Solid State High Power Amplifier 6.0 – 18.0 GHz, Wide Instantaneous Bandwidth, Built-in protection Broadband Series: PA1062 FEATURES Wideband. Agile. Powerful. Compact. Class AB GaN design 6.0 – 18.0 GHz 40 Watt output power 46 dB gain 32 Volt operation Control, use or deny the spectrum. Fully protected – load VSWR, input overdrive, over/under supply voltage, overcurrent Available as a module or rack mounted APPLICATIONS Broadband jamming Electronic warfare EMI / EMC test equipment The first task is to get your message through. The second is to prevent the other guy from getting his message through. The MtronPTI PA1062 Solid State Power Amp provides up to 40 Watts of CW power across the full bandwidth and less than 4.0 dBP-P gain flatness to meet the needs of broadband spectrum control. With full power operation from 6.0 GHz to 18 GHz and built in VSWR protection, the PA1062 has 46 dB of gain, perfect for standalone, array or TWT driver applications. MtronPTI’s line of Solid State Power Amplifiers is backed by a multi-national design and manufacturing team with more than 150 years combined PA design experience. MtronPTI’s continuing focus on client service ensures full program life engineering support from specification to production to next generation architecture planning. Like all MtronPTI’s SSPAs, the PA1062 is also available integrated with power supply, cooling and communications interface as a rack mountable unit for laboratory or fixed location applications. EA-6B Prowler – U.S. Navy photo by Photographer’s Mate 3rd Class Martion S. Fuentes. (RELEASED) Copyright © 2014 MtronPTI. All rights reserved. Rev. 20141118 | Page 1 of 2 2525 Shader Road, Orlando FL 32804 Mtronpti.com 407-298-2000 PA1062 Data Sheet Electrical Characteristics Parameter PASSBAND Operating Frequency Range Power Output Small Signal Gain Power Gain Flatness Input Return Loss Harmonics Non Harmonic Spurious Noise Figure Power Operating Voltage Current Consumption Max Input Power Load VSWR Protection Symbol Min. FCARRIER POUT_MIN ARF_MIN 6 40 46 RLIN 10 Typ. Max. Units 18 -25 -60 8.0 GHz Watts dB dBP-P dB dBc dBc dB 32 18 +8 VDC A dBm Max. +75 +85 95 Units °C °C % mm 4.0 NF VDD IDD PIN_MIN 30 Comment CW ARF_MAX – ARF_MIN Within the FSIG bandwidth into 50Ω At rated POUT Without damage ∞:1 Environmental & Physical Parameter Operating Case Temperature Storage Temperature Relative Humidity Dimensions Weight RF Connectors IN / OUT DC Power / Interface Connector Cooling D-Sub Connector Pin Assignments 1 N/C 2 N/C 3 Current Sensor 4 Temperature Sensor 5 Shutdown A1 VDD A2 GND Symbol TOC TSTR Min. -20 -40 5 Typ. 200 x 210 x 27 TBD SMA Female 7-pin Hybrid D-Sub External Heat Sink Comment Non-condensing Excluding connectors Cover Flange Forced air required Analog Analog TTL 32 VDC Ground Case Outline Revision History Date 20141118 Rev. A Orig. DPD Details of Revision Initial release in 2015 format Information provided by MtronPTI is believed to be accurate and reliable. However, no responsibility is assumed by MtronPTI for its use nor for any infringements or patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of MtronPTI. MtronPTI may change specifications without notice to improve end application performance or product manufacturability. Contact MtronPTI for the most up-to-date information. Copyright © 2014 MtronPTI. All rights reserved. Rev. 20141118 | Page 2 of 2 2525 Shader Road, Orlando FL 32804 Mtronpti.com 407-298-2000