Film Chip Capacitors PPS DIELECTRIC – CB Series GENERAL DESCRIPTION Film chip capacitor using a naked and stacked construction with metallized PolyPhenylene Sulfide film (PPS) ADVANTAGES • • • • APPLICATIONS General purpose function in low voltage applications: • Filtering, coupling, decoupling • Time-constant • Oscillation timing circuit Typical applications would be: • Automotive (navigation system ...) • Telecom (GSM PLL circuit, ADSL system ...) • Industrial (Lighting and power supplies...) • • • • • Applicable for both flow and reflow soldering. Very constant Capacitance value with temperature. Low dielectric absorption. The intrinsic elasticity of the dielectric film provides an excellent compatibility of the capacitor with all types of material for printed circuit boards. Excellent thermal shock resistance. Low dissipation factor, ESR and ESL. No piezoelectric effect. Available in tape and reel suitable for automatic placement. Non-polar construction. Outer Layer Termination Plating : 100% matte Sn Ni Barrier Under Termination Silver Epoxy Resin Brass Active Layers : PPS dielectric PERFORMANCE CHARACTERISTICS Climatic Category Capacitance Range Tolerance on CR Nominal Voltages Test Voltage Soldering methods Tangent of Loss Angle at 1kHz (DF) Insulation resistance minimum: IR Temperature range A.C. applications 55/125/56 1nF to 180nF ±2%, ±5%, ±10% 16Vdc to 50Vdc 1.4Vr 2 sec. at 25°C IR vapor phase reflow < 50 x 10-4 for C ≤ 0.33μF IR > 1000 MΩ at 20°C for 1 min. charge at 10VDC for VR < 100VDC -55°C to 125°C for high frequency A.C. application please check with AVX No self-healing properties 39 Film Chip Capacitors PPS DIELECTRIC – CB Series CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) W H T millimeters (inches) L VOLTAGE Vdc: 16V Vac: 10V Capacitance Range (CR) Ordering Code 0.001μF CB018B0102+ -- 0.0012 CB018B0122+ -- 0.0015 CB018B0152+ -- 0.0018 CB018B0182+ -- 0.0022 CB018B0222+ -- 0.0027 CB018B0272+ -- 0.0033 CB018B0332+ -- 0.0047 CB018B0472+ -- 0.0056 CB018B0562+ -- 0.0068 CB018B0682+ -- 0.0082 CB018B0822+ -- 0.010μF CB018B0103+ -- 0.012 CB018B0123+ -- 0.015 CB018B0153+ -- 0.018 CB018B0183+ -- 0.022 CB018B0223+ -- 0.027 CB018B0273+ -- 0.033 CB018B0333+ -- 0.039 CB018B0393+ -- 0.047 CB028B0473+ -- 0.056 CB028B0563+ -- 0.068 CB028B0683+ -- 0.082 CB028B0823+ -- L 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) Chip Dimensions *Tolerances (page 6) W H max 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 1.60 1.15 (0.063) (0.045) 2.50 1.80 (0.098) (0.071) 2.50 1.80 (0.098) (0.098) 2.50 1.80 (0.098) (0.071) 2.50 1.80 (0.098) (0.071) Tape Dimensions T 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) For other Values: upon request Replace the + by the tolerance code: G = 2%, J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BA or BC = tape & reel 40 W 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) P1 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) K0 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.90 (0.075) 1.90 (0.075) 1.90 (0.075) 1.90 (0.075) Reel Dimensions A 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) W1 W2 max 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) Packaging Unit Reel Pkg Code Bulk 2000 Reel 3900 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 2500 BA 2000 2500 BA 2000 2500 BA 2000 2500 BA BA Film Chip Capacitors PPS DIELECTRIC – CB Series CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) W H T millimeters (inches) L VOLTAGE Vdc: 16V Vac: 10V Capacitance Range (CR) Ordering Code 0.100μF CB028B0104+ -- 0.120 CB038B0124+ -- 0.150 0.180 CB038B0154+ -- CB038B0184+- - 0.001μF CB018D0102+ -- 0.0012 CB018D0122+ -- 0.0015 CB018D0152+ -- 0.0018 CB018D0182+ -- 0.0022 CB018D0222+ -- 0.0027 CB018D0272+ -- 0.0033 CB018D0332+ -- 0.0047 CB018D0472+ -- 0.0056 CB018D0562+ -- 0.0068 CB018D0682+ -- 0.0082 CB018D0822+ -- 0.010μF CB018D0103+ -- 0.012 CB028D0123+ -- 0.015 CB028D0153+ -- 0.018 CB028D0183+ -- 0.022 CB028D0223+ -- L 3.30 (0.130) 4.50 (0.177) 4.50 (0.177) 4.50 (0.177) 4.50 (0.177) 4.50 (0.177) 4.50 (0.177) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) Chip Dimensions *Tolerances (page 6) W H max 2.50 2.10 (0.098) (0.083) 3.20 2.30 (0.126) (0.091) 3.20 2.30 (0.126) (0.091) 3.20 2.30 (0.126) (0.091) 3.20 2.30 (0.126) (0.091) 3.20 2.50 (0.126) (0.098) 3.20 2.50 (0.126) (0.098) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 2.50 (0.098) 2.50 (0.098) 2.50 (0.098) 2.50 (0.098) 1.15 (0.045) 1.15 (0.045) 1.15 (0.045) 1.15 (0.045) 1.15 (0.045) 1.15 (0.045) 1.15 (0.045) 1.15 (0.045) 1.15 (0.045) 1.15 (0.045) 1.15 (0.045) 1.15 (0.045) 1.80 (0.071) 1.80 (0.071) 1.80 (0.071) 1.80 (0.071) Tape Dimensions T 0.50 (0.020) 0.60 (0.024) 0.60 (0.024) 0.60 (0.024) 0.60 (0.024) 0.60 (0.024 ) 0.60 (0.024 ) W 8.00 (0.315) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) For other Values: upon request Replace the + by the tolerance code: G = 2%, J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BA or BC = tape & reel P1 K0 4.00 2.33 (0.158) (0.092) 8.00 2.60 (0.315) (0.102) 8.00 2.60 (0.315) (0.102) 8.00 2.60 (0.315) (0.102) 8.00 2.60 (0.315) (0.102) 8.00 2.60 (0.315) (0.102) 8.00 2.60 (0.315) (0.102) VOLTAGE Vdc: 50V 4.00 1.20 (0.158) (0.047) 4.00 1.20 (0.158) (0.047) 4.00 1.20 (0.158) (0.147) 4.00 1.20 (0.158) (0.047) 4.00 1.20 (0.158) (0.047) 4.00 1.20 (0.158) (0.047) 4.00 1.20 (0.158) (0.047) 4.00 1.20 (0.158) (0.047) 4.00 1.20 (0.158) (0.047) 4.00 1.20 (0.158) (0.047) 4.00 1.20 (0.158) (0.047) 4.00 1.20 (0.158) (0.047) 4.00 1.90 (0.158) (0.075) 4.00 1.90 (0.158) (0.158) 4.00 1.90 (0.158) (0.075) 4.00 1.90 (0.158) (0.075) Reel Dimensions A 180 (7.087) 180 (7.087) 330 (12.99) 180 (7.087) 330 (12.99) 180 (7.09) 330 (12.99) Vac: 40V 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) 180 (7.087) W1 W2 max 8.4 14.4 (0.331) (0.567) 12.4 18.4 (0.488) (0.724) 12.4 18.4 (0.488) (0.724) 12.4 18.4 (0.488) (0.724) 12.4 18.4 (0.488) (0.724) 12.4 18.4 (0.488) (0.724) 12.4 18.4 (0.488) (0.724) 8.40 (0.331) 8.40 (0.331) 8.40 (0.331) 8.40 (0.331) 8.40 (0.331) 8.40 (0.331) 8.40 (0.331) 8.40 (0.331) 8.40 (0.331) 8.40 (0.331) 8.40 (0.331) 8.40 (0.331) 8.40 (0.331) 8.40 (0.331) 8.40 (0.331) 8.40 (0.331) 14.4 (0.567) 14.4 (0.567) 14.4 (0.567) 14.4 (0.567) 14.4 (0.567) 14.4 (0.567) 14.4 (0.567) 14.4 (0.567) 14.4 (0.567) 14.4 (0.567) 14.4 (0.567) 14.4 (0.567) 14.4 (0.567) 14.4 (0.567) 14.4 (0.567) 14.4 (0.567) Packaging Unit Reel Pkg Code Bulk 2000 Reel 2000 1500 900 BA 1500 3600 BC 1500 900 BA 1500 3600 BC 1500 900 BA 1500 3600 BC 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 3900 BA 2000 2500 BA 2000 2500 BA 2000 2500 BA 2000 2500 BA BA 41 Film Chip Capacitors PPS DIELECTRIC – CB Series CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) W H T millimeters (inches) L VOLTAGE Vdc: 50V Vac: 40V Capacitance Range (CR) Ordering Code 0.027 CB028D0273+ -- 0.033 CB028D0333+ -- 0.039 CB028D0393+ -- 0.047 CB038D0473+ -- 0.056 0.068 0.082 0.100μF CB038D0563+ -- CB038D0683+ -- CB038D0823+ -- CB038D0104+ -- L 3.30 (0.130) 3.30 (0.130) 3.30 (0.130) 4.50 (0.1777) 4.50 (0.177) 4.50 (0.177) 4.50 (0.177) 4.50 (0.177) 4.50 (0.177) 4.50 (0.177) 4.50 (0.177) 4.50 (0.177) 4.50 (0.177) Chip Dimensions *Tolerances (page 6) W H max 2.50 2.10 (0.098) (0.083) 2.50 2.10 (0.098) (0.083) 2.50 2.1 (0.098) (0.083) 3.20 2.4 (0.126) (0.095) 3.20 2.4 (0.126) (0.095) 3.20 2.40 (0.126) (0.095) 3.20 2.40 (0.126) (0.095) 3.20 2.40 (0.126) (0.095) 3.20 2.40 (0.126) (0.095) 3.20 2.40 (0.126) (0.095) 3.20 2.40 (0.126) (0.095) 3.20 2.40 (0.126) (0.095) 3.20 2.40 (0.126) (0.095) Tape Dimensions T 0.50 (0.020) 0.50 (0.020) 0.50 (0.020) 0.60 (0.024) 0.60 (0.024) 0.60 (0.024) 0.60 (0.024) 0.60 (0.024) 0.60 (0.024) 0.60 (0.024) 0.60 (0.024) 0.60 (0.024) 0.60 (0.024) For other Values: upon request Replace the + by the tolerance code: G = 2%, J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BA or BC = tape & reel 42 W 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) P1 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) 8.00 (0.315) K0 2.30 (0.091) 2.30 (0.091) 2.30 (0.091) 2.60 (0.102) 2.60 (0.102) 2.60 (0.102) 2.60 (0.102) 2.60 (0.102) 2.60 (0.102) 2.60 (0.102) 2.60 (0.102) 2.60 (0.102) 2.60 (0.102) Reel Dimensions A 180 (7.087) 180 (7.087) 181 (7.087) 180 (7.087) 330 (12.99) 180 (7.087) 330 (12.99) 180 (7.087) 330 (12.99) 180 (7.087) 330 (12.99) 180 (7.087) 330 (12.99) W1 W2 max 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 8.40 14.4 (0.331) (0.567) 12.4 18.4 (0.488) (0.724) 12.4 18.4 (0.488) (0.724) 12.4 18.4 (0.488) (0.724) 12.4 18.4 (0.488) (0.724) 12.4 18.4 (0.488) (0.724) 12.4 18.4 (0.488) (0.724) 12.4 18.4 (0.488) (0.724) 12.4 18.4 (0.488) (0.724) 12.4 18.4 (0.488) (0.724) 12.4 18.4 (0.488) (0.724) Packaging Unit Reel Pkg Code Bulk 2000 Reel 2000 2000 2000 BA 2000 2000 BA 1500 900 BA 1500 3600 BC 1500 900 BA 1500 3600 BC 1500 900 BA 1500 3600 BC 1500 900 BA 1500 3600 BC 1500 900 BA 1500 3600 BC BA Film Chip Capacitors PPS DIELECTRIC – CB Series MOUNTING AND SOLDERING RECOMMENDATIONS SOLDERING PROFILE The capacitors can be mounted using infrared and vapor phase soldering following recommended below. They are NOT suitable for wave soldering. All temperature refer to topside of the package, measured on the package body surface. tp Tp 1206 to 1812 3°C / second max Ramp up Tp - 5ºC TL Ts max Temperature (ºC) Profile Feature Ramp-Up (Ts max to Tp) Preheat - Temperature Min (Ts min) - Temperature Min (Ts max) - Time (ts min to ts max) Time maintained above - Temperature (TL) - Time (tL) Peak temperature (Tp) Time within 5°C of peak temperature (tp) Ramp-Down 150°C 200°C 180 sec. max 217°C 90 sec. max 260°C Ramp down tS 0 10 sec. tL Ts min 30 60 90 120 150 180 210 240 270 300 330 Time (seconds) 6°C / sec. *Reflow soldering referring to JEDEC Standard with some limitations *JEDEC J-Std 020C RECOMMENDED SOLDER PASTE THICKNESS For optimum solderability, the recommended soldering paste thickness: 1206 to 1812 :150 to 200μm C In case of hand soldering, the temperature of the soldering iron should not be above 250°C. Special care must be taken to avoid touching the capacitor body with the iron tip. B PAD DIMENSIONS: millimeters (inches) A Size Code Case Size A B C 01 02 03 1206 1210 1812 1.30 (0.051) 2.00 (0.079) 3.00 (0.118) 1.30 (0.051) 1.30 (0.051) 1.50 (0.059) 2.20 (0.087) 2.20 (0.087) 3.50 (0.137) RECOMMENDED CLEANING OTHER CAUTIONS To clean flux from the PC board assembly, the recommended products are: ethanol, isopropyl alcohol, and deionized water wash. The cleaning products to avoid are: Toluene, Xylene, Trichloroethylene, Terpene Cleaner EC-7, surface active agent. In case of using another solvent, please contact us. Flame retardancy: the dielectric film is not a flame retardant material. Environment: contact us when chips are used in humid or gas atmosphere and /or when using resin. Recommended handling: do not use edged tools, so not to damage the capacitors. TIN WHISKERS TESTS : JEDEC STANDARD NO 22A121 Stress Type Ref. Spec. Temperature cycling JESD22-A104 Ambient Temperature / Humidity Storage High Temperature / Humidity Storage Test Conditions -55°C +85(+10/-0)°C air 5 to 10 minutes soak 3 cycles/hour Analysis Results SEM x 1000 Pass 30+/-2°C - 60+/-3% RH -2000H SEM x 1000 Pass 70+/-5°C - 93+3/-2% RH -1000H SEM x 1000 Pass 43 Film Chip Capacitors PPS DIELECTRIC – CB Series ELECTRICAL CHARACTERISTICS VERSUS TEMPERATURE AND FREQUENCY ELECTRICAL CHARACTERISTICS FREQUENCY CHARACTERISTICS Capacitance Capacitance DC/C (%) 25 3 DC/C = f(F) DC/C (%) 20 2 15 1 10 -75 -50 -25 0 0 25 50 75 100 -1 125 CB01 / 10NF CB01 / 39NF CB02 / 100NF 5 150 0 Temp. (°C) -5 -2 1 10 100 1000 10000 1000 10000 Frequency (kHz) -3 Dissipation Factor Dissipation Factor TGTE (%) 50 TGTE=f(T) 10 TGTE=(10-4) 45 9 40 8 30 7 6 25 5 20 -50 -25 0 CB01 / 10NF CB01 / 39NF CB02 / 100NF 4 15 -75 TGTE = f(F) 3 10 2 5 1 0 25 50 75 100 125 0 150 1 10 100 Frequency (kHz) Temperature (°C) Insulation Resistance Impedance Z (Ohms) 10,000 10000 RIS = f(F) RIS (G.ohm) 1000 Z = f(F) 1,000 100 0.100 CB02 8B 0104 J 10 CB01 / 10NF CB01 / 39NF CB02 / 100NF -75 -50 -25 0.010 1000 0 1 25 50 Temperature (°C) 44 10000 Frequency (kHz) 75 100 125 150 Film Chip Capacitors PPS DIELECTRIC – CB Series RMS VOLTAGE AND CURRENT VERSUS FREQUENCY MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms (for size CB01 to CB03) 1616Vdc Vdc 1616Vdc Vdc 2.0 15 1.8 13 10 1.3 Irms (A) Vrms (volts) 100nF 1.5 100nF 8 1.0 0.8 5 0.5 3 0 1.E+02 0.3 1.E+03 1.E+04 1.E+05 0.0 1.E+02 1.E+06 1.E+03 1.E+04 1.E+05 1.E+06 Frequency (Hz) Frequency (Hz) 5050Vdc Vdc 5050Vdc Vdc 3.0 45 82nF 2.8 40 2.3 30 2.0 Irms (A) Vrms (volts) 2.5 35 25 20 1.8 1.5 1.3 1.0 15 0.8 10 0.5 5 0 1.E+02 82nF 0.3 1.E+03 1.E+04 Frequency (Hz) 1.E+05 1.E+06 0.0 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 Frequency (Hz) 45 Film Chip Capacitors PPS DIELECTRIC – CB Series – RoHS MATERIALS CONTROLLED BY ROHS (PPM BY WEIGHT): Mass / unit (g) Lead Mercury Cadmium CB range RoHS Limit (ppm) Pass/Fail 0 1000 Pass 0 1000 Pass 0 100 Pass Hexavalent Chromium 0 1000 Pass PBB PBDE 0 1000 Pass 0 1000 Pass This product has been tested and found to be compliant with all requirements, provisions, and exemptions of EU Directive 2002/95/EC of the European Parliament and Council of January 27, 2003. On the Restriction of use of certain Hazardous Substances (RoHS) in electrical and electronic equipment and EU Directive 2000/53/EC regarding ELV or End of Life Vehicle. ROHS / ELV STATUS External Plating 100% Matte Sn as standard LEAD-FREE STATUS / MOISTURE SENSITIVITY RANKING Pb Free Reflow Solder compliant, MSL = 2a. Reflow soldering referring to Jedec Standard with some limitations. Additional JESD-97 data to be phased in MSL e3 termination. PRODUCT LABELING: PRODUCT TRACEABILITY: (For informational purposes only to be phased in on reel and container.) Full internal material traceability by reference to unique lot number marked on reel and external package. Pb Free: 46 RoHS Compliant: