LAN-WDM LWDM Series Product Description Oplink’s Green LAN (Local Area Network) Wavelength Division Multiplexer is designed to meet industrial stringent size and loss requirement. Based on Thin-Film-Filter (TFF) and Micro-optics, this low loss LWDM features small form factor, ultra low insertion loss, high channel isolation, and unparallel reliability. The technology is a lead-free packaging platform and no epoxy in the optical path. The LAN-WDM is Telcordia GR-1221and GR-1209 qualified, and complied with industry green initiatives such as RoHS and WEEE. Product Configurations COM CH1 CH2 CH3 CH4 Performance Specificationns Parameters Operating Wavelength Features Symbol Min λop 1280 Channels Number Non-Adjacent Channel Isolation mm Devices may be used as Multiplexer or Demultiplexer GHz Environmental Green Plan Compliance 800 1295.56 1296.59 CH2 1299.02 1300.05 1301.09 1303.54 1304.58 1305.63 1308.09 1309.14 1310.19 CH3 Premium Grade Standard Grade Demux Mux Demux Mux Directivity λi IL IS adj IS Non- adj DIR Polarization Dependent Loss TDL (-5 C~80 C) o Small Form Factor 1330 1294.53 Passband Flatness Adjacent Channel Isolation Unit CH1 CH4 Insertion Loss Max 4 Channel Spacing Channel ITU Wavelength Typ o Compared with IL in room temperature nm High Channel Isolation 1.5 dB Epoxy-Free Optical Path 1.9 dB RoHS 6 Compliant 0.5 dB dB Applications 15 dB 35 dB WDM System for Local Area Network Market 15 dB 50 55 dB PDL 0.5 dB TDL 0.5 dB 300 mW RL 45 50 -5 80 o Storage Temperature -40 85 o 0.3 dB 0.4 dB Fiber Type PC type APC type Optimized package for CFP transceiver modules Following 100 Gbps IEEE 802.3ba standard dB Operating Temperature Pair Connector Loss High Reliability 25 Optical Power Handling Return Loss Ultra-low Insertion Loss C C Notes: [1] The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. [2] All the parameters are without connectors. Corning XB fiber or equivalent S0465 - R01. (web) 20150615 LAN-WDM LWDM Series 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com Mechanical Drawing / Package Dimensions (dimension in mm) Note : port assignment will vary due to different configuration, please contact Oplink’s sales department for further information. Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. LWDM 4 S 0 0 1 0 Channels Grade Type Fiber Length * Premium = P Standard = S 0.5 meter = H 1.0 meter = 1 1.5 meter = 5 2.0 meter = 2 Product Type Mux = M Demux = D Central Wavelength 1 Fiber Jacket ** 250 μm bare fiber = 1 S001=1295.56/ 1300.05/ 1304.58/ 1309.14 Connector Type ** None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC/PC = 9 MU = A LC/APC = B * The tolerance of fiber length is +/-0.1m (for connector option only, without connector, just keep the length as minimum). 1 meter is standard. The lead-time for special fiber length will be longer. ** For other special Fiber Jacket/connector, please contact Oplink’s sales department for further information S0465 - R01. (web) 20150615 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Interconnect Transmission HFC/RoF Subsystem