10Base-T Interface Filter Module with Resistor Network ELECTRONICS INC. EPE6135 • General Purposes Filter Module • Robust construction allows for toughest reflow processing • Complies with or exceeds IEEE 802.3, 10Base-T Standards Electrical Parameters @ 25° C Cut-Off Frequency (MHz) Insertion Loss (dB Max.) Return Loss (dB Min.) ± 1.0 MHz Xmit/Rcv 1-10 MHz 5-10 MHz @ 20 MHz @ 25 MHz @ 30 MHz @ 40 MHz 10-100 MHz 100-300 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv --- 18/17.5 -5/-4.5 -15/-15 -8/-8 -16/-16 -25/-25 -33/-33 -40/-45 -25/-20 -35 • Attenuation (dB Min.) Common Mode Rejection (dB Min.) Isolation : Meets or exceeds 802.3 IEEE Requirements • Crosstalk (dB Min.) 1-10 MHz Crosstalk : Between Channels • Schematic 1 2 62 Ω 4 62 Ω Receive Channel 16 261 Ω 2.4K Ω 3 Transmit Channel 51 Ω 8 LPF 9 LPF 12/15 6 7 261 Ω 11 51 Ω 1:1 1:1 10 14 5 Package .910 Max. (23.11) Pin 1 I.D. PCA EPE6135 Date Code .450 Max. (11.43) .410 Max. (9.65) .020 (.508) .100 (2.54) .018 x .012 (.457 x .305) .120 Min. (3.05) .300 (7.62) .700 (17.78) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6135 Rev. 1 4/21/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com