Rack-Mount Solid State Power Amplifiers CPI Solid Inside and Out Ku- Band High Power SSPAs Ku-Band 100 watt S4UI series Ku-band solid state power amplifier— efficient and compact with CPI brick inside. Global Applications With CPI-built RF brick inside and plenty of thermal margin, SSPA is rock-solid, highly efficient and easy to maintain. Provides up to 100 watts of power in a 5.25" rack-mountable unit covering the 13.75 to 14.5 GHz or 14.0 to 14.5 GHz frequency bands. Meets International Safety Standard EN-60215, Electromagnetic Compatibility 2004/108/EC and Harmonic Standard EN-61000-3-2 to satisfy worldwide requirements. Multi-Carrier Digital Operation Highly linear: excellent AM/PM, phase noise and spectral regrowth performance. Worldwide Support Backed by over three decades of satellite communications experience, and CPI’s worldwide 24-hour customer support network that includes sixteen regional factory service centers. Simple to Operate User-friendly microprocessor-controlled logic with integrated RS422/485 computer interface, digitally controlled attenuator, and optional Ethernet interface. 811 Hansen Way P.O. Box 51625, Palo Alto, CA 94303 tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail: [email protected] www.cpii.com/satcom Rack Mount Solid State Power Amplifiers CPI-Built RF Brick Inside Ku -B a n d SPECIFICATIONS, S4UI Rack-Mount SSPA Electrical (continued) Electrical OPTIONS: • 1 RU Remote Control Panel • Redundant and Power Combined Subsystems Frequency Range 13.75 to 14.50 or 14.00 to 14.50 GHz RF Output Saturated, min. P1dB, min. 100 W (50.0 dBm) 80 W (49.0 dBm) Small Signal Gain (at max. 70 dB min. (at max. gain setting) Gain Adjustment Range 23 dB Gain Setting Resolution 0.1 dB Gain Stability Over -10°C to +50°C ±1.5 dB At constant temp. and drive ±0.25 dB Group Delay (in any 80 MHz band) 0.03 ns/MHz linear max. 0.003 ns/MHz 2 parabolic max. 1.0 ns pk-pk ripple max. Primary Power 100-240 VAC ±10%, single phase; 47-63 Hz Power Consumption 950 W typ. Power Factor 0.95 min. RF Output Monitor -50 dB ±3 nom. wrt output Environmental (Operating) Ambient Temperature -10°C to +50°C operating Relative Humidity 95% non-condensing ±0.3 dB pk-pk across any 40 MHz band; ±1.5 dB pk-pk across frequency band Altitude 10,000 ft. max. operating Low Power TVSS Option Clamp Voltage Small Signal Gain Slope ±0.04 dB/MHz max. Small Signal Gain Variation • L-Band BUC Input VSWR 1.3:1 max. • RF Input and Output Sampling Ports Output VSWR 1.3:1 max. 3rd Order Intermod -25 dBc max. at 3dB total backoff from P1dB Harmonic Output -60 dBc max. at P1dB • Ethernet Interface Spurious -60 dBc max. at P1 dB (-55 dBc w/ BUC option Mechanical Residual AM -50 dBc below 10 kHz -20 [1.5 +log F(kHz)] dBc, 10 kHz to 500 kHz -85 dBc above 500 kHz RF Input Connection Type N female RF Output Connection WR-75 waveguide flange, grooved Noise Power Density -70 dBW/4 kHz in transmit band RF Output Monitor Type N female Phase Noise 12 dB below IESS phase noise profile, max. Dimensions (W x H x D) AM/PM Conversion 2.5°/dB max. at 3dB backoff from P1dB 19.0 x 5.25 x 26 in. (483 x 134 x 661 mm); 19.0 x 7.00 x 26 in. (483 x 178 x 661 mm) with DC Power Supply Redundancy Option Weight 72 lbs (32.7 kg) typ, no options • DC Power Supply Redundancy Module • Hardened Power Supply • External Receive Band Reject Filter • Low Power Transient Voltage Surge Suppressor (TVSS) Energy Absorption Peak Current Shunt Cooling SSPA with optional redundant hot-swappable power supplies Mounting hardware is provided with each amplifier. Certificate Number: 30515 For more detailed information, please refer to the corresponding CPI Technical Description. Note: Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 209, ISSUE A 03/11 PDF 440 VDC (line to line protection); 400 VDC (line to ground protection) 2 ms/250 J (line to line protection) 10,000 A repetitive Forced air with integral blower