Carling Technologies 1S-Series Sub-Miniature Rocker Switches ™ 1S1-Series Sub-Miniature Rocker Switch 1SS-Series Sealed Sub-Miniature Rocker Switch Specifications Contact Rating . . . . . . . . . refer to ordering scheme Electrical Life . . . . . . . . . . 1S1-Series: 30,000 make & break cycles @ full load 1SS & 1SM-Series: 50,000 make & break cycles @ full load Contact Resistance. . . . . . 20 mΩ max. initial @ 2-4 VDC 100mA for both silver & gold plated contacts. Insulation Resistance . . . 1000 MΩ min. Dielectric Strength . . . . . . 1500 Volts RMS @ sea level Operating Temperature . . . -30°C to +85°C Index of Protection . . . . . . 1SS & 1SM-Series: IP67 Solder Heat Resistance. . . MIL-STD-202, Method 210 Actuator Travel . . . . . . . . . 25° Materials 1SM-Series Sealed Surface Mount Sub-Miniature Rocker Switch Case . . . . . . . . . . . . . . . . all UL94 V-0 1S1-Series: Dially phthalate (DAP) 1SS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized 1SM-Series: Glass filled nylon 4/6, flame retardant, heat stabilized Rocker. . . . . . . . . . . . . . . 1S1-Series: Nylon (UL 94V-0) 1SS & 1SM-Series: Nylon, black standard, internal o-ring sealed Bushing . . . . . . . . . . . . . . 1S1-Series: Brass, nickel plated 1SS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) 1SM-Series: Glass filled nylon 4/6, flame retardant, heat stabilized (UL 94V-0) Housing. . . . . . . . . . . . . . .1S1-Series: Stainless Steel Switch Support . . . . . . . . . 1S1 & 1SM-Series: Brass, tin plated Terminal Seal . . . . . . . . . . Epoxy 1S1-Series Ordering Scheme 1S1 - MSP 1 - R2 / 2 M6 Q E 1 Series 2 Poles 3 Circuit 2 POLES MSP single pole - uses terminals 1, 2 & 3. MDP double pole uses terminals 1,2, 3, 4, 5 & 6. 3 CIRCUIT ( ) - momentary 1 2 3 4 5 OPEN NONE NONE OFF OFF OFF 2-1, 5-4 ON (ON) ON (ON) (ON) 5 ACTUATOR COLOR1 1 2 4 orange 5 yellow 6 green 6 Termination 7 Contact 8 Seal VS3 PC Mount, U bracket, .620 mounting x .630 high M61 Snap-In, U bracket, 90° horizontal M71 Snap-In, U bracket, 90° vertical VS21 Snap-In, U bracket 7 CONTACT Material Terminal Plating Rating G silver1 gold over silver3 3A@125VAC or 28VDC, 1.5A @ 250VAC 2 K gold tin-lead4 0.4VA max. @20V max (AC/DC) P silver1 tin-lead4 3A@125VAC or 28VDC, 1.5A @ 250VAC 1 1 Q silver silver 3A@125VAC or 28VDC, 1.5A @ 250VAC R gold2 gold2 0.4VA max. @20V max (AC/DC) Approvals UL CSA – UL CSA UL CSA – NOTE: Tin-lead option available with PC type terminations only. 1 Moveable contact & terminals: copper alloy, silver plated 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plated with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 4 ACTUATOR STYLE R1 Small rocker R2 Narrow black rocker 1 white 2 black 3 red 5 Actuator Color 6 TERMINATION M1 Solder Lug M2 PCB M6 PC Mount, 90° horizontal M7 PC Mount, 90° vertical VS2 PC Mount, U bracket, .620 mounting x .460 high 1 SERIES 1S1 Sub-Miniature Rocker Switch Switching Position: 2-3, 5-6 ON ON ON (ON) ON 4 Actuator Style 7 blue 8 brown 9 gray 8 EPOXY SEAL E epoxy seal Black, white and red are standard. Other colors available, consult factory. www.carlingtech.com Carling Technologies 1S-Series Sub-Miniature Rocker Switches ™ 1SS-Series Ordering Scheme 1SS - WMSP 1 - R2 / 2 - M2 G E 1 Series 2 Poles 3 Circuit 5 Actuator Color 6 Termination 7 Contact 8 Seal 6 TERMINATION M1 Solder Lug M2 PCB M6 PC Mount, 90° horizontal M7 PC Mount, 90° vertical VS2 PC Mount, U bracket, .620 mounting x .460 high M61 Snap-In, U bracket, 90° horizontal M71 Snap-In, U bracket, 90° vertical VS21 Snap-In, U bracket, .620 mounting x .460 high 1 SERIES 1SS Sealed Sub-Miniature Rocker Switch 2 POLES WMSP WMDP 4 Actuator Style single pole - uses terminals 1, 2 & 3. double pole uses terminals 1, 2, 3, 4, 5 & 6. 3 CIRCUIT ( ) - momentary Switching Position: 2-3, 5-6 ON ON ON (ON) ON 1 2 3 4 5 OPEN NONE NONE OFF OFF OFF 4 ACTUATOR STYLE R1 Small rocker 2-1, 5-4 ON (ON) ON (ON) (ON) R2 Narrow rocker 5 ACTUATOR COLOR1 1 white 2 black 3 red 1 4 orange 5 yellow 6 green 7 blue 8 brown 9 gray 7 CONTACT Material Terminal Plating Rating gold over silver3 3A@125VAC or 28VDC, G silver1 1.5A @ 250VAC 2 K gold tin-lead4 0.4VA max. @20V max (AC/DC) P silver1 tin-lead4 3A@125VAC or 28VDC, 1.5A @ 250VAC 2 2 R gold gold 0.4VA max. @20V max (AC/DC) IP67 IP67 IP67 IP67 NOTE: Standard G plating for sealed product. Tin-lead option available with PC type terminations only. 1 Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plated over nickel plate 3 Terminals: silver plated with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate White, black & red are standard. Other colors available for quantities of 5K or more. 8 EPOXY SEAL E epoxy seal 1SM-Series Ordering Scheme 1SM - WMSP 1 - R2 - M6 G E 1 Series 2 Poles 3 Circuit 1 SERIES 1SM Sealed Surface Mount Sub-Miniature Rocker Switch 2 POLES WMSP single pole - uses terminals 1, 2 & 3. 3 CIRCUIT ( ) - momentary 1 2 3 4 5 Switching Position: 2-3 ON ON ON (ON) ON 4 ACTUATOR STYLE R2 Narrow black rocker OPEN NONE NONE OFF OFF OFF 2-1 ON (ON) ON (ON) (ON) 4 Actuator Style 5 Termination 6 Contact 7 Seal 8 Packaging 5 TERMINATION M6 Surface Mount, 90° flat - horizontal/side terms S6 Surface Mount, 90° horizontal/back terms S7 Surface Mount, 90° vertical 6 CONTACT Material Terminal Plating Rating G silver1 gold over silver 3 3A@125VAC or 28VDC, 1.5A @ 250VAC K gold2 tin-lead4 0.4VA max. @20V max (AC/DC) 1 4 tin-lead 3A@125VAC or 28VDC, P silver 1.5A @ 250VAC Q silver1 silver1 3A@125VAC or 28VDC, 1.5A @ 250VAC 2 2 R gold gold 0.4VA max. @20V max (AC/DC) IP67 IP67 IP67 IP67 IP67 NOTE: Standard G plating for sealed product. P&K for PC mount only. Tin-lead option available with PC type terminations only. 1 Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plated with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 7 EPOXY SEAL E epoxy seal 8 PACKAGING Switches are bulk packed, unless T/R is specified at the end of the part number. T/R tape reel - 500 pieces per reel www.carlingtech.com 3 Carling Technologies 1S-Series Sub-Miniature Rocker Switches ™ 1S-Series Dimensional Specifications: in. [mm] ACTUATOR 1S1 R1 R2 Rocker .311 [7.90] .480 [12.20] .256 [6.50] R1 .256 [6.50] .476 [12.10] .352 [8.95] .587 [14.90] .185 [4.70] .250 [6.35] Narrow Rocker .299 [7.60] .250 [6.35] .158 [4.00] .579 [14.70] SINGLE POLE .311 [7.90] .317 [8.05] .158 [4.00] 0.20 [0.50] 1.095 [27.80] .201 [5.10] EPOXY SEAL .366 [9.30] 0.20 [0.50] 25.0° .845 [21.45] .311 [7.90] .181 [4.60] .579 [14.70] .228 [5.80] .476 [12.10] .311 [7.90] .185 [4.70] R2 1SS & 1SM Rocker .236 [6.00] .480 [12.20] .352 [8.95] .587 [14.90] 1SS Narrow Rocker .319 [8.10] .100 [2.54] .016 [0.40] .122 [3.10] .138 [3.50] .100 [2.54] .030 [0.76] .118 [3.00] .252 [6.40] SINGLE POLE DOUBLE POLE .201 [5.10] DOUBLE POLE .358 [9.10] .319 [8.10] .362 [9.20] EPOXY SEAL .354 [9.00] 0.20 [0.50] .327 [8.30] .319 [8.10] .061 [1.55] .061 [1.55] .120 [3.05] .138 [3.50] .100 [2.54] .200 [5.08] .030 [0.76] TERMINATION SINGLE POLE M2 M1 Standard Solder Lug .059 [1.50] .130 [3.30] SINGLE POLE 4 .200 [5.08] .059 [1.50] .039 [1.00] .061 [1.55] .319 [8.10] .200 [5.08] .034 [0.85] .020 [0.50] .100 [2.54] .039 [1.00] .158 [4.00] .130 [3.30] .030 [0.76] .100 [2.54] .362 [9.20] www.carlingtech.com .100 [2.54] .034 [0.85] .200 [5.08] PC MOUNTING .327 [8.30] .043 DIA [Ø 1.09] .200 [5.08] .043 DIA [Ø 1.09] .020 [0.50] Thk. EPOXY SEAL .016 [0.40] .100 [2.54] .200 [5.08] DOUBLE POLE .100 [2.54] .200 [5.08] PC MOUNTING PCB .118 [3.00] .028 [0.70] .158 [4.00] .020 [0.50] Thk. PC MOUNTING .201 [5.10] .016 [0.40] .043 DIA [Ø 1.09] .020 [0.50] Thk. EPOXY SEAL DOUBLE POLE M2 Standard Solder Lug .100 [2.54] .030 [0.76] .061 [1.55] .020 [0.50] Thk. M6 M1 PCB .039 [1.00] .039 .118 [1.00] [3.00] .158 [4.00] .028 [0.70] PC MOUNTING .020 [0.50] .100 [2.54] .200 [5.08] .100 [2.54] .200 [5.08] .043 DIA [Ø 1.09] Carling Technologies 1S-Series Sub-Miniature Rocker Switches ™ 1S-Series Dimensional Specifications: in. [mm] TERMINATION M7 SINGLE POLE DOUBLE POLE PC MOUNTING .201 [5.10] PC MOUNTING .358 [9.10] .020 [0.50] .100 [2.54] .100 [2.54] .319 [8.10] .043 DIA [Ø 1.09] .319 [8.10] .200 [5.08] .200 [5.08] .043 DIA [Ø 1.09] .016 [0.40] .200 [5.08] .030 [0.76] VS2 PC MOUNTING .100 [2.54] .200 [5.08] VS3 SINGLE POLE .043 DIA [Ø 1.09] .350 [8.90] .043 DIA [Ø 1.09] .100 [2.54] .016 [0.40] .100 [2.54] .030 [0.76] PC MOUNTING .020 [0.50] .400 [10.16] .100 [2.54] .400 [10.16] .358 [9.10] .400 [10.16] VS2 .130 [3.30] .200 [5.08] .200 [5.08] .030 [0.76] .315 [8.00] DOUBLE POLE PC MOUNTING VS3 .311 [7.90] .311 [7.90] .043 DIA [Ø 1.09] .100 [2.54] .043 DIA [Ø 1.09] .400 [10.16] .350 [8.90] .130 [3.30] .200 [5.08] PC MOUNTING .311 [7.90] .311 [7.90] .130 [3.30] .200 [5.08] .200 [5.08] .030 [0.76] .401 [10.18] .200 [5.08] .030 [0.76] .016 [0.40] .100 [2.54] .020 [0.50] .400 [10.16] .100 [2.54] .400 [10.16] .358 [9.10] .200 [5.08] .130 [3.30] .200 [5.08] .030 [0.76] .315 [8.00] SNAP-IN TERMINATION M61 M71 www.carlingtech.com VS21 5 Carling Technologies 1S-Series Sub-Miniature Rocker Switches ™ 1SM-Series Dimensional Specifications: in. [mm] TERMINATION M6 PC MOUNTING .100 [2.54] EPOXY SEAL .143 [3.63] .020 [0.50] .090 [2.29] .016 [0.40] .142 [3.60] .028 [0.70] .286 [7.27] .128 [3.25] .080 [2.03] .393 [9.98] .030 [0.75] .040 [1.02] .140 [3.56] .357 [9.07] .150 [3.81] .080 [2.03] .040 [1.02] S6 PC MOUNTING .100 [2.54] EPOXY SEAL .016 [0.40] .142 [3.60] .028 [0.70] .040 [1.02] .140 [3.56] .080 [2.03] .020 [0.50] .030 [0.75] .353 [8.97] .143 [3.63] .079 [2.00] .100 [2.54] EPOXY SEAL S7 .032 [0.80] .561 [14.25] .125 [3.18] .095 [2.40] .1.00 [2.54] .030 [0.76] .100 [2.54] .079 [2.00] .221 [5.60] .118 [3.00] .028 [0.70] .125 [3.18] .100 [2.54] .326 [8.27] REEL TAPING .610 [15.50] .079 [2.00] .158 [4.00] .061 DIA [Ø 1.55] .014 [0.35] .079 DIA [Ø 2.00] .543 [13.80] 1.260 [32.00] .787 [20.00] 1.118 [28.40] .354 [9.00] .110 [2.80] .354 [9.00] .441 [11.20] .787 [20.00] .260 [6.60] .015 R [0.38 R] .268 [6.80] FOR M6,S6 ONLY .079 [2.00] .158 [4.00] .059 DIA [Ø 1.50] .020 [0.50] .079 DIA [Ø 2.00] 0.69 [1.75] 3.0° .795 [20.20] 1.732 [44.00] 1.043 [26.50] 1.591 [40.40] .012 R [0.30 R] .650 [16.50] .079 DIA [Ø 2.00] 30.0° 30.0° .630 [16.00] .197 [5.00] 6 .197 [5.00] .248 [6.30] .488 [12.40] .591 [15.00] FOR S7 ONLY www.carlingtech.com .421 [10.70] PC MOUNTING .173 [4.39] .020 [0.50] .128 [3.25] .063 [1.60]