Mini Polarization Insensitive Fiber Isolator (Single Stage) Mini OISS Series Product Description Oplink’s state of the art, mini polarization-insensitive isolators offer the smallest package size, 3.0×25mm, which saves 60% real estate comparing to standard isolators, with excellent performance such as super low insertion loss, low polarization dependent loss (PDL), low wavelength dependent loss (WDL), and high isolation. Low PMD version is also available. It also has a package option with 80µm reduced cladding fiber pigtail, which results in small bending radius and low bending losses. Oplink mini isolator can sustain high optical power due to its optical path epoxyfree packaging. It is qualified to Telcordia GR-1221 standards. Ø (mm) INPUT OUTPUT L (mm) Performance Specificationns Mini OISS Series Operating Wavelength Range Features P Grade A Grade 1310 ± 15 1480 ± 15 C-band : 1528 ~ 1564 L-band : 1570 ~ 1605 Unit Low Insertion Loss nm 0.35 0.40 dB Isolation (Min.) : (over operating wavelength range, 0~70°C, all SOP) 22 21 dB Wavelength Dependent Loss (Max.) 0.1 0.1 dB 55/50 55/50 dB Polarization Dependent Loss (PDL) (Max.) 0.05 0.10 dB Polarization Mode Dispersion (PMD) (Max.) 0.25 0.25 ps Insertion Loss (Max.) [1] Return Loss (Input/Output Ports) Maximum Power Handling Operating Temperature Storage Temperature Fiber Jacket Package Dimensions [3] 2 W 0 to +70 °C -40 to +85 °C Corning SMF-28 : 250μm bare fiber Pure Mode RC SMF-28 : 80μm bare fiber P3 : (ø) 3.0 x (L) 25.0 Super Compact Size Low Insertion Loss Variation Over Wavelength High Power Handling Highly Stable & Reliable Epoxy-free Optical Path 80μm Fiber Pigtail Option Applications EDFA & Raman Amplifiers Fiberoptic Instruments Fiberoptic Network Links Transmitters and Fiber Lasers mm Notes: [1] The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. [2] All the parameters are excluding connectors. [3] The mechanical tolerance should be +/-0.2mm on all package dimensions unless otherwise custom specified. [4] For Low PMD version, the PMD (max.) spec is 0.05 ps, and insertion loss spec is 0.05dB higher. S0057 - R05. 20100802 Mini Polarization Insensitive Fiber Isolator (Single Stage) Mini OISS Series Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com OISS 0 3 Wavelength PMD Options Fiber Length** 1310 nm= 1310 1480 nm= 1480 1550 nm= 1550 1585 nm= 1585 Standard = S Low PMD = L 0.5 meter = H 1.0 Meter = 1 1.5 Meters = 5 2.0 Meters = 2 Grade P Grade = P A Grade = A Package Type P3 = 3 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A Fiber Type 250μm SMF-28 = 1 PureMode RC SMF-28 80μm = 8* Note: * no connector options for PureMode RC SMF-28 80μm fiber. ** The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. *** RoHS: Add “G” to the end of the above PN for RoHS 6 Requirement. S0057 - R05. 20100802 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules