OPLINK MWDMGLSU00011H1

Green L Band Supervisory Channel (16201640 nm) Micro-Optic WDM
MWDMGLSU Series
Product Description
Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on
thin-film filter technology and patented athermal platform for optical device.
The MWDMLSU offers flat and wide passband, low insertion loss, and high isolation, which make this device ideal for high-power Optical Amplification Systems and DWDM Network applications. Oplink MWDM devices are Bellcore
GR-1221 qualification tested and complied with industry green initiatives such
as Rohs and WEEE. All Oplink products are epoxy-free in the optical path.
Performance Specificationns
MWDMGLSU Series
Min
Pass Channel Wavelength Range λ1
Reflection Channel Wavelength Range λ2
Insertion Loss *
Pass Channel @ λ1
Reflect Channel @ λ2
Isolation
Reflect Channel @ λ1
Pass Channel @ λ2
Typical
Max
Unit
1620
1640
nm
1400
1608
nm
0.8
0.6
dB
12
20
dB
Passband Ripple
0.30
dB
Directivity
50
dB
Return Loss
50
dB
Polarization Dependent Loss
0.1
Polarization Mode Dispersion
0.05
ps
Maximum Power Handling
500
mW
Fiber Type
Storage Temperature
Package Dimensions **
250 μm Bare Fiber
900 μm Loose Tube
 Environmental Green Plan
Compliance
 Wide Operating Wavelength Range
 Low Insertion Loss
 High Channel Isolation
 Ultra Flat Wide Passband
 Highly Stable & Reliable
 Epoxy-free Optical Path
dB
Corning SMF-28
Operating Temperature
Features
0 to +70
°C
-40 to +85
°C
P1: (ø) 5.5 x (L) 34.0
P2: (ø) 5.5 x (L) 40.0
mm
Applications
 Fiberoptic Amplifiers
 System Monitoring
 Fiberoptic Instruments
 Laboratory R&D
Note:
* Values are referenced without connector loss.
** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified.
*** The maximum IL is under all states of polarization and within the full operating temperature and
wavelength ranges specified.
R03.20081118
Green L Band Supervisory Channel
(1620-1640 nm) Micro-Optic WDM
MWDMGLSU Series
Mechanical Drawing / Package Dimensions (dimension in mm)
P1: SMF-28 250 µm bare fiber
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com
P2: 900 µm loose tube
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
MWDMG
L
S
U
0
0
0
Wavelength
Fiber Length*
1620~1640 nm pass = LSU
0.5 meter = H
1.0 meter = 1
1.5 meters = 5
2.0 meters = 2
Package & Fiber Jacket
P1 + 250 μm bare fiber = 11
P2 + 900 μm loose tube = 22
Connector Type
None = 1
FC/PC = 2
FC/SPC = 3
FC/APC = 4
SC/PC = 5
SC/SPC = 6
SC/APC = 7
ST = 8
LC = 9
MU = A
* The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer.
R03.20081118
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules