) Life 60°C, 90 - 95% RH, (Moisture rated power, 90 min Load) ON 30 min OFF, 1000 hrs. ΔR ±( 1.0% + 0.05Ω) Temperature Room temp > -55°C Cycling 30 min > RT 10 min ± 120°C 30 min > RT10 min 5 cycles ΔR ±( 0.25% + 0.05Ω) Flammability UL94V-O rated (not recognized) Soldering 350°C Solderpot, 3 Heat secs. Insulation DC 100V, 1 min Resistance ΔR ±( 0.25% + 0.05Ω) Over 1000M ohm Derating 100% @ 25°C to 0% @ 180°C ambient. Equivalent Parallel Capacitance 1.0pf (100 MHz) Withstanding Voltage 5000V thru back side Operating Temperature Range -55°C to +180°C (continued) Overload Current 20 x rated current up to 8 ms (ΔR ± 0.5%) 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected] 103 TA Series Power Chip Thick Film on Alumina Substrate DIMENSIONS (±.020 in. / ±.508mm) Series Wattage TA203PA PA 3, 5, 7.5 & 10 watt H typical PC board 0.07"/1.78mm 0.17"/4.32mm P L 0.10"/2.54mm 0.02" x 0.015" Pins PW 10, 25, 50 & 100 watt L+0.08"/2mm max. L 0.240" / 6.10 mm P 0.150" / 3.8 mm min. 0.040" / 1.02 mm typ. 0.200" / 5.08 mm TA303PA 3.0 0.300 / 7.62 0.50 / 12.70 0.60 / 15.24 TA205PA 5.0 0.200 / 5.08 0.50 / 12.70 1.00 / 25.40 TA305PA 5.0 0.300 / 7.62 0.50 / 12.70 1.00 / 25.40 TA605PA 5.0 0.600 / 15.24 1.00 / 25.40 0.50 / 12.70 TA805PA 5.0 0.800 / 20.32 1.00 / 25.40 0.50 / 12.70 TA207PA 7.5 0.200 / 5.08 0.75 / 19.05 1.00 / 25.40 TA307PA 7.5 0.300 / 7.62 0.75 / 19.05 1.00 / 25.40 TA025PA 25.0 1.90 / 48.3 2.220 / 56.39 1.170 / 29.70 TA025PY* 25.0 1.90 / 48.3 2.220 / 56.39 1.170 / 29.70 0.150" / 3.8 mm min. 0.300" / 7.62 mm 0.070" / 1.78 mm Height H TA810PA 10.0 0.800 / 20.32 1.00 / 25.40 1.00 / 25.40 TA810PW* 10.0 0.800 / 20.32 1.085 / 27.56 1.00 / 25.40 PY mount 0.020" / 0.51 mm typ. Length L TA310PA 10.0 0.300 / 7.62 1.00 / 25.40 1.00 / 25.40 TA310PW* 10.0 0.300 / 7.62 1.085 / 27.56 1.00 / 25.40 0.040" / 1.02 mm H P 3.0 0.200 / 5.08 0.50 / 12.70 0.60 / 15.24 0.855" / 21.72 mm TA050PA 50.0 1.90 / 48.3 2.220 / 56.39 2.270 / 57.60 TA050PY* 50.0 1.90 / 48.3 2.220 / 56.39 2.270 / 57.60 TA100PA 100.0 4.10 / 104.1 4.420 / 112.272.270 / 57.60 TA100PY* 100.0 4.10 / 104.1 4.420 / 112.272.270 / 57.60 *10-100 watts available in PW,PA, and PY packages. 0.195" / 4.95 mm 0.075" / 1.91 mm dia. finished pins O R D ERI N G I N F O R M A T I O N Pin spacing (on 3-10W models only) 2 = .2" 3 = .3" 8 = .8" Tolerance K = 10% J = 5% F = 1% RoHS compliant TA305PA4K50JE Series Power Rating: 03 = 3 W 05 = 5 07 = 7.5 10 = 10 025 = 25 050 = 50 100 = 100 Package: PA = pin terminals, std. for 3-10 W PW = wraparound, std. for 10-100 W PY = high-stability wraparound Resistance Value (Ω) R250 = 0.25 10R0 = 10.0 2K00 = 2,000 45K0 = 45,000 104 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected] TA100PW TA050PW TA025PW TA810PW 2 ,500.00 –––2K50J 3,000.00 –––3K00J 4,000.00 –––4K00J 4,700.00 –––4K70J 5,000.00 –––5K00J 5,100.00 –––5K10J 7,500.00 –––7K50J 10,000.00 –––10K0J 15,000.00 –––15K0J 18,000.00 –––18K0J 20,000.00 –––20K0J 30,000.00 –––30K0J 39,000.00 –––39K0J 50,000.00 –––50K0J 75,000.00 –––75K0J 100,000 –––100KJ 150,000 –––150KJ 200,000 –––200KJ TA310PA TA207PA TA205PA TA305PA TA303PA TA203PA Ohmic value TA100PW TA050PW TA025PW = Most popular standard values, = Stock values –––50R0J –––62R0J –––68R0J –––75R0J –––100RJ –––150RJ –––200RJ –––250RJ –––270RJ –––300RJ –––470RJ –––560 –––620RJ –––680RJ –––1K00J –––1K50J –––1K80J –––2K00J TA810PW 50.00 62.00 68.00 75.00 100.00 150.00 200.00 250.00 270.00 300.00 470.00 500.00 620.00 680.00 1,000.00 1,500.00 1,800.00 2,000.00 TA310PA TA207PA TA205PA Ohmic value TA305PA TA100PW TA303PA TA050PW TA203PA TA025PW TA810PW TA205PA TA305PA TA310PA TA303PA TA207PA TA203PA –––R250J –––1R00J –––1R50J –––2R00J –––4R70J –––5R00J –––5R10J –––7R50J –––8R20J –––10ROJ –––11R0J –––12R0J –––15R0J –––20R0J –––24R0J –––27R0J –––33R0J –––47R0J Part Number Part No. Prefix Suffix 0.25 1.00 1.50 2.00 4.70 5.00 5.10 7.50 8.20 10.00 11.00 12.00 15.00 20.00 24.00 27.00 33.00 47.00 Part Number Part No. Prefix Suffix Part Number Part No. Prefix Suffix Ohmic value Standard part numbers for TA series