ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " JL Screw Terminal Type, High Power Density Type series High power density. Rapid charge-discharge. Suitable for regeneration and UPS applications. Compliant to the RoHS directive (2011/65/EU). Specifications Performance Characteristics Item Category Temperature Range – 25 to + 60°C Rated Voltage Range 2.5V Rated Capacitance Range 700 to 2600F Capacitance Tolerance ± 20% (20°C) Leakage Current 0.5C (mA) [C : Rated Capacitance (F)] (After 30 minutes' application of rated voltage : 2.5V) Stability at Low Temperature Capacitance (– 25°C) / Capacitance (+20°C) ×100 DCR* Refer to the table below. (20°C) Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 60°C. Capacitance change The specifications listed at right shall be met when the capacitors are restored to 20°C after storing the capacitors under no load for 2000 hours at 60°C. Shelf Life Marking See Note 70% DCR (–25°C) / DCR (+20°C) DCR Within ±30% of the initial capacitance value 300% or less than the initial value Leakage current Less than or equal to the initial specified value Capacitance change DCR Within ±30% of the initial capacitance value 300% or less than the initial value Leakage current Less than or equal to the initial specified value Printed with white color letter on black sleeve. Drawing Type numbering system (Example : 2.5V 700F) 1 φ 40 M6(φ40) Sleeve 2 3 4 5 6 7 8 9 U B±1 S θ° W±1 φ D+2MAX. + T P A ±1 r±1 MAX. φ 51 and larger Hexagenal headed bolt M6 Cr ( III) Plating (RoHS compliant) U S 0° 12 P D +2MAX. W ±1 L+ T P ±2 MAX. Pressure relief vent U A ±2 30° ±1 Dimensions Dimensions of mounting bracket Cap. code 707 857 158 178 268 DCR Typical (mΩ) 3.5 2.5 1.8 1.7 1.3 Case size φ D × L (mm) φ D L 40 51 63.5 105 135 135 142 150 Ref. Weight (g) 210 250 450 500 800 The listed DCR value is typical and therefore not a guaranteed value. Dimensions of terminal pitch(W) and length(R) and Normal dia. of bolt (mm) φD 40 51 63.5 (φ51,φ63.5) Code less 3-leg brackets BB 2-leg brackets No bracket BN S h H ±1 2.5V (0E) A±2 Pressure relief vent 700 850 1500 1700 2600 (φ40) Code less 2-leg brackets BN No brackets Note : The capacitance calculated from discharge time (ΔT) with constant current ( i ) after 30minuite charge with rated voltage (2.5V). The discharge current ( i ) is 0.01 × rated capacitance (F). The discharge time (ΔT) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i × ΔT SE T Sleeve Cap. (F) Mounting bracket Configuration h H±0.5 Bottom plate 12 13 14 Case dia. code(φ40) Configuration φD Code Capacitance tolerance (±20%) D 40 Rated capacitance (700F) F 51 Rated voltage (2.5V) 63.5 G Series name Type Pressure relief vent L+ 10 11 J J L 0 E 7 0 7 M S E D Hexagenal headed bolt Bottom plate Rated Voltage ( Code ) 7 *DC internal resistance W 18.8 26.0 28.6 R 9 10 10 α 3 3 3 Nominal of bolt M6 M6 M6 Leg shape Symbol P A B T S U θ° H h φD 3-Legs 63.5 51 38.1 32.5 43 38.5 – 7.5 5.0 12 60 20 15 – 8.0 5.0 14 60 25 20 40 27 32 48 7.0 3.5 10 45 17 12 2-Legs 51 33.2 40 – 6.0 4.5 14 30 25 15 (mm) 63.5 40.5 46.5 – 7.0 4.5 14 30 35 20 Note)The brackets will be supplied in the separate box. CAT.8100D