Mini Polarization Insensitive Fiber Isolator (Dual Stage) Mini OIDS Series Features • Super Compact Size • Low Insertion Loss • High Isolation • Low PMD • High Power Handling • Highly Stable & Reliable • Epoxy-Free Optical Path • 80 µm Fiber Pigtail Option Mini Polarization Insensitive Fiber Isolator (Dual Stage) Oplink's state of the art, mini polarization-insensitive isolators offer the smallest package size, 3.0×25mm, which saves 60% real estate comparing to standard isolators, with excellent performance such as super low insertion loss, high isolation, low polarization dependent loss (PDL), and low polarizartion mode dispersion. It also has a package option with 80mm reduced cladding fiber pigtail, which results in small bending radius and low bending losses. Oplink mini isolator can sustain high optical power due to its optical path epoxy-free packaging. It is qualified to Telcordia GR-1221 standards. Applications • EDFA & Raman Amplifiers • Fiberoptic Instruments • Fiberoptic Network links • Transmitters and Fiber Lasers Performance Specifications Mini OIDS Series Operating Wavelength Range Oplink Fiber Optic Product Lines Amplifier Components Amplifier Modules DW DMs Switching/Routing/ Monitoring/ Conditioning Transmission RGB Laser Modules Oplink Communications, Inc. Insertion Loss Max.(over operating wavelength range,0~70°C,all SOP) Isolation Min. (over operating wavelength range, 0~70°C, all SOP) Wavelength Dependent Loss Max. Return Loss ( Input / Output ) Min. Polarization Dependent Loss (PDL) Max. Polarization Mode Dispersion (PMD) Max. Maximum Power Handling Operating Temperature Storage Temperature Fiber Type Package Dimension Specifications 1310 ± 20 1480 ± 20 1528 ~ 1564 or 1570 ~ 1605 0.50 40 0.15 55/50 0.10 0.05 2 0 to +70 -40 to +85 SMF-28, 250µm Bare Fiber PureMode RC SMF-28 80µm P3: (φ)3.0 x (L)25 Values are referenced without connector loss. * The mechanical tolerance should be +/- 0.2 mm on all package dimensions unless otherwise custom specified. Units nm dB dB dB dB dB ps W °C °C mm Mini Polarization Insensitive Fiber Isolator (Dual Stage) Mechanical Footprint Dimension (unit: mm) ∅ (mm) OUTPUT INPUT L(mm) Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink's OEM design team or account manager for your requirements and ordering information (510) 933-7200. 0 OIDS Wavelength 1310 nm=1310 1480 nm=1480 1550 nm=1550 1585 nm=1585 0 0 3 Package Type P3 = 3 Fiber Length 1.0 meter = 1 1.5 meter = 5 2.0 meter = 2 0.5 Meter = H Fiber Type SMF-28 250 μm =1 PureMode RC SMF-28 80μm =8* Note: *no connector options for PureMode RC SMF-28 80μm fiber. Connector Type None = 1 FC/PC=2 FC/SPC=3 FC/APC=4 SC/PC=5 SC/SPC=6 SC/APC=7 ST=8 LC=9 MU=A 46335 Landing Parkway Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected]