ALUMINUM ELECTROLYTIC CAPACITORS GJ Snap-in Terminal Type, 105°C Low-Profile Sized GU series Low Profile Withstanding 3000 hours application of rated ripple current at 105°C. Ideally suited for flat design fo switching power supply. Addition of 450V rated voltage. Compliant to the RoHS directive (2011/65/EU). GJ Low Profile GJ(15) Specifications Performance Characteristics Item Category Temperature Range – 40 to +105°C (200 Rated Voltage Range 200 to 450V Rated Capacitance Range 47 to 680µF Capacitance Tolerance 3± 20% CV at 120Hz, 20°C Leakage Current 250V) , – 25 to +105°C (400 450V) 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] 3 CV 200 to 400 0.15 Rated voltage(V) Tangent of loss angle (tan δ) tan δ (MAX.) Measurement frequency : 120Hz at 20°C 450 0.20 Measurement frequency : 120Hz 200 • 250 3 12 Rated voltage(V) Z – 25°C/ Z+20°C Impedance ratio ZT/Z20(MAX.) Z – 40°C/ Z+20°C Stability at Low Temperature 400 • 450 8 — Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right. Capacitance change tan δ Leakage current Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value Marking Printed with white color letter on black sleeve. Since rating other than the above can be manufactured a please ask for detail. Type numbering system (Example : 400V 120µF) Drawing 1 2 3 1 2 3 Polarity bar (P.E.T. ) Polarity Sleeve bar Sleeve (P.E.T.) φD +1.5MAX. φD +1.5MAX. 10 ± 0. 10 ± 1 0 +0.2 0.8 -0.1 +0.2 0.8 -0.1 2-2 φ ± 0.1 2-2 φ ± 0.1 4.0±0.5 4.0±0.5 10 10 20±2 20±2 4.0±0.5 Pressure relief vent 4.0±0.5 Pressure relief vent (PC board hole dimensions) (PC board hole dimensions) .2 +0 .1 -0 0.8+0.21 -0. 0.8 5 6 7 8 9 10 11 12 13 14 Configuration CapacitanceConfiguration tolerance (±20%) Capacitance tolerance (±20%) Rated capacitance (120µF) Rated capacitance (120µF) Rated voltage (400V) 2.52.5 .1 4 9 10 11 12 L G J 42 5G 61 72 81 M E L B 132 140 LG J 2 G 1 2 1 ME L B 2 0 Rated voltage (400V) Series name +0.2 1.5 -0.1 +0.2 1.5 -0.1 dimensions) (Terminal (Terminal dimensions) Series name Type Type Size code Size code Case dia. code Case dia. code φD Code φD Code 20 Y 20 YZ 22 22 ZA 25 25 AB 30 30 BC 35 35 C The other terminal is also available upon request. Please refer to page 326 available for schematic terminal dimensions. The other terminal is also uponofrequest. Please refer to page 272 for schematic of terminal dimensions. Frequency coefficient of rated ripple current 50 Frequency (Hz) 200 to 250V 0.81 400 to 450V 0.77 Minimum order quantity : 50pcs. Coeff. 60 0.85 0.82 Dimension table in next page. 120 1.00 1.00 300 1.17 1.16 1 k 1.32 1.30 10k 1.45 1.41 50k or more 1.50 1.43 CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS GJ series Dimensions 200V(2D) Cap. (µF) Size φD × L(mm) 250V(2E) Rated ripple Leakage Current (mA) (mA) Code Cap. (µF) Size φD × L(mm) Rated ripple Leakage Current (mA) (mA) Code 180 20 × 20 680 0.56 LGJ2D181MELY20 150 20 × 20 660 0.58 220 22 × 20 760 0.62 LGJ2D221MELZ20 180 22 × 20 750 0.63 LGJ2E181MELZ20 270 22 × 20 780 0.69 LGJ2D271MELZ20 220 25 × 20 920 0.70 LGJ2E221MELA20 330 25 × 20 960 0.77 LGJ2D331MELA20 270 30 × 20 1040 0.77 LGJ2E271MELB20 390 30 × 20 1080 0.83 LGJ2D391MELB20 330 30 × 20 1080 0.86 LGJ2E331MELB20 470 30 × 20 1120 0.91 LGJ2D471MELB20 390 35 × 20 1410 0.93 LGJ2E391MELC20 560 35 × 20 1440 1.00 LGJ2D561MELC20 470 35 × 20 1470 1.02 LGJ2E471MELC20 680 35 × 20 1520 1.10 LGJ2D681MELC20 400V(2G) Cap. (µF) Size φD × L(mm) LGJ2E151MELY20 450V(2W) Rated ripple Leakage Current (mA) (mA) 56 20 × 20 550 0.44 68 22 × 20 620 82 25 × 20 700 100 25 × 20 120 30 × 20 150 30 × 20 180 220 Cap. (µF) Code Size φD × L(mm) Rated ripple Leakage Current (mA) (mA) Code LGJ2G560MELY20 47 20 × 20 520 0.43 LGJ2W470MELY20 0.49 LGJ2G680MELZ20 56 22 × 20 600 0.47 LGJ2W560MELZ20 0.54 LGJ2G820MELA20 68 25 × 20 670 0.52 LGJ2W680MELA20 760 0.60 LGJ2G101MELA20 82 25 × 20 740 0.57 LGJ2W820MELA20 860 0.65 LGJ2G121MELB20 100 30 × 20 830 0.63 LGJ2W101MELB20 900 0.73 LGJ2G151MELB20 120 30 × 20 870 0.69 LGJ2W121MELB20 35 × 20 1160 0.80 LGJ2G181MELC20 150 35 × 20 1170 0.77 LGJ2W151MELC20 35 × 20 1210 0.88 LGJ2G221MELC20 Rated ripple current (mArms) at 105°C 120Hz CAT.8100D