10Base-T Interface Module ELECTRONICS INC. EPE6152M • Recommended for AMD MACE Chips • General Purpose 10 Base-T Filter Module • Robust construction allows for IR/VP processes • Complies with or exceeds IEEE 802.3, 10Base-T Standards • Available in SMD, DIP, DIL, and SIP Packages (Pin-outs may vary) Electrical Parameters @ 25° C Cut-Off Frequency (MHz) Insertion Loss (dB Max.) Return Loss (dB Min.) ± 1.0 MHz Xmit/Rcv 1-10 MHz 5-10 MHz @ 20 MHz @ 25 MHz @ 30 MHz @ 40 MHz @ 50 MHz @ 100 MHz @ 200 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 17/17 -1/-1 -15/-15 -7/-5 -18/-11 -30/-18 -35/-26 -45/-40 -30/-30 -20/-20 • Attenuation (dB Min.) Common Mode Rejection (dB Min.) Crosstalk (dB Min.) 1-10 MHz -35 Isolation : meets or exceeds 802.3 IEEE Requirements • Characteristic Filter Impedance : 100 Ω • • Insertion Loss : Referenced @ 5 MHz • Schematic Transmit Channel Receive Channel 5 1 100Ω 2 LPF 1:1 9 3 100Ω 100Ω 10 4 7 100Ω LPF 1:1 8 Package 1.040 (26.42) 3.00 (7.62) Pin 1 I.D. .420 (10.67) .070 (1.78) PCA EPE6152M Date Code .100 (2.54) .900 (22.86) .120 (3.05) .020/.030 (.508/.762) .016/.022 (.406/.559) .010 (.254) .150 (3.81) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6152M Rev. 2 5/6/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com