Oscilent Corporation PRODUCT SPECIFICATION REV A January 2010 Oscilent Controlled Document Ordering Code / Part Number Product Description 808-RF2140.0M-D WCDMA, RX-RF SAW Filter Specification Contents o Mechanical Dimensions o Test Circuit o Maximum Ratings o Electrical Specification o Frequency Performance Notes o Electrostatic Sensitive Device (ESD) o Avoid excessive ultrasonic exposure o Solderability compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature o This product complies with EU directive 2002/95/EC (RoHS compliance) Oscilent Corporation Telephone: 1.949.252.0522 Fax: 1.949.252.0522 Email: [email protected] Product Specification www.oscilent.com Oscilent Part Number 808-RF2140.0M-D WCDMA, RX-RF SAW Filter January 2010 Rev A Mechanical Dimensions (mm) Pin Description B, E Ground A In C, D Out Test Circuit Source Impedance: 50Ω Load Impedance: 100 Ω Product Specification P. 1 www.oscilent.com Oscilent Part Number 808-RF2140.0M-D WCDMA, RX-RF SAW Filter January 2010 Rev A Maximum Ratings Parameters Description Unit Minimum Typical Maximum Operating Temperature Range °C -30 - +85 Storage Temperature Range °C -40 - +85 Maximum DC Voltage V - - 4 Maximum Input Power dBm - - 10 Source Impedance (single ended)(1) Ω - 50 - Load Impedance (balanced ended)(1) Ω - 100 - Notes: (1) With Matching Network (Ref. Testing Environment Circuit as shown above) Electrical Specification Parameters Description Unit Minimum Typical Maximum Center Frequency (Fo) MHz - 2140.0 - dB - 1.6 2.0 dBp-p - 0.5 1.5 D.C ~ 1980.0 MHz dB 35 40 - 1980.0 ~ 2050.0 MHz dB 20 25 - 2230.0 ~ 2300.0 MHz dB 15 17 - 2300.0 ~ 4000.0 MHz dB 25 28 - 4000.0 ~ 6000.0 MHz dB 35 45 - - - 1.9 2.3 Insertion Loss within 2110.0~2170.0MHz Amplitude Ripple within 2110.0~2170.0MHz Attenuation: VSWR within 2110.0~2170.0MHz Product Specification P. 2 www.oscilent.com Oscilent Part Number 808-RF2140.0M-D WCDMA, RX-RF SAW Filter January 2010 Rev A Frequency Performance Product Specification P. 3 www.oscilent.com