General Purpose, High Stability and AC Line EMI Suppression JSN Series Unencapsulated Stacked Chip with Flat Terminations, 63 – 250 VDC, for DC Link Overview Applications Jumbo stacked naked metallized polyester capacitor with flat terminations. JSN Series capacitors are designed especially for automotive power electronics applications that require high reliability, long life and severe working conditions such as high operating temperature and significant mechanical and vibration requirements. Benefits • • • • • • • Rated voltage: 63 – 250 VDC Rated voltage: 40 – 160 VAC Capacitance range: 1.8 – 82 µF Capacitance tolerance: ±10%, ±20% Climatic category: 55/125/56 RoHS Compliant and lead-free terminations Operating temperature range of -55˚C to +125˚C Part Number System JSN E Rated Voltage (VDC) JSN = Jumbo D = 63 Stacked E = 100 Naked I = 250 Series K 5100 Size Code Capacitance Code (pF) See Dimension Table Digits 2-4 indicate the first three digits of the capacitance value. First digit indicates the number of zeros to be added. M Capacitance Tolerance K = ±10% M = ±20% B 6 Terminal Width (mm) B = Metallized 6 = 20 PET Dielectric M 0 Packaging Internal Use See Ordering Options Table 0 (Standard) One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3077_JSN • 5/20/2015 1 Film Surface Mount Capacitors – General Purpose, High Stability and AC Line EMI Suppression JSN Series Unencapsulated Stacked Chip with Flat Terminations, 63 – 250 VDC, for DC Link Ordering Options Table Packaging Code Packaging Type Standard Packaging Options Bulk (Bag) Bulk (Tray) Tape & Reel (Standard Reel)* M L N *Available on Request Dimensions – Millimeters Size Code K J B H Nominal Tolerance 21.5 30.0 Maximum Maximum See Part Number Table L d a t Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 17.0 17.0 Maximum Maximum 2 2 +/-1.0 +/-1.0 2 2 +/-1.0 +/-1.0 0.3 0.3 +/-0.1 +/-0.1 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3077_JSN • 5/20/2015 2 Film Surface Mount Capacitors – General Purpose, High Stability and AC Line EMI Suppression JSN Series Unencapsulated Stacked Chip with Flat Terminations, 63 – 250 VDC, for DC Link Performance Characteristics Voltage Range (VDC) 63 100 250 Voltage Range (VAC) 40 63 160 15 – 82 6.8 – 47 1.8 – 10 Capacitance Range (µF) Capacitance Values Capacitance Tolerance Category Temperature Range Rated Temperature Voltage Derating Climatic Category Test Voltage E6 series (IEC 60063) ±10%, ±20% -55°C to +125°C +105 °C The rated voltage is decreased by 1.25%/°C from +105°C to +125°C 55/125/56 IEC 60068-1 1.4 x VR applied for 2 seconds at +25°C ±5 Measured at +25°C ±5°C Insulation Resistance Dissipation Factor VR (VDC) Minimum Values Between Terminals 63 ≥ 100 MΩ • µF 100 ≥ 250 MΩ • µF 250 ≥ 800 MΩ • µF Maximum Values at 25°C ±5°C 1 kHz 1.0% © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3077_JSN • 5/20/2015 3 Film Surface Mount Capacitors – General Purpose, High Stability and AC Line EMI Suppression JSN Series Unencapsulated Stacked Chip with Flat Terminations, 63 – 250 VDC, for DC Link Maximum Vrms vs. Frequency (Sinusoidal Waveform/Th ≤ +40ºC) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3077_JSN • 5/20/2015 4 Film Surface Mount Capacitors – General Purpose, High Stability and AC Line EMI Suppression JSN Series Unencapsulated Stacked Chip with Flat Terminations, 63 – 250 VDC, for DC Link Maximum Irms vs. Frequency (Sinusoidal Waveform/Th ≤ +40ºC) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3077_JSN • 5/20/2015 5 Film Surface Mount Capacitors – General Purpose, High Stability and AC Line EMI Suppression JSN Series Unencapsulated Stacked Chip with Flat Terminations, 63 – 250 VDC, for DC Link Environmental Test Data Damp Heat, Steady State Test Conditions Temperature Relative Humidity (RH) Test Duration +40°C ±2°C 93% ±2% 56 days Performance Capacitance Change ∆ C/C ≤ 7% DF Change (∆tgδ) ≤ 50 x 10 -4 at 1 kHz Insulation Resistance ≥ 50% of limit value Endurance Test Conditions Temperature 125°C ±2°C Test Duration 2,000 hours Voltage Applied 1.25 x VC Performance Capacitance Change ∆ C/C ≤ 5% DF Change (∆tgδ) ≤ 50 x 10 -4 at 1 kHz Insulation Resistance ≥ 50% of limit value Rapid Change of Temperature Test Conditions Temperature Number of Cycles 1 hour at -55°C, 1 hour at +125°C 1,000 Performance Capacitance Change ∆ C/C DF Change (∆tgδ) Insulation Resistance ≤ 3% ≤ 50 x 10 -4 at 1 kHz ≥ limit value No Mechanical Damage Environmental Compliance All KEMET surface mount capacitors are RoHS Compliant. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3077_JSN • 5/20/2015 6 Film Surface Mount Capacitors – General Purpose, High Stability and AC Line EMI Suppression JSN Series Unencapsulated Stacked Chip with Flat Terminations, 63 – 250 VDC, for DC Link Table 1 – Ratings & Part Number Reference Dimensions in mm VDC VAC Capacitance Value (µF) L dV/dt (V/µs) New KEMET Part Number B H Legacy Part Number 63 63 63 63 63 63 100 100 100 100 100 100 100 250 250 250 250 250 250 250 40 40 40 40 40 40 63 63 63 63 63 63 63 160 160 160 160 160 160 160 15 22 33 47 68 82 6.8 8.2 10 15 22 33 47 1.8 2.2 3.3 4.7 6.8 8.2 10 21.5 21.5 21.5 30 30 30 21.5 21.5 21.5 30 21.5 30 30 21.5 21.5 21.5 21.5 21.5 30 30 6.8 8.6 11.5 11.5 15.3 17.8 6.5 6.9 7.8 8 13.9 14.2 17.3 6.7 7.5 9.7 12.6 17 14.9 17.5 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 25 25 25 25 25 25 27 27 27 27 27 27 27 40 40 40 40 40 40 40 SNDK5150(1)B6(2)0 SNDK5220(1)B6(2)0 SNDK5330(1)B6(2)0 SNDJ5470(1)B6(2)0 SNDJ5680(1)B6(2)0 SNDJ5820(1)B6(2)0 SNEK4680(1)B6(2)0 SNEK4820(1)B6(2)0 SNEK5100(1)B6(2)0 SNEJ5150(1)B6(2)0 SNEK5220(1)B6(2)0 SNEJ5330(1)B6(2)0 SNEJ5470MB6(2)0 SNIK4180(1)B6(2)0 SNIK4220(1)B6(2)0 SNIK4330(1)B6(2)0 SNIK4470(1)B6(2)0 SNIK4680(1)B6(2)0 SNIJ4820(1)B6(2)0 SNIJ5100(1)B6(2)0 JSNDK5150(1)B6(2)0 JSNDK5220(1)B6(2)0 JSNDK5330(1)B6(2)0 JSNDJ5470(1)B6(2)0 JSNDJ5680(1)B6(2)0 JSNDJ5820(1)B6(2)0 JSNEK4680(1)B6(2)0 JSNEK4820(1)B6(2)0 JSNEK5100(1)B6(2)0 JSNEJ5150(1)B6(2)0 JSNEK5220(1)B6(2)0 JSNEJ5330(1)B6(2)0 JSNEJ5470MB6(2)0 JSNIK4180(1)B6(2)0 JSNIK4220(1)B6(2)0 JSNIK4330(1)B6(2)0 JSNIK4470(1)B6(2)0 JSNIK4680(1)B6(2)0 JSNIJ4820(1)B6(2)0 JSNIJ5100(1)B6(2)0 VDC VAC Capacitance Value (µF) B (mm) H (mm) L (mm) dV/dt (V/µs) New KEMET Part Number Legacy Part Number (1) K = ±10%, M = ±20%. (2) Insert packaging code. See Ordering Options Table for available options. Bold denotes available only tolerance M (±20%) Soldering Process JSN Series capacitors are to be mounted with reflow process (see thermal profile) or gluing. Reflow soldering temperature measured on the top body surface of the component: Preheating temperature should be less than 160°C. The peak temperature must not exceed 225°C. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3077_JSN • 5/20/2015 7 Film Surface Mount Capacitors – General Purpose, High Stability and AC Line EMI Suppression JSN Series Unencapsulated Stacked Chip with Flat Terminations, 63 – 250 VDC, for DC Link Marking •KEMET •Capacitance • Capacitance tolerance code • Rated voltage • Manufacturing batch Packaging Quantities Chip Size (EIA) 6080 60115 Height (mm) Bulk (Tray) All All 308 252 Landing Size K J Dimensions in mm A B C D 21.9 30.4 5 5 10.2 10.2 20.4 20.4 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3077_JSN • 5/20/2015 8 Film Surface Mount Capacitors – General Purpose, High Stability and AC Line EMI Suppression JSN Series Unencapsulated Stacked Chip with Flat Terminations, 63 – 250 VDC, for DC Link KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Harlow, United Kingdom Tel: 44-1279-460122 Taipei, Taiwan Tel: 886-2-27528585 Espoo, Finland Tel: 358-9-5406-5000 Southeast Asia Singapore Tel: 65-6701-8033 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 Central Novi, MI Tel: 248-306-9353 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3077_JSN • 5/20/2015 9 Film Surface Mount Capacitors – General Purpose, High Stability and AC Line EMI Suppression JSN Series Unencapsulated Stacked Chip with Flat Terminations, 63 – 250 VDC, for DC Link Disclaimer Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3077_JSN • 5/20/2015 10