Oscilent Corporation PRODUCT SPECIFICATION REV A January 2010 Oscilent Controlled Document Ordering Code / Part Number Product Description 805-RF325.3M-B Wireless, RF SAW Filter Specification Contents o Mechanical Dimensions o Test Circuit o Maximum Ratings o Electrical Specification o Frequency Performance Notes o Electrostatic Sensitive Device (ESD) o Avoid excessive ultrasonic exposure o Solderability compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature o This product complies with EU directive 2002/95/EC (RoHS compliance) Oscilent Corporation Telephone: 1.949.252.0522 Fax: 1.949.252.0522 Email: [email protected] Product Specification www.oscilent.com Oscilent Part Number 805-RF325.3M-B Wireless, RF SAW Filter January 2010 Rev A Mechanical Dimensions (mm) Pin Description B, D, F, H Ground A, C In G, E Out Test Circuit Source and Load Impedance: 200 Ω Product Specification P. 1 www.oscilent.com Oscilent Part Number 805-RF325.3M-B Wireless, RF SAW Filter January 2010 Rev A Maximum Ratings Parameters Description Unit Minimum Typical Maximum Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -40 - +85 Maximum DC Voltage V - - 5 Maximum Input Power dBm - - 20 Source Impedance (single ended)(1) Ω - 200 - Load Impedance (single ended)(1) Ω - 200 - Parameters Description Unit Minimum Typical Maximum Center Frequency (Fo) MHz - 325.3 - dB - 1.4 3.5 - - 0.8 2.0 Fo-100.0 ~ Fo-39.5 MHz dB 45 55 - Fo+39.5 ~ F+100.0 MHz dB 45 55 - Notes: With Matching Network Electrical Specification Insertion Loss in 322.0 ~ 328.6 MHz Amplitude Ripple in 322.0 ~ 328.6 MHz Stop Band Attenuation: Product Specification P. 2 www.oscilent.com Oscilent Part Number 805-RF325.3M-B Wireless, RF SAW Filter January 2010 Rev A Frequency Performance Product Specification P. 3 www.oscilent.com Oscilent Part Number 805-RF325.3M-B Wireless, RF SAW Filter January 2010 Rev A VSWR Smith Chart Product Specification P. 4 www.oscilent.com