F3302 - 2008 SMD Film Capacitors Catalogue

F3302 - 2008
SMD Film Capacitors
Catalogue
CONTENTS
page
Short guide to main applications........................................................................................................................................... 2
Product coding and packaging.............................................................................................................................................. 3
PEN and PPS dielectrics typical temperature graphs........................................................................................................... 4
PEN and PPS dielectrics typical frequency graphs............................................................................................................... 5
LDE series - PEN dielectric RoHS 6
Low voltage (50 - 63 - 100 - 250 VDC) size table.............................................................................................. 6 and 7
High voltage (400 - 630 - 1000 VDC) size table........................................................................................................... 8
Technical data............................................................................................................................................................ 9
Maximum VRMS and IRMS vs. frequency graphs...............................................................................................10 and 11
LDB series - PPS dielectric RoHS 6
16 - 50 VDC size table............................................................................................................................................... 12
Technical data.......................................................................................................................................................... 13
Soldering recommendations and cautions.............................................................................................................. 14 and 15
Production process basic suggestions................................................................................................................................ 16
Although the text of this publication is accurate to the best of our knowledge when printed, we reserve the right to make
changes without prior notice.
1
07/2008
SMD Film Capacitors
Short guide to main applications
Device
CONSUMER
AUTOMOTIVE
TELECOM
Mobile phone
Application
A/D converter
PLL filtering
Arcotronics
SMD Film proposal
Main Competitors
LDB series
Ceramic NP0
Bluetooth ®
PLL filtering
LDB series
Ceramic NP0
Modem
DMT modulation /
demodulation
LDE / LDB series
Ceramic NP0
Base station
Filtering
LDE / LDB series
Ceramic X7R
Line Card
Input filtering
LDE series
Ceramic NP0
Splitter
Filtering
LDE series
Ceramic X7R
Wiper
Noise suppression
LDE series
Ceramic X7R
Driver
information &
car
entertainment
Filtering, timing,
coupling and
decoupling
LDE series
Ceramic X7R
Tire pressure
monitoring
system
Resonant circuit
LDE series
Ceramic X7R
DC/DC
converter
Input / output
filtering
LDE series
Ceramic X7R
LCD Monitor
Inverter unit
LDE series
Ceramic X7R
DVD player
Filtering
LDB series
Ceramic NP0
PDA
Inverter unit
LDB series
Ceramic NP0
Hi-Fi systems
Filtering
LDE / LDB series
Ceramic X7R
Description:
- Non-encapsulated construction
- Stacked technology
- Metallized PEN (PolyEthylene Naphtalate) in LDE series
- Metallized PPS (PolyPhenylene Sulfide) in LDB series
- RoHS 6 compliant (no hazardous materials)
Features:
- Excellent stability vs. temperature, frequency and time
- Self-healing
- High reliability
- Low ESR (Equivalent Series Resistance)
- Typical failure mode at the end of life: open circuit
- No piezoelectric effect
- No cracking
- No VCC (Voltage Coefficient of Capacitance)
SMD Film Capacitors are complementary to MLCCs for professional applications.
07/2008
2
SMD Film advantages
- Low Lock-up time
- Narrow tolerance
- No cracking
- High stability vs. frequency
and temperature
- High reliability
- No cracking
- High stability vs. frequency
and temperature
- High reliability
- Low ESR
- No cracking
- High reliability
- Low ESR
- No cracking
- High stability vs. frequency
and temperature
- High reliability
- No cracking
SMD Film Capacitors
Product coding
LDE series - RoHS 6
LDB series - RoHS 6
The part number is composed of 15 digits:
The part number is composed of 14 digits:
1
2
3
4
5
6
7
8
9
L D E -
-
-
-
-
-
10
11
- A -
-
Digit 1 to 3 Series code.
Digit 4
D.C. rated voltage: (VR)
C= 50 VDC D = 63 VDC
I = 250 VDC M= 400 VDC
Q= 1000 VDC (new version)
Digit 5
12.06
A
1
12 13 14 15
-
0
B
18.12
C
22.20
D
28.24
E = 100 VDC
P = 630 VDC
40.30
E
50.40
F
G
3
4
5
6
7
8
9
10
11
L D B -
-
-
-
-
-
-
C
12 13 14
-
-
-
Digit 1 to 3 Series code.
Digit 4
D.C. rated voltage: (VR)
A= 16 VDC
C= 50 VDC
Digit 5
Size code (customized sizes available upon request)
12.10
2
Size code
60.54
12.06
12.10
18.12
H
A
B
C
Digit 6 to 9Capacitance value
Digits 7 - 8 - 9 indicate the first three numbers of the capacitance value, digit 6 indicates the number of zeros that must be added to obtain the rated capacitance in pF.
Digit 10
Capacitance tolerance
Standard:
K = ± 10 %
M = ± 20 %
(J = ±5% available upon request and review of
project/application)
Digit 11
Dielectric code
A = PEN
Digit 12 Version
5 = standard 0 = miniature A to Z = special
Digit 13
Packaging
N = taped
A to Z = special
Digit 14
Internal use
Digit 15
0 (used in LDE RoHS 6 series only)
Digit 6 to 9 Capacitance value
Digits 7 - 8 - 9 indicate the first three numbers of the capacitance value, digit 6 indicates the number of zeros that must be added to obtain the rated capacitance in pF.
Digit 10
Digit 11
Digit 12 Digit 13
Digit 14
Capacitance tolerance
G = ± 2 %
J=±5%
Dielectric code
C = PPS
Version
5 = standard
A to Z = special
Packaging
N = taped
A to Z = special
Internal use
Product packaging
SMD Film Capacitor (top view)
Size
code
12.06
12.10
18.12
22.20
28.24
40.30
50.40
60.54
Carrier
tape
code
a
b
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
Tape
Carrier tape dimensions
A0
[mm]
2.00
3.00
3.80
3.90
B0
[mm]
3.80
3.80
5.30
5.20
5.50
6.50
6.60
7.90
8.60
11.00
10.90
10.90
11.00
13.50
14.40
16.00
K0
[mm]
1.30
2.10
2.00
2.60
2.90
3.80
4.90
3.80
4.60
5.50
3.80
4.60
5.80
3.80
4.70
5.90
4.30
5.10
5.80
Reel
Reel dimensions
W
[mm]
8
8
P
[mm]
4
4
T
[μm]
250
250
Ø
[mm]
180
180
W1
[mm]
8
8
W2
[mm]
12
12
12
8
300
330
12
16
12
8
250
330
12
16
16
8
300
330
16
20
16
12
300
330
16
20
24
12
250
330
24
28
24
16
300
300
300
330
24
28
3
Packaging
quantities
(pcs per reel)
3000
2250
4000
3000
3000
2250
1750
2250
1750
1500
1500
1250
1000
1500
1250
1000
1000
750
750
In accordance with IEC 60286-3
Materials:
- carrier tape: antistatic material
- cover tape: polyester + polythene
- reel: recyclable polystyrene
All parts in reels are packed in
hermetically sealed Moisture Barrier
Bag (MBB) Class 1.
07/2008
SMD Film Capacitors
PEN and PPS dielectrics typical temperature graphs
PEN
PPS
Capacitance vs. temperature
Capacitance vs. temperature
(f = 1 kHz)
(f = 1 kHz)
$ C/C [%]
6.0
5.0
4.0
3.0
2.0
1.0
0.0
-1.0
-2.0
-60
-40
-20
0
20
40
60
80
100 120 140
T [°C]
07/2008
Dissipation factor vs. temperature
Dissipation factor vs. temperature
(f = 1 kHz)
(f = 1 kHz)
Insulation resistance vs. temperature
Insulation resistance vs. temperature
4
SMD Film Capacitors
PEN and PPS dielectrics typical frequency graphs
PEN
PPS
Capacitance vs. frequency
Capacitance vs. frequency
Dissipation factor vs. frequency
Dissipation factor vs. frequency
Equivalent Series Resistance vs. frequency
Equivalent Series Resistance vs. frequency
PEN and PPS Impedance vs. frequency
Note: measurements performed at T = 25 ± 5 °C
5
07/2008
SMD Film Capacitors
LDE series - PEN dielectric RoHS 6
ree
F
ead
L
LOW VOLTAGE (capacitance range: 1000 pF to 0.047 µF)
Standard and miniature versions
50 VDC / 40 VAC
Rated
cap.
Size
code
Pcs
per
reel
Hmax
[mm]
Part number
63 VDC / 40 VAC
Size
code
Pcs
per
reel
Hmax
[mm]
100 VDC / 63 VAC
Part number
Size
code
Pcs
per
reel
Hmax
[mm]
250 VDC / 120 VAC
Part number
Size
code
Pcs
per
reel
Hmax
[mm]
Part number
Rated
cap.
1000 pF 12.06
3000
1.1
LDECA1100 - A0 - - 0 12.06
3000
1.1
LDEDA1100 - A0 - - 0 12.06
3000
1.1
LDEEA1100 - A0 - - 0 12.06
3000
1.1
1200 pF 12.06
3000
1.1
LDECA1120 - A0 - - 0 12.06
3000
1.1
LDEDA1120 - A0 - - 0 12.06
3000
1.1
LDEEA1120 - A0 - - 0 12.06
3000
1.1
LDEIA1120 - A0 - - 0 1200 pF
18.12
4000
1.7
LDECC1150 - A5 - - 0 18.12
4000
1.7
LDEDC1150 - A5 - - 0 18.12
4000
1.7
LDEEC1150 - A5 - - 0 18.12
4000
1.7
LDEIC1150 - A5 - - 0
12.06
3000
1.1
LDECA1150 - A0 - - 0 12.06
3000
1.1
LDEDA1150 - A0 - - 0 12.06
3000
1.1
LDEEA1150 - A0 - - 0 12.06
3000
1.1
LDEIA1150 - A0 - - 0
18.12
4000
1.7
LDECC1180 - A5 - - 0 18.12
4000
1.7
LDEDC1180 - A5 - - 0 18.12
4000
1.7
LDEEC1180 - A5 - - 0 18.12
4000
1.7
LDEIC1180 - A5 - - 0
12.06
3000
1.1
LDECA1180 - A0 - - 0 12.06
3000
1.1
LDEDA1180 - A0 - - 0 12.06
3000
1.1
LDEEA1180 - A0 - - 0 12.06
3000
1.1
LDEIA1180 - A0 - - 0
18.12
4000
1.7
LDECC1220 - A5 - - 0 18.12
4000
1.7
LDEDC1220 - A5 - - 0 18.12
4000
1.7
LDEEC1220 - A5 - - 0 18.12
4000
1.7
LDEIC1220 - A5 - - 0
12.06
3000
1.1
LDECA1220 - A0 - - 0 12.06
3000
1.1
LDEDA1220 - A0 - - 0 12.06
3000
1.1
LDEEA1220 - A0 - - 0 12.06
3000
1.1
LDEIA1220 - A0 - - 0
18.12
4000
1.8
LDECC1270 - A5 - - 0 18.12
4000
1.8
LDEDC1270 - A5 - - 0 18.12
4000
1.8
LDEEC1270 - A5 - - 0 18.12
4000
1.8
LDEIC1270 - A5 - - 0
12.06
3000
1.1
LDECA1270 - A0 - - 0 12.06
3000
1.1
LDEDA1270 - A0 - - 0 12.06
3000
1.1
LDEEA1270 - A0 - - 0 12.06
3000
1.1
LDEIA1270 - A0 - - 0
18.12
4000
1.7
LDECC1330 - A5 - - 0 18.12
4000
1.7
LDEDC1330 - A5 - - 0 18.12
4000
1.7
LDEEC1330 - A5 - - 0 18.12
4000
1.7
LDEIC1330 - A5 - - 0
12.06
3000
1.2
LDECA1330 - A0 - - 0 12.06
3000
1.2
LDEDA1330 - A0 - - 0 12.06
3000
1.2
LDEEA1330 - A0 - - 0 12.06
3000
1.2
LDEIA1330 - A0 - - 0
18.12
4000
1.7
LDECC1390 - A5 - - 0 18.12
4000
1.7
LDEDC1390 - A5 - - 0 18.12
4000
1.7
LDEEC1390 - A5 - - 0 18.12
4000
1.7
LDEIC1390 - A5 - - 0
12.06
3000
1.1
LDECA1390 - A0 - - 0 12.06
3000
1.1
LDEDA1390 - A0 - - 0 12.06
3000
1.1
LDEEA1390 - A0 - - 0 12.10
2250
1.6
LDEIB1390 - A0 - - 0
18.12
4000
1.8
LDECC1470 - A5 - - 0 18.12
4000
1.8
LDEDC1470 - A5 - - 0 18.12
4000
1.8
LDEEC1470 - A5 - - 0 18.12
4000
1.8
LDEIC1470 - A5 - - 0
12.06
3000
1.1
LDECA1470 - A0 - - 0 12.06
3000
1.1
LDEDA1470 - A0 - - 0 12.06
3000
1.1
LDEEA1470 - A0 - - 0 12.10
2250
1.6
LDEIB1470 - A0 - - 0
18.12
4000
1.7
LDECC1560 - A5 - - 0 18.12
4000
1.7
LDEDC1560 - A5 - - 0 18.12
4000
1.7
LDEEC1560 - A5 - - 0 18.12
4000
1.7
LDEIC1560 - A5 - - 0
12.06
3000
1.1
LDECA1560 - A0 - - 0 12.06
3000
1.1
LDEDA1560 - A0 - - 0 12.06
3000
1.1
LDEEA1560 - A0 - - 0 12.10
2250
1.6
LDEIB1560 - A0 - - 0
18.12
4000
1.7
LDECC1680 - A5 - - 0 18.12
4000
1.7
LDEDC1680 - A5 - - 0 18.12
4000
1.7
LDEEC1680 - A5 - - 0 18.12
4000
1.7
LDEIC1680 - A5 - - 0
12.06
3000
1.1
LDECA1680 - A0 - - 0 12.06
3000
1.1
LDEDA1680 - A0 - - 0 12.06
3000
1.1
LDEEA1680 - A0 - - 0 12.10
2250
1.8
LDEIB1680 - A0 - - 0
18.12
4000
1.8
LDECC1820 - A5 - - 0 18.12
4000
1.8
LDEDC1820 - A5 - - 0 18.12
4000
1.8
LDEEC1820 - A5 - - 0 18.12
4000
1.8
LDEIC1820 - A5 - - 0
12.06
3000
1.1
LDECA1820 - A0 - - 0 12.06
3000
1.1
LDEDA1820 - A0 - - 0 12.06
3000
1.1
LDEEA1820 - A0 - - 0 12.10
2250
2.0
LDEIB1820 - A0 - - 0
18.12
4000
1.7
LDECC2100 - A5 - - 0 18.12
4000
1.7
LDEDC2100 - A5 - - 0 18.12
4000
1.7
LDEEC2100 - A5 - - 0 18.12
4000
1.7
LDEIC2100 - A5 - - 0
12.06
3000
1.1
LDECA2100 - A0 - - 0 12.06
3000
1.1
LDEDA2100 - A0 - - 0 12.06
3000
1.1
LDEEA2100 - A0 - - 0 12.10
2250
2.1
LDEIB2100 - A0 - - 0
18.12
4000
1.7
LDECC2120 - A5 - - 0 18.12
4000
1.7
LDEDC2120 - A5 - - 0 18.12
4000
1.7
LDEEC2120 - A5 - - 0 18.12
4000
1.7
LDEIC2120 - A5 - - 0
12.06
3000
1.1
LDECA2120 - A0 - - 0 12.06
3000
1.1
LDEDA2120 - A0 - - 0 12.06
3000
1.1
LDEEA2120 - A0 - - 0
18.12
4000
1.7
LDECC2150 - A5 - - 0 18.12
4000
1.7
LDEDC2150 - A5 - - 0 18.12
4000
1.7
LDEEC2150 - A5 - - 0 18.12
4000
1.7
LDEIC2150 - A5 - - 0
12.06
3000
1.2
LDECA2150 - A0 - - 0 12.06
3000
1.2
LDEDA2150 - A0 - - 0 12.06
3000
1.2
LDEEA2150 - A0 - - 0
18.12
4000
1.8
LDECC2180 - A5 - - 0 18.12
4000
1.8
LDEDC2180 - A5 - - 0 18.12
4000
1.8
LDEEC2180 - A5 - - 0 22.20
3000
2.2
LDEID2180 - A5 - - 0
12.06
3000
1.1
LDECA2180 - A0 - - 0 12.06
3000
1.1
LDEDA2180 - A0 - - 0 12.10
2250
1.5
LDEEB2180 - A0 - - 0 18.12
4000
1.8
LDEIC2180 - A0 - - 0
18.12
4000
1.7
LDECC2220 - A5 - - 0 18.12
4000
1.7
LDEDC2220 - A5 - - 0 18.12
4000
1.7
LDEEC2220 - A5 - - 0 22.20
3000
2.5
LDEID2220 - A5 - - 0
12.06
3000
1.1
LDECA2220 - A0 - - 0 12.06
3000
1.1
LDEDA2220 - A0 - - 0 12.10
2250
1.5
LDEEB2220 - A0 - - 0 18.12
3000
2.2
LDEIC2220 - A0 - - 0
18.12
4000
1.7
LDECC2270 - A5 - - 0 18.12
4000
1.7
LDEDC2270 - A5 - - 0 18.12
4000
1.7
LDEEC2270 - A5 - - 0 22.20
2250
2.9
LDEID2270 - A5 - - 0
12.06
3000
1.1
LDECA2270 - A0 - - 0 12.06
3000
1.1
LDEDA2270 - A0 - - 0 12.10
2250
1.7
LDEEB2270 - A0 - - 0 18.12
3000
2.5
LDEIC2270 - A0 - - 0
1500 pF
1800 pF
2200 pF
2700 pF
3300 pF
3900 pF
4700 pF
5600 pF
6800 pF
8200 pF
0.010 µF
0.012 µF
0.015 µF
0.018 µF
0.022 µF
0.027 µF
LDEIA1100 - A0 - - 0 1000 pF
1500 pF
1800 pF
2200 pF
2700 pF
3300 pF
3900 pF
4700 pF
5600 pF
6800 pF
8200 pF
0.010 µF
0.012 µF
0.015 µF
0.018 µF
0.022 µF
0.027 µF
18.12
4000
1.8
LDECC2330 - A5 - - 0 18.12
4000
1.8
LDEDC2330 - A5 - - 0 18.12
4000
1.8
LDEEC2330 - A5 - - 0 22.20
3000
1.9
LDEID2330 - A5 - - 0
0.033 µF 12.10
2250
2.0
LDECB2330 - A0 - - 0 12.10
2250
2.0
LDEDB2330 - A0 - - 0 12.10
2250
2.0
LDEEB2330 - A0 - - 0 18.12
3000
2.6
LDEIC2330 - A0 - - 0 0.033 µF
12.06
3000
1.2
*LDECA2330 - A0 - - 0
3000
1.2
*LDEDA2330 - A0 - - 0
18.12
4000
1.7
LDECC2390 - A5 - - 0 18.12
4000
1.7
LDEDC2390 - A5 - - 0 18.12
4000
1.7
LDEEC2390 - A5 - - 0 22.20
3000
2.1
LDEID2390 - A5 - - 0
12.10
2250
2.1
LDECB2390 - A0 - - 0 12.10
2250
2.1
LDEDB2390 - A0 - - 0 12.10
2250
2.1
LDEEB2390 - A0 - - 0
18.12
4000
1.7
LDECC2470 - A5 - - 0 18.12
4000
1.7
LDEDC2470 - A5 - - 0 18.12
4000
1.7
LDEEC2470 - A5 - - 0 22.20
3000
2.3
LDEID2470 - A5 - - 0
12.10
2250
2.1
LDECB2470 - A0 - - 0 12.10
2250
2.1
LDEDB2470 - A0 - - 0 12.10
2250
2.1
LDEEB2470 - A0 - - 0
0.039 µF
0.047 µF
12.06
Tolerance - Standard: K = ±10%; M = ±20%;
(J = ±5% available upon request and review of project/application)
Packaging - N = Taped; A to Z = Special;
Internal use
* only K and M tolerances available
Size code
12.10
3.3 +0.3
- 0.1
18.12
4.7 +0.3
- 0.2
22.20
28.24
L (mm)
12.06
3.3 +0.3
- 0.1
6.0 ± 0.3
7.3 ± 0.4
10.5 ± 0.4 13.0 ± 0.4 15.5 ± 0.4
W (mm)
1.7 ± 0.2
2.5 ± 0.3
3.3 ± 0.3
5.0 ± 0.4
6.1 ± 0.4
7.9 ± 0.5
P/N 5 digit
A
B
C
D
E
F
th
07/2008
40.30
6
50.40
60.54
10.4 ± 0.5 13.7 ± 0.5
G
H
0.039 µF
0.047 µF
SMD Film Capacitors
LDE series - PEN dielectric RoHS 6
ree
F
ead
L
LOW VOLTAGE (capacitance range: 0.056 µF to 4.7 µF)
Standard and miniature versions
50 VDC / 40 VAC
Rated
cap.
0.056 µF
0.068 µF
0.082 µF
0.10 µF
0.12 µF
Size
code
Pcs
per
reel
Hmax
[mm]
18.12
4000
12.10
2250
18.12
63 VDC / 40 VAC
Size
code
Pcs
per
reel
Hmax
[mm]
1.7
LDECC2560 - A5 - - 0 18.12
4000
1.7
LDECB2560 - A0 - - 0 12.10
2250
4000
1.8
LDECC2680 - A5 - - 0 18.12
12.10
2250
2.0
18.12
3000
12.10
100 VDC / 63 VAC
Size
code
Pcs
per
reel
Hmax
[mm]
1.7
LDEDC2560 - A5 - - 0 18.12
4000
1.7
1.7
LDEDB2560 - A0 - - 0
4000
1.8
LDEDC2680 - A5 - - 0 18.12
4000
LDECB2680 - A0 - - 0 12.10
2250
2.0
LDEDB2680 - A0 - - 0
2.1
LDECC2820 - A5 - - 0 18.12
3000
2.1
LDEDC2820 - A5 - - 0 18.12
3000
2250
2.1
LDECB2820 - A0 - - 0 12.10
2250
2.1
LDEDB2820 - A0 - - 0
18.12
3000
2.4
LDECC3100 - A5 - - 0 18.12
3000
2.4
LDEDC3100 - A5 - - 0 18.12
12.10
2250
2.1
LDECB3100 - A0 - - 0 12.10
2250
2.1
LDEDB3100 - A0 - - 0
18.12
4000
1.7
LDECC3120 - A5 - - 0 18.12
4000
1.7
LDEDC3120 - A5 - - 0 22.20
3000
18.12
4000
1.9
LDECC3150 - A5 - - 0 18.12
4000
1.9
LDEDC3150 - A5 - - 0 22.20
18.12
3000
2.2
LDECC3180 - A5 - - 0 18.12
3000
2.2
LDEDC3180 - A5 - - 0 22.20
Part number
Part number
250 VDC / 120 VAC
Size
code
0.18 µF
LDEEC2560 - A5 - - 0 22.20 3000
2.6
LDEID2560 - A5 - - 0
1.8
LDEEC2680 - A5 - - 0 22.20
3000
2.8
LDEID2680 - A5 - - 0
2.1
LDEEC2820 - A5 - - 0 28.24 2250
2.6
LDEIE2820 - A5 - - 0
2250
3.5
LDEID2820 - A0 - - 0
LDEEC3100 - A5 - - 0 28.24 2250
22.20
2.9
LDEIE3100 - A5 - - 0
1750
4.1
LDEID3100 - A0 - - 0
2.6
LDEED3120 - A5 - - 0 28.24 2250
3.3
LDEIE3120 - A5 - - 0
1750
4.4
LDEID3120 - A0 - - 0
3000
1.9
LDEED3150 - A5 - - 0 28.24 1750
3.8
LDEIE3150 - A5 - - 0
3000
2.0
LDEED3180 - A5 - - 0 40.30 1500
3000
2.4
22.20
2.7
LDEIF3180 - A5 - - 0
1750
4.4
LDEIE3180 - A0 - - 0
LDEED3220 - A5 - - 0 40.30 1500
3.1
LDEIF3220 - A5 - - 0
1500
5.2
LDEIE3220 - A0 - - 0
28.24
18.12
0.22 µF
3000
2.4
LDECC3220 - A5 - - 0 18.12
3000
2.4
LDEDC3220 - A5 - - 0 22.20
Rated
cap.
Part number
22.20
0.15 µF
Pcs
per
reel
Hmax
[mm]
Part number
3000
2.4
28.24
0.056 µF
0.068 µF
0.082 µF
0.10 µF
0.12 µF
0.15 µF
0.18 µF
0.22 µF
0.27 µF
22.20
3000
1.9
LDECD3270 - A5 - - 0 22.20
3000
1.9
LDEDD3270 - A5 - - 0 22.20
3000
2.8
LDEED3270 - A5 - - 0 40.30 1500
3.7
LDEIF3270 - A5 - - 0
0.27 µF
0.33 µF
22.20
3000
1.9
LDECD3330 - A5 - - 0 22.20
3000
1.9
LDEDD3330 - A5 - - 0 22.20
2250
3.3
LDEED3330 - A5 - - 0 40.30 1250
4.3
LDEIF3330 - A5 - - 0
0.33 µF
22.20
3000
2.1
LDECD3390 - A5 - - 0 22.20
3000
2.1
LDEDD3390 - A5 - - 0 28.24
2250
2.6
LDEEE3390 - A5 - - 0 50.40 1500
3.3
LDEIG3390 - A5 - - 0
22.20
2250
3.7
LDEED3390 - A0 - - 0 40.30 1000
5.0
LDEIF3390 - A0 - - 0
22.20
3000
2.4
LDECD3470 - A5 - - 0 22.20
3000
2.4
LDEDD3470 - A5 - - 0 28.24
2250
3.0
LDEEE3470 - A5 - - 0 50.40 1250
3.8
LDEIG3470 - A5 - - 0
22.20
1750
4.4
LDEED3470 - A0 - - 0 40.30 1000
5.5
LDEIF3470 - A0 - - 0
LDEDD3560 - A5 - - 0 28.24
2250
3.5
LDEEE3560 - A5 - - 0 50.40 1250
0.39 µF
0.47 µF
22.20
0.56 µF
3000
2.8
LDECD3560 - A5 - - 0 22.20
3000
2.8
40.30
0.68 µF
1.0 µF
1.2 µF
1.5 µF
1.8 µF
2.2 µF
2.7 µF
3.3 µF
3.9 µF
4.7 µF
LDEIG3560 - A5 - - 0
5.5
LDEIF3560 M A0 - - 0
3.4
LDEIH3680 - A5 - - 0
22.20
2250
3.3
LDECD3680 - A5 - - 0 22.20
2250
3.3
LDEDD3680 - A5 - - 0 28.24
1750
4.1
LDEEE3680 - A5 - - 0 60.54 1000
1000
5.2
LDEIG3680 - A0 - - 0
28.24
2250
2.9
LDECE3820 - A5 - - 0 28.24
2250
2.9
LDEDE3820 - A5 - - 0 40.30
1500
2.8
LDEEF3820 - A5 - - 0 60.54 1000
3.9
LDEIH3820 - A5 - - 0
22.20
1750
3.7
LDECD3820 - A0 - - 0 22.20
2250
3.7
LDEDD3820 - A0 - - 0 28.24
1500
4.9
LDEEE3820 - A0 - - 0 50.40 1000
5.7
LDEIG3820 - A0 - - 0
28.24
2250
3.1
LDECE4100 - A5 - - 0 28.24
2250
3.1
LDEDE4100 - A5 - - 0 40.30
1500
3.2
LDEEF4100 - A5 - - 0 60.54
750
4.6
LDEIH4100 - A5 - - 0
22.20
1750
4.4
LDECD4100 - A0 - - 0 22.20
1750
4.4
LDEDD4100 - A0 - - 0 28.24
1500
5.4
*LDEEE4100 - A0 - - 0
28.24
2250
3.6
LDECE4120 - A5 - - 0 28.24
2250
3.6
LDEDE4120 - A5 - - 0 50.40
1500
3.1
LDEEG4120 - A5 - - 0
40.30
1500
3.7
LDEEF4120 - A0 - - 0 60.54
750
5.4
LDEIH4120 - A0 - - 0
750
5.7
LDEIH4150 M A0 - - 0
50.40
0.82 µF
4.4
1000
50.40
1500
3.1
LDECG4150 - A5 - - 0 50.40
1500
3.1
LDEDG4150 - A5 - - 0 50.40
1500
3.1
LDEEG4150 - A5 - - 0
28.24
1750
4.3
LDECE4150 - A0 - - 0 28.24
1750
4.3
LDEDE4150 - A0 - - 0 40.30
1250
4.5
LDEEF4150 - A0 - - 0 60.54
50.40
1500
3.4
LDECG4180 - A5 - - 0 50.40
1500
3.4
LDEDG4180 - A5 - - 0 50.40
1500
3.4
LDEEG4180 - A5 - - 0
28.24
1500
5.1
LDECE4180 - A0 - - 0 28.24
1500
5.1
LDEDE4180 - A0 - - 0 40.30
1000
5.4
LDEEF4180 - A0 - - 0
50.40
1250
4.1
LDECG4220 - A5 - - 0 50.40
1250
4.1
LDEDG4220 - A5 - - 0 50.40
1250
4.1
LDEEG4220 - A5 - - 0
40.30
1500
3.3
LDECF4220 - A0 - - 0 40.30
1500
3.3
LDEDF4220 - A0 - - 0 40.30
1000
5.6
*LDEEF4220 - A0 - - 0
50.40
1000
4.9
LDECG4270 - A5 - - 0 50.40
1000
4.9
LDEDG4270 - A5 - - 0 60.54
1000
3.3
LDEEH4270 - A5 - - 0
40.30
1250
4.0
LDECF4270 - A0 - - 0 40.30
1250
4.0
LDEDF4270 - A0 - - 0 50.40
1000
4.9
LDEEG4270 - A0 - - 0
60.54
1000
3.9
LDECH4330 - A5 - - 0 60.54
1000
3.9
LDEDH4330 - A5 - - 0 60.54
1000
3.9
LDEEH4330 - A5 - - 0
40.30
1000
4.7
LDECF4330 - A0 - - 0 40.30
1000
4.7
LDEDF4330 - A0 - - 0 50.40
1000
5.7
LDEEG4330 - A0 - - 0
60.54
750
4.5
LDECH4390 - A5 - - 0 60.54
750
4.5
LDEDH4390 - A5 - - 0 60.54
750
4.5
LDEEH4390 - A5 - - 0
40.30
1000
5.5
LDECF4390 - A0 - - 0 40.30
1000
5.5
LDEDF4390 - A0 - - 0
750
5.3
LDEEH4470 - A5 - - 0
60.54
750
5.3
LDECH4470 - A5 - - 0 60.54
750
5.3
LDEDH4470 - A5 - - 0 60.54
50.40
1250
4.1
LDECG4470 - A0 - - 0 50.40
1250
4.1
LDEDG4470 - A0 - - 0
0.39 µF
0.47 µF
0.56 µF
0.68 µF
0.82 µF
1.0 µF
1.2 µF
1.5 µF
1.8 µF
2.2 µF
2.7 µF
3.3 µF
3.9 µF
4.7 µF
Tolerance - Standard: K = ±10%; M = ±20%;
(J = ±5% available upon request and review of project/application)
Packaging - N = Taped; A to Z = Special;
Internal use
* only K and M tolerances available
Size code
18.12
4.7 +0.3
- 0.2
22.20
28.24
L (mm)
12.10
3.3 +0.3
- 0.1
6.0 ± 0.3
7.3 ± 0.4
10.5 ± 0.4 13.0 ± 0.4 15.5 ± 0.4
W (mm)
2.5 ± 0.3
3.3 ± 0.3
5.0 ± 0.4
6.1 ± 0.4
7.9 ± 0.5
P/N 5 digit
B
C
D
E
F
th
40.30
50.40
60.54
10.4 ± 0.5 13.7 ± 0.5
G
7
H
07/2008
SMD Film Capacitors
LDE series - PEN dielectric rohs 6
ree
F
ead
L
High voltage (capacitance range: 1000 pF to 0.47 µF)
Standard and miniature versions
400 VDC / 160 VAC **
Rated
cap.
Pcs
per
reel
630 VDC / 200 VAC
Size
code
Pcs
per
reel
Hmax
[mm]
1000 pF
22.20
3000
1200 pF
22.20
3000
1500 pF
22.20
1800 pF
22.20
2200 pF
1000 VDC / 250 VAC
Rated
cap.
Part number
Size
code
Pcs
per
reel
Hmax
[mm]
Part number
1.9
LDEPD1100 - A5 - - 0
22.20
3000
1.9
LDEQD1100 - A5 - - 0
1000 pF
2.0
LDEPD1120 - A5 - - 0
22.20
3000
2.0
LDEQD1120 - A5 - - 0
1200 pF
3000
2.3
LDEPD1150 - A5 - - 0
22.20
3000
2.3
LDEQD1150 - A5 - - 0
1500 pF
3000
2.5
LDEPD1180 - A5 - - 0
22.20
3000
2.5
LDEQD1180 - A5 - - 0
1800 pF
22.20
3000
2.0
LDEPD1220 - A5 - - 0
22.20
3000
2.0
LDEQD1220 - A5 - - 0
2200 pF
2700 pF
22.20
3000
2.3
LDEPD1270 - A5 - - 0
22.20
3000
2.3
LDEQD1270 - A5 - - 0
2700 pF
3300 pF
22.20
3000
2.6
LDEPD1330 - A5 - - 0
22.20
3000
2.6
LDEQD1330 - A5 - - 0
3300 pF
3900 pF
22.20
3000
1.9
LDEPD1390 - A5 - - 0
22.20
2250
3.0
LDEQD1390 - A5 - - 0
3900 pF
4700 pF
22.20
3000
2.0
LDEPD1470 - A5 - - 0
22.20
2250
3.4
LDEQD1470 - A5 - - 0
4700 pF
5600 pF
22.20
3000
2.0
LDEPD1560 - A5 - - 0
22.20
1750
3.9
LDEQD1560 - A5 - - 0
5600 pF
6800 pF
22.20
3000
2.3
LDEPD1680 - A5 - - 0
22.20
1750
4.4
LDEQD1680 - A5 - - 0
6800 pF
8200 pF
22.20
3000
2.6
LDEPD1820 - A5 - - 0
28.24
2250
2.9
LDEQE1820 - A5 - - 0
8200 pF
0.010 µF
22.20
2250
3.0
LDEPD2100 - A5 - - 0
28.24
2250
3.4
LDEQE2100 - A5 - - 0
0.010 µF
0.012 µF
22.20
2250
3.4
LDEPD2120 - A5 - - 0
28.24
1750
4.0
LDEQE2120 - A5 - - 0
0.012 µF
Size
code
Hmax
[mm]
Part number
0.015 µF
22.20
3000
2.1
LDEMD2150 - A5 - - 0
22.20
1750
4.0
LDEPD2150 - A5 - - 0
28.24
1500
4.9
LDEQE2150 - A5 - - 0
0.015 µF
0.018 µF
22.20
3000
2.2
LDEMD2180 - A5 - - 0
22.20
1750
4.4
LDEPD2180 - A5 - - 0
28.24
1500
5.4
LDEQE2180 - A5 - - 0
0.018 µF
0.022 µF
22.20
3000
2.5
LDEMD2220 - A5 - - 0
28.24
2250
3.4
LDEPE2220 - A5 - - 0
40.30
1500
3.4
LDEQF2220 - A5 - - 0
0.022 µF
0.027 µF
22.20
2250
2.9
LDEMD2270 - A5 - - 0
28.24
1750
4.0
LDEPE2270 - A5 - - 0
40.30
1250
4.1
LDEQF2270 - A5 - - 0
0.027 µF
0.033 µF
22.20
2250
3.4
LDEMD2330 - A5 - - 0
28.24
1500
4.7
LDEPE2330 - A5 - - 0
40.30
1000
4.9
LDEQF2330 - A5 - - 0
0.033 µF
0.039 µF
22.20
1750
3.8
LDEMD2390 - A5 - - 0
28.24
1500
5.3
LDEPE2390 - A5 - - 0
50.40
1500
3.5
LDEQG2390 - A5 - - 0
0.039 µF
0.047 µF
22.20
1750
4.4
LDEMD2470 - A5 - - 0
40.30
1500
3.4
LDEPF2470 - A5 - - 0
50.40
1250
4.1
LDEQG2470 - A5 - - 0
0.047 µF
0.056 µF
28.24
2250
3.5
LDEME2560 - A5 - - 0
40.30
1250
3.9
LDEPF2560 - A5 - - 0
50.40
1000
4.7
LDEQG2560 - A5 - - 0
0.056 µF
0.068 µF
28.24
1750
4.1
LDEME2680 - A5 - - 0
40.30
1250
4.5
LDEPF2680 - A5 - - 0
50.40
1000
5.5
LDEQG2680 - A5 - - 0
0.068 µF
0.082 µF
28.24
1500
4.7
LDEME2820 - A5 - - 0
40.30
1000
5.4
LDEPF2820 - A5 - - 0
60.54
1000
4.2
LDEQH2820 - A5 - - 0
0.082 µF
28.24
1500
5.4
LDEME3100 - A5 - - 0
50.40
1250
3.9
LDEPG3100 - A5 - - 0
60.54
750
4.8
LDEQH3100 - A5 - - 0
0.10 µF
40.30
1000
5.5
*LDEPF3100 - A0 - - 0
0.10 µF
0.12 µF
40.30
1500
3.6
LDEMF3120 - A5 - - 0
50.40
1250
4.4
LDEPG3120 - A5 - - 0
0.15 µF
40.30
1250
4.4
LDEMF3150 - A5 - - 0
50.40
1000
5.3
LDEPG3150 - A5 - - 0
0.12 µF
0.15 µF
0.18 µF
40.30
1000
5.1
LDEMF3180 - A5 - - 0
60.54
1000
4.2
LDEPH3180 - A5 - - 0
0.18 µF
0.22 µF
50.40
1250
3.8
LDEMG3220 - A5 - - 0
60.54
750
4.9
LDEPH3220 - A5 - - 0
0.22 µF
0.27 µF
50.40
1000
4.7
LDEMG3270 - A5 - - 0
60.54
750
5.7
*LDEPH3270 - A5 - - 0
0.27 µF
0.33 µF
50.40
1000
5.6
LDEMG3330 - A5 - - 0
0.33 µF
0.39 µF
60.54
1000
4.2
LDEMH3390 - A5 - - 0
0.39 µF
0.47 µF
60.54
750
4.8
LDEMH3470 - A5 - - 0
0.47 µF
Tolerance - Standard: K = ±10%; M = ±20%;
(J = ±5% available upon request and review of project/application)
Packaging - N = Taped; A to Z = Special;
Internal use
* only K and M tolerances available
** up to 230 VAC for maximum 30 minutes
Suitable for
xDSL
ITU compliant version available upon request
Size code
22.20
28.24
L (mm)
6.0 ± 0.3
7.3 ± 0.4
10.5 ± 0.4 13.0 ± 0.4 15.5 ± 0.4
W (mm)
5.0 ± 0.4
6.1 ± 0.4
7.9 ± 0.5
P/N 5 digit
D
E
F
th
07/2008
40.30
50.40
60.54
10.4 ± 0.5 13.7 ± 0.5
G
H
8
SMD Film Capacitors
LDE series - PEN dieletric RoHS 6 - technical data
Plates
Winding
Terminations
Marking
Climatic category
Aluminium layer deposited by evaporation under vacuum.
Non inductive - Stacked technology.
Four layers: aluminium, brass, nickel, pure tin.
On packaging only.
55 / 125 / 56
Dissipation (A.C. applications)
Electrical data
Operating temperature
range
-55 to +125 °C
Rated voltage (VR)
50 - 63 - 100 - 250 - 400 - 630 - 1000 VDC
Category voltage (VC)
VC = VR up to 105 °C. For temperatures
between 105 and 125 °C a decreasing
factor of 1.25% per degree °C has to be
applied on the rated voltage (D.C. and
A.C.)
Size range
When a capacitor is used in A.C. applications at high frequency,
the consequent internal heating may cause the risk of smoke or
fire. This is due to the high current flowing through the capacitor’s
Equivalent Series Resistance.
The formula to calculate the maximum power [W] dissipated by the
capacitor is the following:
Pc max =
12.06 to 60.54
(customized sizes available upon request)
Capacitance range
1000 pF to 4.7 μF
Capacitance values
E12 series
Capacitance
tolerances
Standard: K = ± 10 % M = ± 20 %;
(J = ±5% available upon request and
review of project/application)
Dissipation factor (tgδ)
≤ 0.8 % (T = 25 ± 5 °C; f = 1 kHz)
Dielectric absorption
0.8%
Insulation resistance
≥ 1 GΩ for C ≤ 0.33 μF
≥ 400 s for C > 0.33 μF
Test conditions:
T = 25 ± 5 °C; charging time: 1 min.
Charging voltage:
10 VDC for VR < 100 VDC
100 VDC for VR ≥ 100 VDC
Surge voltage test
1.4 x VR (2 s; T = 25 ± 5 °C)
for VR ≤ 630 VDC
1.5 x VR (2 s; T = 25 ± 5 °C)
for VR = 1000 VDC
Maximum dv / dt
100 V / μs for VR ≤ 630 VDC
300 V / μs for VR = 1000 VDC
N
=
∑
N
2
∑ Vrms
_ i * 2�fi * C * tgδ max (fi ) =
i=1
2
I rms _ i
i=1 2�fi * C
* tg δ max (fi )
(N: number of significant harmonics)
The formula to calculate the maximum power [W] that can be
dissipated by the capacitor is the following:
It must be: Pcmax ≤ Pclim
Please refer to the table and graph below for ∆Tlim and Rth values
(Th: maximum ambient temperature surrounding the capacitor or
hottest contact point - i.e. tracks - whichever is higher, in the worst
operating conditions in °C)
Size
H
max
[mm]
Tests and performances
Damp heat
(40°C/93% R.H.; 56 days)
│∆C/C│≤ 7%;│∆tgδ│≤ 50 x 10 ;
IR ≥ 50% of the limit value
Endurance
(125 °C; 2000 h; 1.25 x VC)
│∆C/C│≤ 5%;│∆tgδ│≤ 50 x 10-4;
IR ≥ 50% of the limit value
Rapid change of
temperature
(1h at -55 °C;1h at
+125 °C; 1000 cycles)
│∆C/C│≤ 5%
│∆tgδ│≤ 50 x 10-4
IR ≥ limit value
No mechanical damage
Reflow
(as per reflow
recommendations, see
page 14)
│∆C/C│≤ 3%
│∆tgδ│≤ 50 x 10-4
IR ≥ limit value
No mechanical damage
Bending
(1 to 6 mm deflection)
│∆C/C│≤ 1%
No visible damage on the terminations
(pealing) neither on the body (cracking)
Long term stability
(2 years)
│∆C/C│≤ 3% for sizes ≤ 22.20
│∆C/C│≤ 2% for sizes > 22.20
Reliability
(REF MIL HDBK 217)
Failure rate ≤ 1 Fit
1 Fit = 10-9 failures / (components * hours)
Rth
[°C/W]
-4
Size
H
max
[mm]
Rth
[°C/W]
9
12.06
12.10
18.12
22.20
1.2
2.1
1.7 2.6
2.3
3.3
4.4
3.5
4.5
5.4
175
165
157 151
135
128
122
114
108
103
40.30
28.24
50.40
60.54
3.6
4.5
5.5
3.6
4.5
5.7
3.6
4.5
5.7
93
88
84
75
70
66
58
55
52
07/2008
SMD Film Capacitors
LDE series - pen dielectric rohs 6
maximum vrms and irms vs. frequency (50 - 63 - 100 - 250 vdc rated voltage)
(Sinusoidal wave form / th* ≤ 85°C)
Note: measurements performed in free air condition
*Th: maximum ambient temperature surrounding the capacitor or hottest contact point - i.e. tracks - whichever is higher, in the worst operating conditions in °C
07/2008
10
SMD Film Capacitors
LDE series - pen dielectric rohs 6
maximum vrms and irms vs. frequency (400 - 630 - 1000 vdc rated voltage)
(Sinusoidal wave form / th* ≤ 85°C)
Note: measurements performed in free air condition
*Th: maximum ambient temperature surrounding the capacitor or hottest contact point - i.e. tracks - whichever is higher, in the worst operating conditions in °C
11
07/2008
SMD Film Capacitors
LDB series - pps dielectric rohs 6
ree
F
ead
L
Standard version
Rated
capacitance
16 VDC
50 VDC
Size code
Pcs per
reel
Hmax
[mm]
Part number
Rated
capacitance
3300 pF
12.06
3000
1.1
LDBCA1330 - C5 - -
3300 pF
3900 pF
12.06
3000
1.1
LDBCA1390 - C5 - -
3900 pF
4700 pF
12.06
3000
1.1
LDBCA1470 - C5 - -
4700 pF
5600 pF
12.06
3000
1.1
LDBCA1560 - C5 - -
5600 pF
6800 pF
12.06
3000
1.1
LDBCA1680 - C5 - -
6800 pF
8200 pF
12.06
3000
1.1
LDBCA1820 - C5 - -
8200 pF
0.010 µF
12.06
3000
1.1
LDBCA2100 - C5 - -
0.010 µF
Size code
Pcs per
reel
Hmax
[mm]
Part number
0.012 µF
12.06
3000
1.1
LDBAA2120 - C5 - -
12.06
3000
1.1
LDBCA2120 - C5 - -
0.012 µF
0.015 µF
12.06
3000
1.1
LDBAA2150 - C5 - -
12.10
2250
1.4
LDBCB2150 - C5 - -
0.015 µF
0.018 µF
12.06
3000
1.1
LDBAA2180 - C5 - -
12.10
2250
1.5
LDBCB2180 - C5 - -
0.018 µF
0.022 µF
12.06
3000
1.1
LDBAA2220 - C5 - -
12.10
2250
1.5
LDBCB2220 - C5 - -
0.022 µF
0.027 µF
12.06
3000
1.1
LDBAA2270 - C5 - -
12.10
2250
1.5
LDBCB2270 - C5 - -
0.027 µF
0.033 µF
12.06
3000
1.1
LDBAA2330 - C5 - -
12.10
2250
1.7
LDBCB2330 - C5 - -
0.033 µF
0.039 µF
12.06
3000
1.2
LDBAA2390 - C5 - -
12.10
2250
1.9
LDBCB2390 - C5 - -
0.039 µF
0.047 µF
12.06
3000
1.3
LDBAA2470 - C5 - -
12.10
2250
2.3
LDBCB2470 - C5 - -
0.047 µF
0.056 µF
12.10
2250
1.7
LDBAB2560 - C5 - -
18.12
4000
1.7
LDBCC2560 - C5 - -
0.056 µF
0.068 µF
12.10
2250
1.7
LDBAB2680 - C5 - -
18.12
4000
1.7
LDBCC2680 - C5 - -
0.068 µF
0.082 µF
12.10
2250
1.7
LDBAB2820 - C5 - -
18.12
4000
1.7
LDBCC2820 - C5 - -
0.082 µF
0.10 µF
12.10
2250
2.0
LDBAB3100 - C5 - -
18.12
3000
2.0
LDBCC3100 - C5 - -
0.10 µF
Tolerance - G = ±2%; J = ±5%;
Packaging - N = Taped; A to Z = Special;
Internal use
±2% Tolerance
available
Size code
L (mm)
12.06
3.3 +0.3
- 0.1
12.10
3.3 +0.3
- 0.1
18.12
4.7 +0.3
- 0.2
W (mm)
1.7 ± 0.2
2.5 ± 0.3
3.3 ± 0.3
P/N 5 digit
A
B
C
th
07/2008
12
SMD Film Capacitors
LDB series - pps dielectric rohs 6 - technical data
Plates
Aluminium layer deposited by evaporation under vacuum.
Winding
Non inductive - Stacked technology.
Terminations
Four layers: aluminium, brass, nickel, pure tin.
Marking
On packaging only.
Climatic category
55 / 125 / 56
Electrical data
Operating temperature range
-55 to + 125 °C
Rated voltage (VR)
16 - 50 VDC
Category voltage (VC)
VC = VR up to 105 °C.
For temperatures between 105 and 125 °C a decreasing factor of
1.25 % per degree °C has to be applied on the D.C. rated voltage
Size range
12.06 to 18.12
Capacitance range
3300 pF to 0.1 μF
Capacitance values
E12 series
Capacitance tolerances
± 2 % (G); ± 5 % (J)
Dissipation factor (tgδ)
≤ 0.6 % (T = 25 ± 5 °C; f = 1 kHz)
Dielectric absorption
0.02%
Insulation resistance
≥ 3 GΩ
Test conditions:
T = 25 ± 5 °C; charging time: 1 min.
Charging voltage:
10 VDC for VR = 16 VDC
50 VDC for VR = 50 VDC
Surge voltage test
1.75 x VR (5 s; T = 25 ± 5 °C)
Tests and performances
Damp heat
(40 °C / 93% R.H.; 56 days)
│∆C/C│≤ 5%;│∆tgδ│≤ 30 x 10-4;IR ≥ 50% of the limit value
Endurance
(125 °C; 2000 h; 1.25 x VC)
│∆C/C│≤ 3%;│∆tgδ│≤ 30 x 10-4;IR ≥ 50% of the limit value
│∆C/C│≤ 3%
Rapid change of temperature
(1h at -55 °C;1h at +125 °C; 1000 cycles)
│∆tgδ│≤ 50 x 10-4
IR ≥ limit value
No mechanical damage
Reflow (as per reflow recommendations, see
page 14)
│∆C/C│≤ 3% ;│∆tgδ│≤ 50 x 10-4 ; IR ≥ limit value
No mechanical damage
Bending
(1 to 6 mm deflection)
│∆C/C│≤ 1%
No visible damage on the terminations (pealing) neither on the body
(cracking)
Long term stability
(2 years)
│∆C/C│≤ 1%
Reliability
(REF. MIL HDBK 217)
Failure rate ≤ 1 Fit
1 Fit = 10-9 failures / (components * hours)
13
07/2008
SMD Film Capacitors
Soldering recommendations and cautions
Reflow recommendations
Preheating
Maximum preheating time: 180 s
Minimum temperature: 150 °C
Maximum temperature: 200 °C
Maximum time within Tmax and Tmax - 5 °C (∆T5):
30 s (Tmax ≤ 250 °C)
10 s (250 °C < Tmax ≤ 255 °C *)
Maximum time over 217 °C (∆T217): 150 s
Maximum temperature on the component’s body (Tmax):
Maximum temperature ramp rate:
3 °C / s (heating)
6 °C / s (cooling)
Capacitor volume [mm3]
< 350
350 - 2000
> 2000
Capacitor
Hmax [mm]
< 1.6
255 °C *
255 °C *
255 °C *
1.6 - 2.5
255 °C *
250 °C
245 °C
> 2.5
250 °C
245 °C
245 °C
Second reflow
if two reflow processes are needed, be sure that, before
the second reflow, the temperature on the capacitor’s
surface is lower than 50 °C.
in line with JEDEC STD 020D ed. June 2007 with some limitations
* For LDB series this value is 260 °C.
Reflow temperature profile
Linear profiles are also allowed (if in line with the reflow recommendations)
Landing areas and solder paste suggestions
Size **
A [mm]
B [mm]
C [mm]
D [mm]
12.06
1.5
1.1
2.3
4.5
12.10
2.3
1.1
2.3
4.5
18.12
3.0
1.7
3.1
6.5
22.20
4.6
2.1
3.9
8.1
28.24
5.7
2.3
5.3
9.9
40.30
7.4
2.6
8.2
13.4
50.40
9.6
2.6
10.7
15.9
60.54
12.6
2.6
13.2
18.4
** For customized sizes, specific landing areas suggestions are available
These new landing area dimensions have the aim of taking full We suggest to use a Sn / Ag / Cu solder paste (suggested
advantage of the new RoHS 6 terminations design.
thickness: 0.10 ÷ 0.15 mm).
The preceding layout (2004 Catalogue) is therefore to be If a NOT Lead Free solder paste is used, a minimum peak
considered still valid, although not optimal for RoHS 6.
temperature of 210 °C on the component’s body is suggested.
07/2008
14
SMD Film Capacitors
Soldering recommendations and cautions
Flux / Cleaning / Storage and Moisture
Flux suggestions
We suggest to use a no-clean flux with a halogen
content lower than 0.1%.
Cleaning suggestions
To clean the PCB assembly we suggest to use a suitable
solvent like Isopropyl Alcohol, deionized water or neutral
pH detergents. Solvents like Toluene, Xylene and
Trichloroethylene should not be used.
Storage and moisture recommendations
Arcotronics SMD Film Capacitors are supplied in a MBB (Moisture Barrier Bag) Class 1. We can guarantee a 24 months
shelf life (temperature ≤ 40 °C / relative humidity ≤ 90%).
After the MBB has been opened, components may stay in areas with controlled temperature and humidity (temperature
≤ 30 °C / relative humidity ≤ 60%) for 168 hours (rated voltage ≤ 100 VDC) or 696 hours (rated voltage > 100 VDC).
For longer periods of time and / or higher temperature and / or higher relative humidity values, it is absolutely necessary
to protect the components against humidity. If the reel inside the MBB is partially used, Arcotronics recommends to re-use
the same MBB or to avoid areas without controlled temperature and humidity (see above). If the above conditions are not
respected, components require a baking (minimum time: 48 hours at 55 ± 5 °C) before the reflow.
Manual assembly recommendations
If PCBs are assembled manually, care must be taken to
avoid any mechanical damage to the components.
Our recommendations are the following (see Fig. 1):
1) when using tweezers, the components should be
gripped across the two terminations (A);
2) avoid any contact with the two cutting surfaces (C);
3) a vacuum pen is recommended on the top and
bottom surfaces (B).
Fig. 1
Manual soldering recommendations
LDE and LDB series have been designed for Surface Mount Technology, pick & place machines and reflow soldering
systems. Using a manual soldering iron, issues may occur because the typical temperature for manual soldering is
around 350 °C. Therefore please pay careful attention:
- never touch the capacitor body with the sodering iron but rather touch the soldering iron and the end termination with the
tin wire edge (see Fig. 2);
- if the soldering iron is equipped with a temperature controller device:
set the temperature to 250 ± 3 °C and proceed as per Fig. 2 (the maximum soldering time, on both terminations, is 5 s);
- if the soldering iron is NOT equipped with a temperature controller device:
this is the worst situation. The following are a few practical suggestions but, clearly, the operator’s experience is
extremely important:
1) proceed as per Fig. 2;
2) as soon as the tin wire starts melting, move the soldering iron away as quickly as possible;
3) wait a few seconds and check that the soldering joint has been properly created;
- if the soldering iron is equipped with a hot air flow device:
set the hot air temperature to 250 ± 3 °C and do not send the hot air directly onto the capacitor plastic body.
In this situation, the operator’s experience is very important;
- in any case, avoid mass-mounting SMD Film Capacitors manually.
Fig. 2
15
07/2008
SMD Film Capacitors
Production process basic suggestions
In case of:
no solder joint on one
end termination
no solder joint on both
end terminations
capacitor’s body
mechanical
deformation
capacitance drop
(up to 20%)
capacitance drop
(over 20%)
Typical cause
Typical solution
landing area dimensions
see landing areas suggestions, page 14
solder paste quality
see solder paste suggestions, page 14
not-uniform solder paste thickness on the
landing areas
set the dispensing solder paste machine properly
wrong position of the capacitor on the
landing areas
set the pick & place machine properly
thermal profile parameters
see reflow recommendations, page 14
bad temperature distribution in the reflow
oven
check the reflow oven temperature distribution
and variations
landing area dimensions
see landing areas suggestions, page 14
solder paste quality
see solder paste suggestions, page 14
no solder paste on the landing areas
set the dispensing solder paste machine properly
thermal profile parameters
see reflow recommendations, page 14
bad temperature distribution in the reflow
oven
check the reflow oven temperature distribution
and variations
oxidated end terminations
see moisture recommendations, page 15
too long time over 217 °C
see reflow recommendations, page 14
too long time within Tmax and Tmax - 5 °C
see reflow recommendations, page 14
too high temperature ramp rate
see reflow recommendations, page 14
capacitor damaged by a soldering iron
see manual soldering recommendations, page 15
too long time over 217 ° C
see reflow recommendations, page 14
too long time within Tmax and Tmax - 5 °C
see reflow recommendations, page 14
too high temperature ramp-up rate
see reflow recommendations, page 14
capacitor damaged by a soldering iron
see manual soldering recommendations, page 15
capacitor damaged by a soldering iron
see manual soldering recommendations, page 15
Note: small fissures on the capacitor’s cutting surface are actually slight detachments of two adjacent metallized film
layers and have to be considered only as an aesthetic issue related to the SMD Film Capacitors’ manufacturing
process and technology.
Therefore, small fissures on SMD Film Capacitors are not comparable to cracks on SMD Ceramics.
Fissures do not influence in anyway SMD Film Capacitors’ reliability.
07/2008
16