Green Low Loss CWDM LLCC Series Product Description Oplink’s Green Low Loss Coarse Wavelength Division Multiplexer is designed to meet industrial stringent size and loss requirement. Based on Thin-Film-Filter (TFF) and Micro-optics, this low loss CWDM features small form factor, ultra low insertion loss, high channel isolation, and unparallel reliability. The technology is a lead-free packaging platform and no epoxy in the optical path. The Green Low Loss CWDM is Telcordia GR-1221and GR-1209 qualified, and complied with industry green initiatives such as RoHS and WEEE. Performance Specificationns Min Center Wavelength λC Refer to Channel Plan Below nm Small Form Factor 20 nm Environmental Green Plan Compliance nm Ultra-Low Insertion Loss nm High Reliability Channel Spacing Channel Passband 13 1310 Express Passband Insertion Loss within Passband 1) Typical Max 15 1260 1360 4ch CWDM 0.8 1.0 8ch CWDM 1.0 1.5 CWDM Expansion (4ch CWDM only) 1.0 1.3 1310 Express 0.6 0.8 0.3 0.5 Passband Ripple Unit Features LLCC Series High Channel Isolation dB RoHS 6 Compliant dB Adjacent Channel Isolation 30 40 dB Non-adjacent Channel Isolation 45 50 dB 1310 Express Isolation over CWDM Bands 40 45 dB CWDM Expansion Isolation over CWDM Bands (4ch 13 15 dB Return Loss 45 50 dB Directivity 55 CWDM only) 0.20 dB Polarization Mode Dispersion (PMD) 0.20 ps Operating Power 300 mW Operating Temperature -5 to +70 °C Storage Temperature -40 to +85 °C Package Dimensions 3) G.657A2 or equivalent Standard 66.2 x 27.5 x 6.0 Compact 53 x 27.5 x 6.0 (With boots, 250 or 900µm fiber jacket) mm (Without boots, 250µm fiber jacket only) Applications WDM System for Metro/Access Market dB Polarization Dependent Loss (PDL) Fiber Type Epoxy-Free Optical Path Notes: [1] The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. [2] All the parameters are without connectors. [3] The mechanical tolerance should be +/-0.2mm on all package dimensions unless otherwise custom specified Channel Plan 1471.0 1491.0 1511.0 1531.0 1551.0 1571.0 1591.0 1611.0 S0022 - R07. (web) 20150217 Green Low Loss CWDM LLCC Series Mechanical Drawing / Package Dimensions (dimension in mm) 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com Standard Package Compact Package Note: port assignment will vary due to different configuration, please contact Oplink’s sales department for further information. Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. LLCC 0 2 0 Spacing 1310 Express Port CWDM Expansion Port Fiber Length* 20 nm = 2 w/o Exp = 0 w/ Exp = 1 8ch CWDM = 0 4ch w/o Exp = 1 4ch w/ Exp = 2 0.5 meter= H 1.0 meter= 1 1.5 meter= 5 2.0 meter= 2 Package & Fiber Jacket Type Channel Plan Standard package w/ 250 μm bare fiber = S001 Standard package w/ 900 μm loose tube = S002 Compact package w/ 250 μm bare fiber = C001 8ch CWDM = 00 4ch CWDM 1471~1531 = 01 4ch CWDM 1551~1611 = 02 4ch CWDM 1511~1571 = 03 4ch CWDM 1471/1491/1591/1611 = 04 ** Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC/PC = 9 MU = A LC/APC = B * The tolerance of fiber length is +/-0.1m (for connector option only, without connector, just keep the length as minimum). 1 meter is standard. The lead-time for special fiber length will be longer. ** For other wavelength plan, please contact Oplink’s sales department for further information. S0022 - R07. (web) 20150217 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Interconnect Transmission HFC/RoF Subsystem