Oscilent Corporation | 672 - 673 Series Ceramic Resonator 1 of 3 Ceramic Resonator Series Number Package Description Last Modified 672 ~ 673 ZTACS / ZTTCS Ceramic SMD Resonator January 10 , 2012 . FEATURES - Extended temperature range - High stability Ceramic Resonator - RoHs Compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS Series No. 672 673 Type ZTACS ZTTCS Fig 1 2 *Higher Freq. Avail. Contact Oscilent for assistance. Frequency Range* Frequency Accuracy Stability in Temperature Aging for Ten Years (MHz) @ 25° (MHz) -20° ~ +80°C - 6.0 ~ 13.0 13.01 ~ 60.0 6.0 ~ 13.0 13.01 ~ 60.0 ±0.4% ±0.5% ±0.3% ±0.4% ±0.3% ±0.3% Oscilent Corporation | 672 - 673 Series Ceramic Resonator 2 of 3 Test Circuit IC Freq. 6.0 ~ 13.0 MHz: 13.01 ~ 60.0 MHz: IC: 1/6TC4069UBPx2 IC: 1/6TC74HCU04x2 . 2-PIN TYPE CERAMIC RESONATOR SMD Series No. 672 Frequency Range (MHz) Ro (ohm) 6.00~13.00 30max 13.01~20.00 20.01~25.99 40max 26.00~50.00 C1=C2 pF value 30pF±20% 15pF±20% TC Remark 0.4% 0.3% PF value is for testing circuit only TC Remark 5pF±20% 3-PIN TYPE CERAMIC RESONATOR SMD Series No. 673 Frequency Range (MHz) Ro (ohm) 6.00~13.00 30 13.01~16.00 16.01~25.99 26.00~50.00 TAPING SPECIFICATIONS Click here for tape information .. PART NUMBER GUIDE 40 C1=C2 pF value 22pF±20% 10pF±20% 5pF±20% 0.4% 0.3% PF value is for built-in capacitors only Oscilent Corporation | 672 - 673 Series Ceramic Resonator 3 of 3 Example: 672-12.0M-33-03W-TR Part Number Frequency Load Capacitance Frequency Accuracy ( % ) Operating Temp ( °C ) Packaging** 672 - 12.0M - 33 - 03 W Blank* = Bulk -TR = Tape/ Reel 672 = 673 = ZTACS ZTTCS e.g. -12.0M = 12.000 MHz Std. Range = 6.0 ~ 60.0 MHz Higher Freq. Avail. Contact Oscilent for assistance. Blank* = Standard as shown in above Table or Fill in the blank e.g 33 = 33pF Blank* = ±0.5% -03 = ±0.3% Blank* = -20 ~ +80 -N = -40 ~ +85 -W = -40 ~ +125 Click here for 672~673 tape information NOTE: Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: Click on the characteristic names above, for definitions of the particular characteristic. *STANDARDS: "Blank" part number selections, indicate standard variables for the particular characteristic. **PACKAGING: Click on the packaging name above for Tape/Reel specifications Series No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 672 to 673