ALUMINUM ELECTROLYTIC CAPACITORS AR Snap-in Terminal Type, 105°C Permissible Overvoltage series Withstanding 2000 hours application of rated ripple current at 105°C. Reduction of short incidence when overvoltage (rated voltage x 1.5) is applied to a capacitor. Compliant to the RoHS directive (2011/65/EU). AR Permissible Overvoltage GU Specifications Item Performance Characteristics Category Temperature Range – 40 to +105˚C (200 250V), – 25 to +105˚C (400 450V) Rated Voltage Range 200 to 450V Rated Capacitance Range 82 to 2200µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current I 3 CV(µA) (After 5 minutes' application of rated voltage [C : Rated Capacitance(µF), V : Voltage ( V ) ] Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 200 to 400 0.15 Rated voltage(V) Z – 25°C / Z+20°C Impedance ratio Z – 40°C / Z+20°C ZT/Z20(MAX.) Stability at Low Temperature Measurement frequency : 120Hz at 20˚C 450 0.20 Measurement frequeny : 120Hz 400 • 450 8 ----- 200 • 250 3 12 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right. Safety Performance When overvoltage (rated voltage x 1.5, limited current = 1A) is applied to a capacitor, the pressure relief vent will operate normally more than 60% of the time without short and flame. Marking Printed with white color letter on black sleeve. Drawing Capacitance change tan δ Leakage current 1 2 3 4 5 6 7 8 10 L2 10 0 +0.2 -0.1 +0.2 -0.1 voltage (400V) RatedRated Capacitance (120F) .2 +0 1 8 -0. 0. 0.8 Series(400V) name Rated voltage Type Series name .2 +0 .1 -0 Case length code Case dia. code Case length code φD dia. Code Case code 22 Z φD Code 25 A 22 Z 30 B 25 A 35 C 30 B 35 C Type 2.5 2.5 4.0±0.5 4.00.5 2-2φ±0.1 13 14 Rated capacitance (120µF) Capacitance tolerance (20%) 0.8 .1 0.1 10 11 12 Capacitance tolerance (±20%) Configuration 4.0±0.5 0.8 10 ± 9 Configuration 10 4.00.5 Pressure relief vent L±2 Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value L1 A L 12 Z 13 3 14 0 2 R 3 2 4 G 5 1 6 2 7 1 8 M 9 E 10 11 L AR 2 G 1 2 1 ME L Z 3 0 Sleeve (P.E.T.) Pressure relief vent Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 400V 120µF) Polarity bar Sleeve (P.E.T.) Polarity bar +1.5 MAX. φD +1.5 φDMAX. Capacitance change tan δ Leakage current 1.5 +0.2 -0.1 2-2 hole φ±0.1dimensions) (PC board (Terminal dimensions) 1.5 +0.2 -0.1 (PC board hole dimensions) (Terminal dimensions) The other terminal is also available upon request. Please refer page 326 for schematic of dimensions. Frequency coefficient of rated ripple current Frequency(Hz) coeff. 50 60 120 300 1k 10k 50k or more 200 • 250V 0.81 0.85 1.00 1.17 1.32 1.45 1.50 400 • 450V 0.77 0.82 1.00 1.16 1.30 1.41 1.43 Minimum order quantity : 50pcs. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS AR series Dimensions 200V (2D) 250V (2E) Size φD × L(mm) Rated ripple (mA) Leakage Current 22 × 25 22 × 30 1310 0.83 LAR2D391MELZ25 1480 0.91 LAR2D471MELZ30 1480 0.91 LAR2D471MELA25 560 25 × 25 22 × 35 1600 1.00 LAR2D561MELZ35 1750 1.10 LAR2D681MELZ40 680 22 × 40 25 × 30 1750 1.10 LAR2D681MELA30 30 × 25 22 × 45 1750 1.10 LAR2D681MELB25 2040 1.21 LAR2D821MELZ45 25 × 35 22 × 50 2040 1.21 LAR2D821MELA35 2300 1.34 LAR2D102MELZ50 25 × 45 30 × 30 2300 1.34 LAR2D102MELA45 2300 1.34 LAR2D102MELB30 35 × 25 25 × 50 2300 1.34 LAR2D102MELC25 2650 1.46 LAR2D122MELA50 30 × 35 35 × 30 2650 1.46 LAR2D122MELB35 2650 1.46 LAR2D122MELC30 1500 30 × 40 35 × 35 2800 1.64 LAR2D152MELB40 2800 1.64 LAR2D152MELC35 1800 30 × 50 35 × 40 3080 1.80 LAR2D182MELB50 3080 1.80 2200 35 × 45 3480 1.98 LAR2D182MELC40 LAR2D222MELC45 Cap. (µF) 390 470 820 1000 1200 (mA) Code Cap. (µF) Size φD × L(mm) Rated ripple (mA) Leakage Current 22 × 25 22 × 30 1100 0.77 1200 0.86 LAR2E331MELZ30 25 × 25 22 × 35 1200 0.86 LAR2E331MELA25 1300 0.93 LAR2E391MELZ35 25 × 30 22 × 40 1300 0.93 LAR2E391MELA30 1400 1.02 LAR2E471MELZ40 25 × 35 30 × 25 1400 1.02 LAR2E471MELA35 1400 1.02 LAR2E471MELB25 22 × 45 25 × 35 1500 1.12 LAR2E561MELZ45 1500 1.12 LAR2E561MELA35 30 × 30 22 × 50 1500 1.12 LAR2E561MELB30 1700 1.23 LAR2E681MELZ50 25 × 40 30 × 30 1700 1.23 LAR2E681MELA40 1700 1.23 LAR2E681MELB30 35 × 25 25 × 45 1700 1.23 LAR2E681MELC25 2000 1.35 LAR2E821MELA45 30 × 35 35 × 30 2000 1.35 LAR2E821MELB35 2000 1.35 LAR2E821MELC30 1000 30 × 40 35 × 35 2200 1.50 LAR2E102MELB40 2200 1.50 LAR2E102MELC35 1200 30 × 45 35 × 40 2300 1.64 LAR2E122MELB45 2300 1.64 LAR2E122MELC40 35 × 45 35 × 50 2500 1.83 1800 2700 2.01 LAR2E152MELC45 LAR2E182MELC50 Cap. (µF) Size φD × L(mm) Rated ripple (mA) Leakage Current 22 × 25 22 × 30 340 0.57 690 0.63 LAR2W101MELZ30 25 × 25 22 × 35 690 0.63 LAR2W101MELA25 720 0.69 LAR2W121MELZ35 25 × 30 22 × 40 720 0.69 LAR2W121MELA30 790 0.77 LAR2W151MELZ40 25 × 30 30 × 25 790 0.77 LAR2W151MELA30 790 0.77 LAR2W151MELB25 22 × 45 25 × 35 870 0.85 LAR2W181MELZ45 870 0.85 LAR2W181MELA35 270 330 390 470 560 680 820 1500 400V (2G) Rated ripple (mA) Leakage Current 22 × 25 22 × 30 680 0.60 LAR2G101MELZ25 120 730 0.65 LAR2G121MELZ30 950 0.80 LAR2G181MELZ35 180 22 × 35 25 × 30 950 0.80 LAR2G181MELA30 30 × 25 22 × 45 950 0.80 LAR2G181MELB25 100 220 270 330 390 470 560 680 Code LAR2E271MELZ25 450V (2W) Size φD × L(mm) Cap. (µF) (mA) (mA) Code 1100 0.88 LAR2G221MELZ45 25 × 35 30 × 25 1100 0.88 LAR2G221MELA35 1100 0.88 LAR2G221MELB25 22 × 50 25 × 40 1220 0.98 LAR2G271MELZ50 1220 0.98 LAR2G271MELA40 30 × 30 35 × 25 1220 0.98 LAR2G271MELB30 1220 0.98 LAR2G271MELC25 25 × 45 30 × 35 1440 1.08 LAR2G331MELA45 1440 1.08 LAR2G331MELB35 25 × 50 30 × 40 1550 1.18 LAR2G391MELA50 1550 1.18 LAR2G391MELB40 35 × 30 30 × 45 1550 1.18 LAR2G391MELC30 1680 1.30 LAR2G471MELB45 35 × 35 30 × 50 1680 1.30 LAR2G471MELC35 1900 1.41 LAR2G561MELB50 35 × 40 35 × 45 1900 1.41 2120 1.56 LAR2G561MELC40 LAR2G681MELC45 82 100 120 150 180 (mA) Code LAR2W820MELZ25 870 0.85 LAR2W181MELB30 1050 0.94 LAR2W221MELA40 30 × 30 35 × 25 1050 0.94 LAR2W221MELB30 1050 0.94 LAR2W221MELC25 25 × 50 30 × 35 1230 1.04 LAR2W271MELA50 1230 1.04 LAR2W271MELB35 35 × 30 30 × 40 1230 1.04 LAR2W271MELC30 1380 1.15 LAR2W331MELB40 35 × 35 30 × 50 1380 1.15 LAR2W331MELC35 1610 1.25 LAR2W391MELB50 1610 1.25 LAR2W391MELC40 470 35 × 40 35 × 45 1780 1.37 560 35 × 50 1990 1.50 LAR2W471MELC45 LAR2W561MELC50 30 × 30 25 × 40 220 270 330 390 Rated ripple current (mArms) at 105°C 120Hz CAT.8100D