ALUMINUM ELECTROLYTIC CAPACITORS QS Snap-in Terminal type, 105°C High speed charge-discharge. series Suited for high frequency regenerative voltage for AC servomotor, general inverter. Suited for equipment used at valtage fluctuating area. Suited for rectifier circuit of voltage doubler Compliant to the RoHS directive (2002/95/EC). QS Hi speed chargedischarge GU Specifications Item Performance Characteristics Category Temperature Range – 25 to +105°C Rated Voltage Range 350 to 450V Rated Capacitance Range 82 to 820µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current I 3 CV(µA) (After 5 minutes' application of rated voltage [C : Rated Capacitance(µF), V : Voltage ( V ) ] Measurement frequency : 120Hz, Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 350 0.15 Rated voltage (V) Stability at Low Temperature Impedance ratio ZT/Z20(MAX.) 400 0.15 Temperature : 20°C 420 0.15 450 0.20 Measurement frequency : 120Hz 350 to 450 Z – 25°C / Z+20°C 8 Capacitance change tan δ Leakage current Appearance Endurance of chargedischarge behavior After an application of charge-discharge voltage for 50million times (charge-discharge voltage difference(∆V) = rated voltage × 0.35, cycle 6Hz) capacitors shell meet the characteristics requirement listed at right. Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Within ±20% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value There shell be found to remarkable abnormality on the capacitor Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, Shelf Life they shall meet the specified value for endurance characteristics listed above. Printed with white color letter on black sleeve. Marking Type numbering system (Example : 400V 180µF) Drawing 1 Sleeve (P.E.T.) L QS 2 G 1 8 1 ME L A 3 0 φD +1.5MAX. Polarity bar 2 3 4 5 6 7 8 9 10 11 12 13 14 Case length code Case dia. code Configuration 10 L±2 Capacitance tolerance (±20%) Rated capacitance (180µF) 4.0±0.5 Rated voltage (400V) Pressure relief vent 0.8 0.8 .2 +0 .1 -0 Type 4.0±0.5 Please contact to us if other configurations are required. 2.5 0.1 Code Z A B C Series name +0.2 -0.1 10 ± φD 22 25 30 35 2-2φ±0.1 1.5 +0.2 -0.1 (PC board hole dimensions) (Terminal dimensions) The other terminal is also available upon request. Please refer page 272 for schematic of dimensions. Minimum order quantity : 50pcs. Dimension table in next page. CAT.8100Z ALUMINUM ELECTROLYTIC CAPACITORS QS series Dimensions 400V (2G) 350V (2V) Size φD × L(mm) Rated ripple Leakage Current (mA) (mA) 22 × 25 22 × 30 750 0.61 LQS2V121MELZ25 100 820 0.68 LQS2V151MELZ30 120 180 22 × 30 25 × 25 900 0.75 LQS2V181MELZ30 150 900 0.75 LQS2V181MELA25 220 22 × 35 25 × 30 1000 0.83 LQS2V221MELZ35 1000 0.83 LQS2V221MELA30 22 × 40 25 × 35 1100 0.92 LQS2V271MELZ40 1100 0.92 LQS2V271MELA35 30 × 25 22 × 45 1100 0.92 LQS2V271MELB25 1200 1.01 LQS2V331MELZ45 25 × 40 30 × 30 1200 1.01 LQS2V331MELA40 1200 1.01 LQS2V331MELB30 25 × 45 30 × 35 1300 1.10 LQS2V391MELA45 1300 1.10 LQS2V391MELB35 25 × 50 30 × 40 1400 1.21 LQS2V471MELA50 1400 1.21 LQS2V471MELB40 35 × 30 30 × 45 1400 1.21 LQS2V471MELC30 1500 1.32 LQS2V561MELB45 35 × 35 30 × 50 1500 1.32 LQS2V561MELC35 1700 1.46 LQS2V681MELB50 35 × 40 35 × 45 1700 1900 1.46 1.60 LQS2V681MELC40 LQS2V821MELC45 Cap. (µF) 120 150 270 330 390 470 560 680 820 Code 420V (W6) Leakage Current Size φD × L(mm) Rated ripple (mA) (mA) 22 × 25 22 × 30 660 0.61 LQSW6101MELZ25 810 0.67 LQSW6121MELZ30 25 × 25 22 × 35 810 0.67 LQSW6121MELA25 840 0.75 LQSW6151MELZ35 25 × 30 22 × 40 840 0.75 LQSW6151MELA30 910 0.82 LQSW6181MELZ40 25 × 30 30 × 25 910 0.82 LQSW6181MELA30 910 0.82 LQSW6181MELB25 22 × 45 25 × 35 1050 0.91 LQSW6221MELZ45 1050 0.91 LQSW6221MELA35 30 × 30 25 × 40 1050 0.91 LQSW6221MELB30 1250 1.01 LQSW6271MELA40 30 × 30 35 × 25 1250 1.01 LQSW6271MELB30 1250 1.01 LQSW6271MELC25 25 × 50 30 × 35 1420 1.11 LQSW6331MELA50 1420 1.11 LQSW6331MELB35 35 × 30 30 × 40 1420 1.11 LQSW6331MELC30 1610 1.21 LQSW6391MELB40 35 × 35 30 × 45 1610 1.21 LQSW6391MELC35 1860 1.33 LQSW6471MELB45 1860 1.33 LQSW6471MELC40 560 35 × 40 35 × 45 2100 1.45 LQSW6561MELC45 680 35 × 50 2200 1.60 LQSW6681MELC50 Cap. (µF) 100 120 150 180 220 270 330 390 470 Size φD × L(mm) Rated ripple Leakage Current (mA) (mA) 22 × 25 22 × 30 680 0.60 LQS2G101MELZ25 730 0.65 LQS2G121MELZ30 22 × 35 22 × 35 850 0.73 LQS2G151MELZ35 950 0.80 LQS2G181MELZ35 25 × 30 30 × 25 950 0.80 LQS2G181MELA30 950 0.80 LQS2G181MELB25 22 × 45 25 × 35 1100 0.88 LQS2G221MELZ45 1100 0.88 LQS2G221MELA35 30 × 25 22 × 50 1100 0.88 LQS2G221MELB25 1220 0.98 LQS2G271MELZ50 25 × 40 30 × 30 1220 0.98 LQS2G271MELA40 1220 0.98 LQS2G271MELB30 35 × 25 25 × 45 1220 0.98 LQS2G271MELC25 1440 1.08 LQS2G331MELA45 30 × 35 25 × 50 1440 1.08 LQS2G331MELB35 1550 1.18 LQS2G391MELA50 30 × 40 35 × 30 1550 1.18 LQS2G391MELB40 1550 1.18 LQS2G391MELC30 470 30 × 45 35 × 35 1680 1.30 LQS2G471MELB45 1680 1.30 LQS2G471MELC35 560 30 × 50 35 × 40 1900 1.41 LQS2G561MELB50 1900 1.41 LQS2G561MELC40 680 35 × 45 2120 1.56 LQS2G681MELC45 Cap. (µF) Size φD × L(mm) Rated ripple (mA) (mA) 22 × 25 22 × 30 640 0.57 690 0.63 LQS2W101MELZ30 25 × 25 22 × 35 690 0.63 LQS2W101MELA25 720 0.69 LQS2W121MELZ35 25 × 30 22 × 40 720 0.69 LQS2W121MELA30 790 0.77 LQS2W151MELZ40 25 × 30 30 × 25 790 0.77 LQS2W151MELA30 790 0.77 LQS2W151MELB25 22 × 45 25 × 35 870 0.85 LQS2W181MELZ45 870 0.85 LQS2W181MELA35 Cap. (µF) Code 180 220 270 330 390 82 100 120 150 180 30 × 30 25 × 40 450V (2W) Leakage Current Code Code LQS2W820MELZ25 870 0.85 LQS2W181MELB30 1050 0.94 LQS2W221MELA40 30 × 30 35 × 25 1050 0.94 LQS2W221MELB30 1050 0.94 LQS2W221MELC25 25 × 50 30 × 35 1230 1.04 LQS2W271MELA50 1230 1.04 LQS2W271MELB35 35 × 30 30 × 40 1230 1.04 LQS2W271MELC30 1380 1.15 LQS2W331MELB40 35 × 35 30 × 50 1380 1.15 LQS2W331MELC35 1610 1.25 LQS2W391MELB50 1610 1.25 LQS2W391MELC40 470 35 × 40 35 × 45 1780 1.37 LQS2W471MELC45 560 35 × 50 1990 1.50 LQS2W561MELC50 220 270 330 390 Rated ripple current (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) Coefficient 50 0.77 60 0.82 120 1.00 300 1.16 1k 1.30 10k 1.41 50k or more 1.43 CAT.8100Z