M220x Series 9x14 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML, Clock Oscillator Product Features Featuring QiK ChipTM Technology From order to ship in 2 weeks Superior Jitter Performance (less than 0.25 ps RMS, 12 kHz - 20 MHz) SAW replacement - better performance Frequencies from 150 MHz to 1.4 GHz QiK Chip™ Product Description The 220x series of oscillators are 9x14 J-Lead oscillators designed with the QiK ChipTM technology. The QiK ChipTM technology was specifically designed for crystal based oscillators to provide low jitter performance (as low as 0.25 ps RMS) and a wide range of frequency support (150.00 MHz to 1.4 GHz) and provides a breakthrough in lean manufacturing enabling product to be provided in less than 2 weeks. The M220x provides design engineers with the stability needed in their advanced applications and supports the need for parts to be supplied quickly so that the rest of their circuit design can be solidified. Product Applications Telecommunications such as SONET / SDH / DWDM / FEC / SERDES / OC-3 thru OC-192 1-2-4-10 Gigabit Fibre Channel Wireless Base Stations / WLAN / Gigabit Ethernet Avionic Flight Controls Military Communications Clock and Data Recovery SD/HD Video FPGA/ASIC Clock Generation Test and Measurement Equipment Product Ordering Information MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. Revision: 11-5-10 M220x Series 9x14 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML, Clock Oscillator Performance Characteristics PARAMETER Frequency Range Operating Temperature Storage Temperature Frequency Stability Aging 1st Year Thereafter (per year) Supply Voltage Symbol F TA TS ∆F/F Min. Typ. Max. 50 1400 (See ordering information) -55 +125 (See ordering information) Units MHz Vcc -3 -1 1.71 2.375 3.135 Input Current Load Icc ppm ppm V V V mA +3 +1 1.89 2.625 3.465 125 1.8 2.5 3.3 °C See Note 2 Electrical Specifications Environmental 45 Output Skew Differential Voltage Common Mode Output Voltage Logic “1” Level Logic “0” Level Rise/Fall Time Enable Function Vod Vod 250 0.7 Vcm Voh Vol Tr/Tf 20 15 20 350 .095 1.2 Vcc -1.02 LVDS/CML 55 % 450 1.20 ps ps ps mV Vpp LVPECL/LVDS/CML See Note 3 LVPECL Waveform LVDS/CML Waveform LVPECL – Vdd-1.3 V LVDS – 1.25 V LVPECL CML LVDS LVDS CML V LVDS 50 Ohms to (Vcc -2) Vdc 100 Ohm differential load Symmetry (Duty Cycle) Condition/Notes See Note 1 V Vcc -1.63 V 0.23 0.50 ns 80% Vcc min or N/C: Output active 0.5V max: Output disables to high-Z 0.5V max or N/C: Output active 80% Vcc min: Output disables to high-Z 10 ms LVPECL LVPECL @ 20/80% LVPECL, LVDS, CML Output Option B or G Output Option S or M Start up Time Phase Jitter @ 622.08 MHz 0.25 ps RMS Integrated 12 kHz – 20 MHz φJ Phase Noise @ 622.08 MHz 10 Hz -60 dBc/Hz 100 Hz -97 dBc/Hz 1 KHz -107 dBc/Hz 10 KHz -116 dBc/Hz 100 KHz -121 dBc/Hz 1 MHz -134 dBc/Hz 10 MHz -146 dBc/Hz 100 MHz -148 dBc/Hz Mechanical Shock Per MIL-STD-202, Method 213, Condition C (100 g’s, 6 mS duration, ½ sinewave) Vibration Per MIL-STD-202, Method 201 & 204 (10 g’s from 10-2000 Hz) Hermeticity Per MIL-STD-202, Method 112, (1x10-8 atm. cc/s of Helium) Thermal Cycle Per MIL-STD-883, Method 1010, Condition B (-55°C to +125°C, 15 min. dwell, 10 cycles) Solderability Per EIAJ-STD-002 Max Soldering Conditions See solder profile, Figure 1 Note 1: Contact factory for standard frequency availability over 945 MHz Note 2: Stability is inclusive of initial tolerance, deviation over temperature, shock, vibration, supply voltage, and aging for one year at 50°C mean ambient temperature. Note 3: See Load Circuit Diagram in this Datasheet. Consult factory with nonstandard output load requirements. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 2 M220x Series 9x14 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML, Clock Oscillator Phase Noise Plot Output Waveform Output Waveform: LVDS/CML/PECL MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 3 M220x Series 9x14 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML, Clock Oscillator Product Dimension & Pinout Information MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 4 M220x Series 9x14 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML, Clock Oscillator Handling Information Although protection circuitry has been designed into the M220x oscillator, proper precautions should be taken to avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation. ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industrywide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was obtained using these circuit parameters. Quality Parameters Part Marking Guide Line 1: Model Number Line 2: Frequency Line 3: Date Code Line 4: Pin 1 Indicator / MtronPTI MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 5 M220x Series 9x14 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML, Clock Oscillator Tape & Reel Specifications (all measurements are in mm) M220x A B C D E 10.00 14.20 1.50 11.50 4.85 F G H I J L P Q R S T 4.00 16.00 2.00 1.75 24.00 0.35 100.00 330.00 20.20 13.00 2.00 Standard Tape and Reel: 500 parts per reel Product Revision Table Date 7/20/07 Revision A PCN Number Details of Revision 10118 IC Revision to improve phase noise and electrical performance MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 6 M220x Series 9x14 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML, Clock Oscillator Maximum Soldering Conditions Solder Conditions Note: Exceeding these limits may damage the device. Typical Test Circuit & Load Circuit Diagrams For custom products or additional specifications contact our sales team at 800.762.8800 (toll free) or 605.665.9321 For more information on this product visit the MtronPTI website at www.mtronpti.com 7