ALUMINUM ELECTROLYTIC CAPACITORS VX Standard, For General Purposes - Axial Lead Type (02 type) series (Through 100V only) Axial lead type of standard series for general purposes. Compliant to the RoHS directive (2011/65/EU). Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C (6.3 to 250V), –25 to +85°C (315 to 450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 0.47 to 10000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Rated voltage (V) Leakage Current 6.3 to 100 160 to 450 In case of CV 1000 After 1 minute's application of rated voltage at 20°C, not more than 0.1CV+40 (µA) . In case of CV > 1000 After 1 minute's application of rated voltage at 20°C, not more than 0.04CV+100 (µA) . After 1 minute's application of rated voltage at 20°C, not more than 0.03CV or 4 (µA) , whichever is greater. Leakage current After 2 minutes' application of rated voltage at 20°C, not more than 0.01CV or 3 (µA) , whichever is greater. Measurement frequency : 120Hz at 20°C Rated voltage (V) Tangent of loss angle (tan δ) 6.3 0.24 tan δ (MAX.) 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 to 100 160 to 315 350 to 450 0.08 0.20 0.25 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz Rated voltage (V) Z–25°C / Z+20°C Impedance rat io ZT / Z20 (MAX.) Z–40°C / Z+20°C Stability at Low Temperature 6.3 4 10 10 3 8 16 2 6 25 2 4 35 to 100 160 to 250 315 · 350 400 · 450 2 4 6 15 3 12 — — Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic requirements at right. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Marking Printed with white color letter on purple blue sleeve. Axial Lead Type Type numbering system (Example : 10V 330µF) 1 3 4 5 6 7 8 9 10 11 φd + (φ10up) 0.5MAX +0.5MAX φD φD Sleeve (P.E.T.) Sealing rubber packing Sleeve (P.E.T.) Sealing rubber packing 2 10 11 T1 V2 X3 14 A5 36 37 18 M9 A D T V X 1 A 3 3 1 MAD Pressure relief vent (φ10up) relief vent Pressure φd L+ L+ 35MIN 35MIN MAX Rated capacitance (330µF) Rated voltage (10V) Rated Series voltagename (10V) 35MIN MAX Series name Type 35MIN (mm) (φD < 10) 1 α (φD 10) 2 φD φd Configuration Configuration Capacitance tolerance (±20%) Capacitance tolerance (±20%) Rated capacitance (330µF) 5 to 13 16 to 18 0.6 0.8 Configuration Configuration Pb-free leadwire φD Pb-free PET sleeve Pb-free leadwire Pb-free PET 5 φtoD8 AD sleeve to 18 8 105 to 10 to 18 Type AD CD CD Please refer to page 22 about the taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS VX (02 type) series Dimensions 6.3 0J V Cap.(µF) Code 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 472 682 103 5 × 12 6.3 × 16 6.3 × 16 8 × 16 10 × 21 13 × 26 13 × 26 16 × 31.5 16 × 31.5 16 × 41.5 25 1E 010 2R2 3R3 4R7 100 220 330 470 101 5 × 12 6.3 × 16 8 × 16 8 × 16 8 × 20 10 × 26 13 × 31.5 16 × 31.5 16 × 41.5 18 × 41 110 6.3 × 12 130 200 6.3 × 16 210 250 8 × 16 300 330 8 × 16 350 600 10 × 21 640 1020 13 × 26 1090 1200 13 × 31.5 1390 1500 16 × 31.5 1730 1840 16 × 41.5 1930 2260 18 × 41 2350 160 2C 6.3 × 12 6.3 × 16 8 × 16 8 × 16 8 × 20 10 × 26 13 × 26 13 × 31.5 16 × 41.5 Code 1 2.2 3.3 4.7 10 22 33 47 100 16 1C 35 1V V Cap.(µF) 10 1A 13 23 33 39 60 120 170 230 430 200 2D 6.3 × 12 6.3 × 16 8 × 16 8 × 16 10 × 21 13 × 26 13 × 26 13 × 31.5 16 × 41.5 13 23 33 39 70 140 170 230 430 5 × 12 80 85 6.3 × 12 100 160 6.3 × 16 170 260 8 × 16 280 320 8 × 20 380 430 10 × 26 510 770 13 × 26 900 1180 16 × 31.5 1480 1620 16 × 41.5 1710 1840 18 × 41 2170 2310 250 2E 6.3 × 16 8 × 16 8 × 16 8 × 20 10 × 21 13 × 26 13 × 31.5 16 × 31.5 16 × 41.5 14 27 33 45 70 140 190 260 430 5 × 12 70 6.3 × 12 90 6.3 × 16 120 8 × 16 210 8 × 20 340 10 × 21 460 10 × 26 610 13 × 31.5 1060 16 × 31.5 1580 16 × 41.5 2050 315 2F 6.3 × 16 8 × 16 8 × 20 8 × 20 10 × 26 13 × 31.5 16 × 31.5 16 × 31.5 14 27 36 45 80 150 210 260 50 1H 5 × 12 5 5 × 12 10 5 × 12 23 5 × 12 28 5 × 12 34 5 × 12 50 6.3 × 12 85 6.3 × 16 110 6.3 × 16 130 8 × 16 220 10 × 21 410 10 × 26 560 13 × 26 730 16 × 31.5 1260 18 × 41 1920 350 2V 6.3 × 16 8 × 16 8 × 20 10 × 21 13 × 26 13 × 31.5 16 × 31.5 16 × 41.5 12 24 32 46 85 140 190 260 63 1J 5 × 12 55 6.3 × 12 90 6.3 × 16 120 8 × 16 160 8 × 20 260 10 × 26 480 13 × 26 650 13 × 31.5 840 16 × 31.5 1330 400 2G 8 × 16 8 × 20 10 × 21 10 × 21 13 × 26 16 × 31.5 16 × 41.5 18 × 41 14 28 38 46 85 150 210 290 100 2A 5 × 12 5 × 12 5 × 12 5 × 12 5 × 12 6.3 × 12 8 × 16 8 × 16 8 × 20 10 × 26 13 × 26 13 × 31.5 16 × 31.5 450 2W 8 × 16 10 × 21 10 × 21 10 × 26 13 × 26 16 × 31.5 18 × 41 10 18 28 34 40 60 120 150 190 340 560 750 970 14 31 38 50 85 150 230 Case size Rated φ D × L (mm) ripple Rated ripple current (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current V Cap.(µF) Frequency 0.47 to 47 6.3 to 100 100 to 470 1000 to 10000 160 to 450 1 to 100 120 Hz 300 Hz 1kHz 10kHz or more 1.00 1.35 1.57 2.00 1.00 1.23 1.34 1.50 1.00 1.10 1.13 1.15 1.00 1.25 1.40 1.60 CAT.8100D