Oscilent Corporation PRODUCT SPECIFICATION REV A January 2010 Oscilent Controlled Document Ordering Code / Part Number Product Description 860-RF1575.42M-J GPS, RF SAW Filter Specification Contents o Mechanical Dimensions o Test Circuit o Maximum Ratings o Electrical Specification o Frequency Performance Notes o Electrostatic Sensitive Device (ESD) o Avoid excessive ultrasonic exposure o Solderability compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature o This product complies with EU directive 2002/95/EC (RoHS compliance) Oscilent Corporation Telephone: 1.949.252.0522 Fax: 1.949.252.0522 Email: [email protected] Product Specification www.oscilent.com Oscilent Part Number 860-RF1575.42M-J GPS, RF SAW Filter January 2010 Rev A Mechanical Dimensions (mm) Pin Description A, C Ground B In D Out Test Circuit Source and Load Impedance: 50 Ω Product Specification P. 1 www.oscilent.com Oscilent Part Number 860-RF1575.42M-J GPS, RF SAW Filter January 2010 Rev A Maximum Ratings Parameters Description Unit Minimum Typical Maximum Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -40 - +85 Maximum DC Voltage V - - 5 Maximum Input Power dBm - - 10 Source Impedance (single ended)(1) Ω - 50 - Load Impedance (single ended)(1) Ω - 50 - Notes: (1) No Matching Network (Ref. Testing Environment Circuit as shown above). Electrical Specification Parameters Description Unit Minimum Typical Maximum Center Frequency (Fo) MHz - 1575.42 - dB - 0.85 1.00 dBp-p - 0.05 0.30 500.0 ~ 894.0 MHz dB 20 24 - 894.0 ~ 1500.0 MHz dB 21 25 - 1650.0 ~ 2000.0 MHz dB 25 28 - 2000.0 ~ 4000.0 MHz dB 20 27 - - - 1.20 1.60 Insertion Loss within 1574.42~1576.42 MHz Amplitude Ripple within 1574.42~1576.42 MHz Attenuation: VSWR within 1574.42~1576.42 MHz Product Specification P. 2 www.oscilent.com Oscilent Part Number 860-RF1575.42M-J GPS, RF SAW Filter January 2010 Rev A Frequency Performance Product Specification P. 3 www.oscilent.com