OSA Opto Light GmbH Köpenicker Str. 325 / Haus 201 12555 Berlin - Germany Tel. +49 (0)30 65 76 26 83 Fax: +49 (0)30 65 76 26 81 E-Mail: [email protected] Series 400 - Ceramics green Features - size 3,0(L) x 2,0(W) x 1,0(H) mm circuit substrate: Al2O3 Ceramics devices are ROHS conform lead free solderable, soldering pads: gold plated taped in 8 mm blister tape, cathode to transporting perforation all devices sorted into luminous intensity classes taping: face-up (T) high luminous intensity types on request sorted in color classes Absolute Maximum Ratings IF, max[mA] 20 IF,P [mA] tp ≤ 100 µs τ=1: 10 100 VR [V] IR, max [µA] 5 100 Thermal resistance R thJA [K / W] 60 TOp [°C] TSt °[C] -40...85 -40...100 20 IF [mA] 15 Maximal forward current (DC) characteristic 10 5 0 -40 -20 0 20 40 60 80 Top[°C] electrostatic discharge classification (MIL-STD-883E) class 1 Electro-Optical Characteristics Type OCL-400 GB525 OCL-400 GC525 Emitting color green green Marking at cathode cathode Measurement IF [mA] 20 20 typ 3,3 3,3 VF[V] max 4,0 4,0 λ d / λ p* [nm] 525 525 IV[mcd] min typ 180 280 280 400 Wavelength between 500 and 535 nm upon request possible © 2009 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] edition 03/09 90 120 1,0 60 0,8 0,6 30 150 view angle 0,4 0,2 0,0 180 0 0,2 0,4 0,6 0,8 1,0 IF (mA) 10 UF – IF characteristic 1 2,5 3,0 3,5 UF (V) Iv rel (at 20 mA ) 1 IF – Iv, rel characteristic 0 10 20 30 IF (mA) © 2009 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] edition 03/09 Outline Drawing Recommended Soldering Patterns Soldering Conditions 300 250 Temperature (°C) 10-20 s 230°C 200 150 IR reflow soldering profile Max. 40 s 100 50 0 50 100 150 200 250 300 Time (sec) IR reflow soldering profile for lead free soldering Manual soldering: max power of iron 25W/ 3s/ 300°C © 2009 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] edition 03/09 Ordering Code For Parts Series Color OCL-400 - ??????? Encapsulation - X - Packaging T T - taped X - uncolored clear Type definition, e.g. OCL-400 GB525-X -T LED Luminous Intensity Groups And Subgroups [ mcd ] (general information – not this device specific) C: D: E: F: G: H: J: K: L: 0.28 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 - 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18.00 M: N: P: Q: R: S: T: U: V: W: X: Y: Z: 18 28 45 71 112 180 280 450 710 1120 1800 2800 4500 - 28 45 71 112 180 280 450 710 1120 1800 2800 4500 7100 C1: C2: D1: D2: E1: E2: F1: F2: G1: G2: H1: H2: J1: J2: K1: K2: L1: L2: M1: M2: N1: N2: P1: P2: 0.28 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 - 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 71.00 Q1: Q2: R1: R2: S1: S2: T1: T2: U1: U2: V1: V2: W1: W2: X1: X2: Y1: Y2: Z1: Z2: 71 90 112 140 180 224 280 355 450 560 710 900 1120 1420 1800 2250 2800 3550 4500 5750 - 90 112 140 180 224 280 355 450 560 710 900 1120 1420 1800 2250 2800 3550 4500 5750 7100 Measured according to CIE 127. All SMD-LEDs are 100% measured and selected on full automated equipment with an accuracy of ± 11 %. Special service: Brightness selection in sub selections possible. Color selection in 3 sub selections possible (each subgroup per reel). © 2009 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] edition 03/09 Tape And Reel Packing D 180 mm 330 mm Packing: Parts/reel 2000 8000 The reel is sealed in special plastic bag with integrate ESD protection ( MIL - STD 81705 ) including a silica dry-pack Label Order No. XXXXXXXXX Type OCL-400 ?????-??-T Intensity group ZZ Charge No. 1122-AAAAAA Quantity 9999 Customer order No. Color class: CC Color class - optional 11 Week – 22 year – A internal identification Attention please: The information describes the type of component and shall not considered as assured characteristics. Terms of delivery and rights to change reserved. Due to technical requirements components may contain dangerous substances. The data sheet may changed without prior information; the valid issue will be on our webpage in internet. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. OSA opto light does not have the responsibility for the reliability and the degradation behaviour of products made with OSA opto light diodes because they depend not only on the diode but also on the conditions of manufacture or design of the final products. Packaging: Please use the recycling operators known to you. Components used in life support devices or systems and safety systems must be expressly authorized for such purpose! © 2009 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected]