OSA Opto Light GmbH Köpenicker Str. 325 / Haus 201 12555 Berlin - Germany Tel. +49 (0)30 65 76 26 83 Fax: +49 (0)30 65 76 26 81 E-Mail: [email protected] Series 156 - 1206 low current Features - size 1206: 3.2(L) x 1.6(W) x 1.2(H) mm low current circuit substrate: glass laminated epoxy devices are ROHS conform lead free solderable. soldering pads: gold plated taped in 8 mm blister tape. cathode to transporting perforation - all devices sorted into luminous intensity classes - taping: face-up (TU) or face-down (TD) possible Absolute Maximum Ratings IF, max[mA] 5 IF,P [mA] tp ≤ 100 µs τ=1: 10 20 VR [V] IR, max [µA] 5 100 Thermal resistance R thJA [K / W] 450 TOp [°C] TSt °[C] -40...85 -40...100 5 IF [mA] 4 Maximal forward current (DC) characteristic 3 2 1 0 -40 -20 0 20 40 60 80 100 Top[°C] electrostatic discharge classification (MIL-STD-883E) class 1 Electro-Optical Characteristics Type OLS-156 BA460 Emitting color blue Marking at cathode Measurement IF [mA] 2 typ 2.7 VF[V] max 3.2 λ d / λ p* [nm] 460 IV[mcd] min typ 4.0 6.0 © 2009 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] edition 11/09 90 120 1,0 60 150 30 0,5 view angle 0,0 180 0 IF (mA) 10 UF – IF characteristic 1 2,4 2,6 2,8 3,0 3,2 3,4 3,6 UF (V) Iv rel (at 20 mA ) 1 IF – Iv, rel characteristic 0 10 20 30 IF (mA) © 2009 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] edition 11/09 Outline Drawing Recommended Soldering Patterns Soldering Conditions 300 250 Temperature (°C) 10-20 s 230°C 200 150 IR reflow soldering profile Max. 40 s 100 50 0 50 100 150 200 250 300 Time (sec) IR reflow soldering profile for lead free soldering Manual soldering: max power of iron 25W/ 3s/ 300°C © 2009 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] edition 11/09 Ordering Code For Parts Series Color OLS-156 - ??????? Encapsulation - ? - Packaging ? TU - taped up TD - taped down C - colored (standard) possible for red. green. blue XD - uncolored diffused CD - colored diffused possible for red. green. blue X - uncolored clear Type definition, e.g. OLS-156 BA460-C -TU LED Luminous Intensity Groups And Subgroups [ mcd ] (general information – not this device specific) C: D: E: F: G: H: J: K: L: M: N: P: Q: R: S: T: U: V: W: X: Y: Z: 0.28 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18 28 45 71 112 180 280 450 710 1120 1800 2800 4500 - 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18.00 28 45 71 112 180 280 450 710 1120 1800 2800 4500 7100 C1: C2: D1: D2: E1: E2: F1: F2: G1: G2: H1: H2: J1: J2: K1: K2: L1: L2: M1: M2: N1: N2: 0.28 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 - 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 P1: P2: Q1: Q2: R1: R2: S1: S2: T1: T2: U1: U2: V1: V2: W1: W2: X1: X2: Y1: Y2: Z1: Z2: 45 56 71 90 112 140 180 224 280 355 450 560 710 900 1120 1420 1800 2250 2800 3550 4500 5750 - 56 71 90 112 140 180 224 280 355 450 560 710 900 1120 1420 1800 2250 2800 3550 4500 5750 7100 Measured according to CIE 127. All SMD-LEDs are 100% measured and selected on full automated equipment with an accuracy of ± 11 %. Special service: Brightness selection in sub selections possible. Color selection in 3 sub selections possible (each subgroup per reel). © 2009 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] edition 11/09 Tape And Reel Packing D 180 mm 330 mm Packing: Parts/reel 3000 12000 The reel is sealed in special plastic bag with integrate ESD protection ( MIL - STD 81705 ) including a silica dry-pack Label Order No. XXXXXXXXX Type OLS-156 ?????-??-T Intensity group ZZ Charge No. 1122-AAAAAA Quantity 9999 Customer order No. Color class: CC Color class - optional 11 Week – 22 year – A internal identification Attention please: The information describes the type of component and shall not considered as assured characteristics. Terms of delivery and rights to change reserved. Due to technical requirements components may contain dangerous substances. The data sheet may changed without prior information; the valid issue will be on our webpage in internet. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. OSA opto light does not have the responsibility for the reliability and the degradation behaviour of products made with OSA opto light diodes because they depend not only on the diode but also on the conditions of manufacture or design of the final products. Packaging: Please use the recycling operators known to you. Components used in life support devices or systems and safety systems must be expressly authorized for such purpose! © 2009 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected]