M618x Series 3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO Product Features • Tight stability performance (±0.2 ppm) over Industrial Temperatures (-40 °C to +85 °C) (±0.1 ppm) over Commercial Temperatures (0 °C to 70 °C) • 3.0 V, 3.3 V and 5.0 V versions • Low phase noise performance • Tristate Function standard Product Description MtronPTI’s M618x Series TCXO’s and TCVCXO’s provide design engineers with low voltage, surface mount products with extremely tight stability (down to ±0.10 ppm) over temperature and time. Specially processed crystals enable the M618x to achieve consistent long-term stability and minimal frequency shift after reflow. The low phase noise (-155 dBc/ Hz at 100 kHz) makes the M618x ideal for the design engineer working on all types of systems as the reference timing source. Product Applications The M618x Series is ideally suited for a wide range of applications such as GPS, military, avionics, test and measurement, WLAN, WiMax base stations, point to point/multi-point radios, medical equipment, frequency synthesis, frequency translation and land mobile radio. Standard output for the M618x series is HCMOS compatible or clipped sine wave. The product is ideally suited for battery and remote applications where it draws as little as 1.5 mA of current with a 3.3 volt supply at 13 MHz. This low power consumption provides an advantage over similarly specified ovenized oscillators for power-sensitive applications. The M618x series offers ±10 ppm minimum pull range with excellent tuning linearity performance for critical PLL applications. This series is available in selective frequencies from 8 MHz to 52 MHz. Product Ordering Information M6180Sxxx, M6181Sxxx, M6182Sxxx - Contact factory for datasheets. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. Rev: 01/28/2013 M618x Series 3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO Performance Characteristics Parameter Electrical Specifications Frequency Range Operating Temperature Storage Temperature Frequency Tolerance @ +25 °C Frequency Stability Stability vs. Reflow Frequency vs. Supply Frequency vs. Load Aging (First Year) Aging (First Year) Aging (10 Year) Aging (10 Year) Supply Voltage Supply Current (Reference to VDD = 3.3 V) Output Logic Levels (HCMOS) Output Level (Clipped Sine Wave) Symmetry (Duty Cycle) Rise/Fall Time Output Load Symbol FO TA TSTG ∆F/F ∆FT/F Typ. Max. 8 52 (See Ordering Information) -55 +125 -1.0 +1.0 (See Ordering Information) -1.0 ∆FVDD/F ∆FLOAD/F VDD IDD VOL VOH VOUT VOUT tDC tR/tF +1.0 ±0.1 ±0.1 -1.0 +1.0 -2.0 +2.0 -3.0 +3.0 -5.0 +5.0 (See Ordering Information) ±0.02 ±0.02 2.0 3.0 5.5 1.3 1.7 2.8 3.0 4.0 6.5 1.9 2.3 3.5 20 80 1.0 0.8 40 50 Units MHz °C °C ppm ppm ppm ppm ppm ppm ppm ppm ppm V mA mA mA mA mA mA % VDD % VDD Vpk-pk Vpk-pk 60 6.5 % ns +10 2.7 3.0 4.5 +50 ppm V V V µA kΩ % 15 pF 10 kΩ || 10 pF Frequency Adjustment Control Voltage Range -10 0.3 0.3 0.5 -50 100 Input Leakage Current Input Resistance Linearity ModulationBandwidth Tristate Function 1.50 1.65 2.50 5 2 kHz 70 Tristate Leakage Current Phase Noise (Typical 12.8 MHz HCMOS @ 3.3 V) Environmental Min. 30 +100 -100 -101 -130 -149 -155 -156 % VDD % VDD µA dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Conditions/Notes For TCXO only (FMAX - FMIN)/2 For ±5% supply voltage variation For ±5% load variation F0 ≤ 20 MHz F0 > 20 MHz F0 ≤ 20 MHz (includes first year) F0 > 20 MHz (includes first year ±5% voltage tolerance HCMOS output at 13 MHz HCMOS output at 26 MHz HCMOS output at 52 MHz Clipped Sine Wave output at 13 MHz Clipped Sine Wave output at 26 MHz Clipped Sine Wave output at 52 MHz IOH/IOL = ±4 mA, VDD = +3.0 V IOH/IOL = ±4 mA, VDD = +3.0 V F0 ≤ 40 MHz F0 > 40 MHz Ref. to ½ VDD HCMOS Only Ref. 10% to 90% HCMOS only HCMOS Output Clipped Sine Wave Output Over Control Voltage Range For VDD = 3.0 V For VDD = 3.3 V For VDD = 5.0 V Output enabled. Logic “1” or “Open” Output disabled. Logic “0” or “GND” @ 10 Hz Offset @ 100 Hz Offset @ 1 kHz Offset @ 10 kHz Offset @ 100 kHz Offset Shock MIL-STD-202, Method 213, Condition C (100 g) Vibration MIL-STD-202, Methods 201 & 204 (10 g from 10 Hz to 2000 Hz) Solderability EIAJ-STD-002 Package 3.2 mm x 5.0 mm x 1.58 mm, SMT (RoHS Compliant) Max Soldering Conditions See solder profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 2 M618x Series 3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO Phase Noise Plot M618x 12.8 MHz Phase Noise Output Waveform (HCMOS Output) MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 3 M618x Series 3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO Product Dimension & Pinout Information MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 4 M618x Series 3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO Handling Information Although protection circuitry has been designed into the M618x oscillator, proper precautions should be taken to avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation. ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industrywide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was obtained using these circuit parameters. Model ESD Threshold, Minimum Human Body 1500* Charged Device 1500* * MIL-STD-833D, Method 3015, Class 1 Unit V V ATTENTION Static Sensitive Devices Handle only at Static Safe Work Stations Typical Test Circuits Test Circuit - N Package With Tristate MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 5 M618x Series 3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO Tape & Reel Specifications (all measurements are in mm) M618x A B C D E F G H J K L M N 3.6 5.4 1.5 5.5 1.9 4 8 12 180 13 20.2 60 12 Standard Tape and Reel: 1000 parts per reel Maximum Soldering Conditions Note: Exceeding these limits may damage the device. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 6 M618x Series 3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO Quality Parameters Test Electrical Characteristics Frequency vs. Temperature Mechanical Shock Vibration Thermal Cycle Aging Gross Leak Fine Leak Solderability Resistance to Solvents Physical Dimensions Internal Visual Environmental Specifications/Qualification Testing Performed Test Method Test Condition Internal Specification Per Specification Internal Specification Per Specification MIL-STD-202, Method 213, C 100 g’s MIL-STD-202, Method 201-204 10 g’s from 10-2000 Hz MIL-STD-883, Method 1010, B -55 Deg. C to +125 Deg. C, 15 minute Dwell, 10 cycles Internal Specification 168 Hours at 105 Degrees C MIL-STD-202, Method 112 30 Second Immersion MIL-STD-202, Method 112 Must meet 1x10-8 MIL-STD-883, Method 2003 8 Hour Steam Age – Must Exhibit 95% coverage MIL-STD-883, Method 2015 Three 1 minute soaks MIL-STD-883, Method 2016 Per Specification Internal Specification Per Internal Specification Load Circuit Load Circuit #7 - Clipped Sine Wave Output Load Circuit #2 - HCMOS Output DUT Output DUT Output Test Point Test Point 10K Ohms C Load 10 pF Note: C Load includes probe and fixturing. For custom products or additional specifications contact our sales team at 800.762.8800 (toll free) or 605.665.9321 For more information on this product visit the MtronPTI website at www.mtronpti.com 7