ALUMINUM ELECTROLYTIC CAPACITORS VP Bi-Polarized series Standard bi-polarized series for entertainment electronics. Compliant to the RoHS directive (2011/65/EU). EP Wide Temperature VP Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 100V Rated Capacitance Range 0.47 to 6800µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 5 minutes' application of rated voltage at 20°C, leakage current is not more than 0.03CV or 3 (µA), whichever is greater. Tangent of loss angle (tan δ) For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz at 20°C Rated voltage (V) 10 16 25 35 50 63 100 6.3 tan δ (MAX.) 0.24 0.22 0.20 0.16 0.14 0.12 0.10 0.26 Measurement frequency : 120Hz 6.3 4 10 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C Stability at Low Temperature The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C with the polarity inverted every 250 hours. Endurance Marking Radial Lead Type 35 2 4 50 2 4 Capacitance change tan δ Leakage current 63 2 3 100 2 3 Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value 1 φd 2 31 42 53 64 75 86 97 10 8 11 9 10 11 U V PU 1 VA P 41 7 A 04 M 7 D 0 D M DD P±0.5 Configuration Configuration P±0.5 φd φD+0.5 MAX φD+0.5 MAX (φ6.3up) (φ6.3up) 25 2 5 Type numbering system (Example : 10V 47µF) Sleeve (P.E.T.) Sleeve (P.E.T.) Pressure relief vent L+ 16 2 6 After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Pressure relief vent 10 3 8 Capacitance tolerancetolerance ( ±20%) ( ±20%) Capacitance Rated capacitance (47µF) (47µF) Rated capacitance Rated voltage Rated(10V) voltage (10V) MAX L+ MAX 15MIN 4MIN 15MIN Series name Series name 4MIN Type (mm) (L < 20) 1.5 (L < 20) 1.5φD (L > (L > = 20) 2.0 = 20) 2.0 P φd 86.3 10 8 12.5 5φD 6.35 10 16 12.5 1816 2.0P 2.5 2.0 3.5 2.5 5.0 3.5 5.0 5.0 7.5 5.0 7.5 7.5 0.5φd 0.5 0.5 0.6 0.5 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 (mm) 18 7.5 0.8 • Please refer to page 20 about the end seal configuration. Configuration Configuration φD 5 Pb-free leadwire Pb-free leadwire φD Pb-free PET sleeve Pb-free PET sleeve 5 6.3 6.3 8 · 10 8 · 10 12.5 to 1812.5 to 18 DD DD ED PD HD ED PD HD Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D Type ALUMINUM ELECTROLYTIC CAPACITORS VP series Dimensions V Cap. (µF) Code 6.3 10 16 25 35 50 63 0J 1A 1C 1E 1V 1H 1J 100 2A 0.47 R47 5 × 11 11 5 × 11 14 1 010 5 × 11 17 5 × 11 21 2.2 2R2 5 × 11 25 6.3 × 11 34 3.3 3R3 5 × 11 27 5 × 11 28 6.3 × 11 39 4.7 4R7 47 10 100 22 220 33 330 5 × 11 47 470 5 × 11 100 101 6.3 × 11 125 220 221 330 470 5 × 11 34 5 × 11 34 6.3 × 11 34 6.3 × 11 5 × 11 42 5 × 11 42 5 × 11 43 6.3 × 11 52 6.3 × 11 57 8 × 11.5 71 5 × 11 57 5 × 11 57 6.3 × 11 65 6.3 × 11 73 8 × 11.5 89 8 × 11.5 95 10 × 16 135 64 5 × 11 64 5 × 11 70 6.3 × 11 80 8 × 11.5 100 8 × 11.5 105 10 × 12.5 135 12.5 × 20 220 76 5 × 11 76 6.3 × 11 95 6.3 × 11 95 8 × 11.5 120 10 × 12.5 150 10 × 16 180 12.5 × 20 240 230 10 × 20 265 12.5 × 20 320 16 × 25 425 575 18 × 35.5 720 6.3 × 11 125 8 × 11.5 160 8 × 11.5 160 10 × 16 8 × 11.5 215 8 × 11.5 215 10 × 12.5 275 10 × 16 305 12.5 × 20 410 12.5 × 25 480 16 × 25 331 8 × 11.5 265 10 × 16 345 10 × 16 375 12.5 × 20 450 12.5 × 20 505 16 × 25 650 16 × 31.5 655 471 10 × 12.5 370 10 × 16 410 10 × 20 485 12.5 × 20 540 12.5 × 25 655 16 × 31.5 835 18 × 35.5 965 1000 102 10 × 20 650 12.5 × 20 720 12.5 × 25 855 16 × 25 2200 222 12.5 × 25 1160 16 × 25 1280 16 × 31.5 1510 18 × 35.5 1620 3300 332 16 × 25 1570 16 × 31.5 1690 18 × 35.5 1980 4700 472 16 × 31.5 2020 18 × 35.5 2160 6800 682 18 × 35.5 2600 950 16 × 31.5 1140 Case size Rated φD × L (mm) ripple Rated ripple current (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more 0.75 1.00 1.35 1.57 2.00 0100 to 4700 0.80 1.00 1.23 1.34 1.50 1000 to 6800 0.85 1.00 1.10 1.13 1.15 Cap.(µF) 0.47 to 47 CAT.8100D