ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " JD Screw Terminal Type, High Energy Density Type series High energy density. Suitable for electric power storage. Compliant to the RoHS directive (2011/65/EU). Specifications Item Performance Characteristics Category Temperature Range – 25 to + 60°C Rated Voltage Range 2.5V Rated Capacitance Range 1000 to 6000F Capacitance Tolerance ± 20% (20°C) Leakage Current 0.5C (mA) [C : Rated Capacitance (F)] (After 30 minutes' application of rated voltage : 2.5V) Stability at Temperature Capacitance (– 25°C) /Capacitance (+20°C) ×100 DCR* Refer to the table below. (20°C) *DC internal resistance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 60°C. Capacitance change Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after storing the capacitors under no load for 2000 hours at 60°C. Capacitance change Shelf Life Marking Printed with white color letter on black sleeve. See Note Drawing DCR(–25°C) / DCR (+20°C) 70% 7 DCR Leakage current DCR Leakage current Within ±30% of the initial capacitance value 300% or less than the initial value Less than or equal to the initial specified value Within ±30% of the initial capacitance value 300% or less than the initial value Less than or equal to the initial specified value Type numbering system (Example : 2.5V 1000F) φ 40 1 Hexagenal headed bolt Bottom plate Sleeve 2 3 4 5 6 7 8 9 Mounting bracket S T Series name Type Cr ( III) Plating (RoHS compliant) T SE P A±2 D +2MAX. W±1 S T P ±2 h Pressure relief vent U A ±2 H ±1 30° ±1 Dimensions 2.5V (0E) Cap. (F) 1000 1300 2300 2500 4000 6000 DCR Typical (mΩ) 108 138 238 258 408 608 8.0 6.0 4.0 3.5 2.2 2.2 Case size φ (mm) 40 51 63.5 76.2 L (mm) 105 135 135 142 150 165 Ref. Weight (g) 210 250 450 500 800 1300 Dimensions of terminal pitch(W) and length(R) and Normal dia. of bolt (mm) 40 51 63.5 76.2 Note : The capacitance calculated from discharge time (ΔT) with constant current ( i ) after 30minuite charge with rated voltage (2.5V). The discharge current ( i ) is 0.01 × rated capacitance (F). The discharge time (ΔT) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i × ΔT Dimensions of mounting bracket Cap. code The listed DCR value is typical and therefore not a guaranteed value. φD Code less 3-leg brackets BB 2-leg brackets No bracket BN Configuration Pressure relief vent Rated Voltage ( Code ) G H U S 0° 12 M6 L+α MAX. 63.5 76.2 P A±1 Hexagenal headed bolt Sleeve U B±1 θ° φ D +2MAX. W±1 Bottom plate + r±1 φ 51 and larger 12 13 14 Case dia. code(φ40) (φ40) Configuration φD Code Code less 2-leg brackets (±20%) Capacitance tolerance BN No brackets D 40 Rated capacitance (1000F) F (φ51,φ63.5 , φ76.2) 51 Rated voltage (2.5V) Pressure relief vent h H±0.5 L+αMAX. 10 11 J J D 0 E 1 0 8 M S E D M6(φ40) W 18.8 26.0 28.6 31.8 R 9 10 10 6 α 3 3 3 3 Nominal of bolt M6 M6 M6 M6 Leg shape Symbol P A B T S U θ° H h 3-Legs φD 51 63.5 76.2 40 32.5 38.1 44.5 27 38.5 43 49.2 32 – – – 48 7.5 8.0 7.0 7.0 5.0 5.0 5.0 3.5 12 14 14 10 60 60 60 45 20 25 30 17 15 20 24 12 (mm) 2-Legs 51 63.5 76.2 33.2 40.5 46.5 40 46.5 53 – – – .0 6 4.5 14 30 25 15 7.0 4.5 14 30 35 20 6.0 4.5 14 30 35 20 Note)The brackets will be supplied in the separate box. CAT.8100D