Green C Band Supervisory Channel (1500-1520 nm) Micro-Optic WDM MWDMGCSU Series Features • Environmental Green Plan Compliance • Wide Operating Wavelength Range • Low Insertion Loss • High Channel Isolation • Ultra Flat Wide Passband • Highly Stable & Reliable • Epoxy-Free Optical Path Green C Band Supervisory Channel (1500-1520 nm) Micro-Optic WDM Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on thinfilm filter technology and patented athermal platform for optical device. MWDM-SU is used to add or drop supervisory channels. This device offers very flat and wide passband, low insertion loss, and high isolation, which make it ideal for high-power Optical Amplification Systems and DWDM Network applications. Oplink MWDM devices are Bellcore GR-1221 qualification tested and complied with industry green initiatives such as Rohs and WEEE. All Oplink products are epoxy-free in the optical path. Applications • Fiber Amplifiers • System Monitoring • Fiberoptic Instruments • Laboratory R&D Performance Specifications Oplink Fiber Optic Product Lines Amplifier Components Amplifier Modules DW DMs Switching/Routing/ Monitoring/ Conditioning Transmission RGB Laser Modules Oplink Communications, Inc. MWDMGCSU Series Min Max Units Pass Channel Wavelength Range 1 Reflection Channel Wavelength Range 2 Insertion Loss* Pass Channel @ 1 Reflect Channel @ 2 Isolation Reflect Channel @ 1 Pass Channel @ 2 Passband Ripple Directivity Return Loss Polarization Dependent Loss Polarization Mode Dispersion Maximum Power Handling Operating Temperature Storage Temperature Package Dimension** SMF-28 bare fiber 900 µm loose tube 1500 1530 1520 1563 0.8 0.6 nm nm dB dB dB dB dB dB dB dB ps mW °C °C mm mm 12 30 0.3 50 50 0 -40 P1: (Ø)5.5x (L)34 P2: (Ø)5.5 x (L)40 0.1 0.05 500 70 85 * Values are referenced without connector loss. ** The mechanical tolerance should be +/- 0.2 mm on all package dimensions unless otherwise custom specified. Green C Band Supervisory Channel (15001520 nm) Micro-Optic WDM MWDMGCSU Series Mechanical Footprint Package Dimension (unit: mm) Ordering Information Oplink can provide a range of customized optical solutions. For detail, please contact Oplink's OEM design team or account manager for your requirements and ordering information (510) 933-7200. MWDMG C S U Wavelength 1620nm pass =CSU * 1 meter is standard. The lead time for special fiber length will be longer. 0 0 0 Fiber Length 0.5 Meter=H 1.0 Meter=1* 1.5 Meters=5 2.0 Meters=2 Package & Fiber Type P1 + SMF-28 250µm =11 P2 + SMF-28 with 900µm loose tube =22 Connector Type None=1 FC/PC=2 FC/SPC=3 FC/APC=4 SC/PC=5 SC/SPC=6 SC/APC=7 ST=8 LC=9 MU=A 46335 Landing Parkway Fremont, CA 94538-6407 Tel: (510 933-7200 Fax: (510) 933-7300 Email: [email protected]