Tantalum Surface Mount Capacitors – Low ESR Tantalum Stack MnO2 (TSM) Series Overview The KEMET Tantalum Stack MnO2 (TSM) Series is designed to provide the highest capacitance/voltage ratings in surface mount configuration. KEMET’s T493 COTS Military/Aerospace capacitors are utilized in stacks of 2, 3, 4, and 6 components to achieve a broad range of capacitance and voltage ratings. The T493 COTS series offers component level Weibull grading options, surge current testing options and standard, low, and ultra-low ESR options. All component level lots of this series are conditioned with MIL–PRF–55365 Group A testing. Stacking configurations offer this high reliability product with custom capacitance/voltage solutions and very low ESR options. Note: Custom stacking solutions are available with other KEMET Tantalum Surface Mount Series. Please contact KEMET Product Management for availability. Benefits • • • • • • • • • • • • • High capacitance Surface mountable Capacitance values of 9.4 µF to 2,000 µF Capacitance can be custom specified Voltage ratings of 6 VDC to 50 VDC High volumetric efficiency Ultra-low ESR Surge capability Weibull failure options B and C Operating temperature range of -55˚C to +125˚C Laser-marked case Discrete components EIA standard case sizes (others available) High Temperature lead attach material available (> 260°C) Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Applications Typical applications include decoupling and filtering in a variety of market segments. The T493 COTS stack devices can be utilized in military and aerospace applications. Other KEMET series can be utilized in filtering and decoupling applications to service various market segments. Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2021_TSM • 6/17/2015 1 Tantalum Surface Mount Capacitors – Low ESR Tantalum Stack MnO2 (TSM) Series SPICE For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. Ordering Information T SM 2D Capacitor Class Series Case Size T= Tantalum Stacks MnO2 Cathode 447 K 10 A Capacitance Capacitance Rated Voltage Failure Rate/ Code (pF) Tolerance (VDC) Design 2C, 3C, First two digits K = ±10% 4C, 6C, represent M = ±20% 2D, 3D, significant 4D, 6D, figures. Third 2X, 3X, digit specifies 4X, 6X number of zeros. 006 = 6.3 010 = 10 016 = 16 020 = 20 025 = 25 035 = 35 050 = 50 A = N/A B= 0.1%/1,000 hours C= 0.01%/1,000 hours H 61 20 D493 Termination Finish Surge ESR C-Spec 2 61 = None 62 = 10 Cycles 25°C After Weibull 63 = 10 cycles, -55°C and 85°C After Weibull 64 = 10 cycles, -55°C and 85°C Before Weibull 10 = ESRStandard 20 = ESR-Low 30 = ESRUltra-low Designates discrete component series. D493 = T493 H = Standard Solder Coated (SnPb 5% Pb minimum) C = Hot Solder Dipped B = Gold Plated T = 100% Tin Note: These TSM Stacks are specific to T493 COTS. Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55°C to 125°C 9.4 – 2,000 μF @ 120 Hz/25°C K Tolerance (10%), M Tolerance (20%) 6 – 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2021_TSM • 6/17/2015 2 Tantalum Surface Mount Capacitors – Low ESR Tantalum Stack MnO2 (TSM) Series Qualification Test Condition Characteristics Δ C/C Endurance Thermal Shock Surge Voltage Surge Voltage Mechanical Vibration 85°C @ rated voltage, 2,000 hours 125°C @ 2/3 rated voltage, 2,000 hours KEMET specified test, mounted, -55C° to 125° C, 5 cycles 85° C, 1.15 x rated voltage 1,000 cycles 125° C, 0.77 x rated voltage 1,000 cycles MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within ±10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Δ C/C Within ±5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Δ C/C Within ±5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Δ C/C Within ±5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Δ C/C Within ±10% of initial value DF Within initial limits DCL Within initial limits © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2021_TSM • 6/17/2015 3 Tantalum Surface Mount Capacitors – Low ESR Tantalum Stack MnO2 (TSM) Series TSM2 TSP2 TSM2 TSP2 Dimensions – Millimeters (Inches) Metric will govern TSM2 2D 2X L W H W2 H2 P 6.5 ± 0.38 (.258 ± .015) 8.0 ± 0.38 (.315 ± .015) 8.0 ± 0.38 (.315 ± .015) 3.3 ± 0.2 (.130 ± .008) 4.4 ± 0.2 (.174 ± .008) 4.4 ± 0.2 (.174 ± .008) 5.3 ± 0.38 (.210 ± .015) 6.2 ± 0.38 (.245 ± .015) 8.9 ± 0.38 (.352 ± .015) 2.5 ± 0.2 (.100 ± .008) 3.0 ± 0.2 (.120 ± .008) 3.0 ± 0.2 (.120 ± .008) 4.5 ± 0.38 (.176 ± .015) 4.8 ± 0.38 (.192 ± .015) 6.9 ± 0.38 (.272 ± .015) 1.4 ± 0.38 (.055 ± .015) 1.9 ± 0.38 (.075 ± .015) 1.9 ± 0.38 (.075 ± .015) KEMET 3 Component Stack Dimensions 3D 3X TSM2 TSP2 TSM2 TSP2 TSM4 Case Code 4C P 4D 4X P TSM3 TSP3 TSM3 TSM6 TSP3 L W H W2 H2 P 6.5 ± 0.38 (.258 ± .015) 8.0 ± 0.38 (.315 ± .015) 8.0 ± 0.38 (.315 ± .015) 3.3 ± 0.2 (.130 ± .008) 4.4 ± 0.2 (.174 ± .008) 4.4 ± 0.2 (.174 ± .008) 7.8 ± 0.38 (.310 ± .015) 9.2 ± 0.38 (365 ± .015) 13.3 ± 0.38 (.525 ± .015) 2.5 ± 0.2 (.100 ± .008) 3.0 ± 0.2 (.120 ± .008) 3.0 ± 0.2 (.120 ± .008) 6.4 ± 0.38 (.252 ± .015) 7.7 ± 0.38 (.304 ± .015) 11.0 ± 0.38 (.436 ± .015) 1.4 ± 0.38 (.055 ± .015) 1.9 ± 0.38 (.075 ± .015) 1.9 ± 0.38 (.075 ± .015) SIDE VIEW ANODE (+) END VIEW L W SIDE VIEW ANODE (+) END VIEW L W W H 6.5 ± 0.38 (.258 ± .015) 8.0 ± 0.38 (.315 ± .015) 8.0 ± 0.38 (.315 ± .015) H 0.2 6.6 ± (.262 ± .008) 8.9 ± 0.2 (.350 ± .008) 8.9 ± 0.2 (.350 ± .008) 5.3 ± 0.38 (.210 W±2 .015) 6.2 ± 0.38 (245 ± .015) 8.9 ± 0.38 (.352W±2 .015) SIDE VIEW ANODE (+) END VIEW L W SIDE VIEW Case Code 6C 6X P TSM4 TSP4 TSM4 TSP4 H2 P 5.8 ± 0.2 4.6 ± 0.38 (.180 ± .015) 4.8 ± 0.38 (.192 ± .015) 6.9 ± 0.38 (.272 ± .015) 1.4 ± 0.38 (.055 ± .015) 1.9 ± 0.38 (.075 ± .015) 1.9 ± 0.38 (.075 ± .015) H2 (.230 ± .008) 7.4 ± 0.2 (.292 ± .008) 7.4 ± 0.2 (.292 ± .008) W L W H 6.5 ± 0.38 (.258 ± .015) 8.0 ± 0.38 (.315 ± .015) 8.0 ± 0.38 (.315 ± .015) 6.6 ± H 0.2 (.262 ± .008) 8.9 ± 0.2 (.350 ± .008) 8.9 ± H 0.2 (.350 ± .008) 7.8 ± 0.38 (.310 ± .015) 9.2 ± 0.38 (365 ± .015) 13.3 ± 0.38 (.525 ± .015) W2 H2 P 5.8 ± 0.2 6.6 ± 0.38 (.260 ± .015) 7.7 ± 0.38 (.304 ± .015) 11.0 ± 0.38 (.436 ± .015) 1.4 ± 0.38 (.055 ± .015) 1.9 ± 0.38 (.075 ± .015) 1.9 ± 0.38 (.075 ± .015) 7.4 ± 0.2 (.292 ± .008) 7.4 ± 0.2 H2(.292 ± .008) H W H2 H2 W2 W2 SIDE VIEW ANODE (+) END VIEW L W SIDE VIEW ANODE (+) END VIEW L W H H2 H P H2 W2 SIDE VIEW ANODE (+) END VIEW L P W2 SIDE VIEW W ANODE (+) END VIEW W H H2 H P W2 P W2 SIDE VIEW ANODE (+) END VIEW L W SIDE VIEW ANODE (+) END VIEW L W H P H2 H2 H © KEMETPElectronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com W P 2 ANODE (+) END VIEW P TSM6 TSP6 TSM6 TSP6 W2 H2(.230 ± .008) SIDE VIEW L W2 ANODE (+) END VIEW KEMET 6 Component Stack Dimensions L 6D H2 W H KEMET H4 Component Stack Dimensions L L P TSM3 TSP3 TSM3 TSP3 TSM3 Case Code 3C ANODE (+) END VIEW L KEMET 2 Component Stack Dimensions Case Code 2C SIDE VIEW H2 W2 T2021_TSM •W6/17/2015 2 4 Tantalum Surface Mount Capacitors – Low ESR Tantalum Stack MnO2 (TSM) Series Capacitance and Rated Voltage Chart Capacitance Rated Voltage µF Code 9.4 945 6V 10 V 16 V 20 V 25 V 35 V 2D 14 146 3D 19 196 4D 20 206 28 286 30 306 40 406 44 446 2C 50 V 2X 6D 2C 2C 3C 3X 4C 4X 2D 45 456 3C 60 606 4C 66 666 3C 3D 88 886 4C 4D 90 906 94 946 130 137 140 147 3C 3D 190 197 4C 4D 6C 6X 6C 2C 2D 6C, 2D 200 207 270 277 2C 280 287 300 307 3C 400 407 4C 410 417 440 447 450 457 600 607 660 667 3C, 2D 3D, 2X 880 887 4C 4D 900 907 990 997 3D 3X 1300 138 6C, 4D 6D, 4X 2000 208 6D 6X 6D 3D 4D 6C 6D 2D 6D 2C 2D 3D 6C 4D 6D © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2021_TSM • 6/17/2015 5 Tantalum Surface Mount Capacitors – Low ESR Tantalum Stack MnO2 (TSM) Series Table 1A – TSM2 Ratings & Part Number Reference Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number VDC @ 85ºC µF KEMET/EIA (See below for part options) 6.3 10 16 20 25 35 6.3 10 16 20 25 35 50 10 50 440 200 94 44 30 20 660 440 300 130 94 44 9.4 660 20 2C 2C 2C 2C 2C 2C 2D 2D 2D 2D 2D 2D 2D 2X 2X TSM2C447(1)006(2)(3)(4)(5) TSM2C207(1)010(2)(3)(4)(5) TSM2C946(1)016(2)(3)(4)(5) TSM2C446(1)020(2)(3)(4)(5) TSM2C306(1)025(2)(3)(4)(5) TSM2C206(1)035(2)(3)(4)(5) TSM2D667(1)006(2)(3)(4)(5) TSM2D447(1)010(2)(3)(4)(5) TSM2D307(1)016(2)(3)(4)(5) TSM2D137(1)020(2)(3)(4)(5) TSM2D946(1)025(2)(3)(4)(5) TSM2D446(1)035(2)(3)(4)(5) TSM2D945(1)050(2)(3)(4)(5) TSM2X667(1)010(2)(3)(4)(5) TSM2X206(1)050(2)(3)(4)(5) DC Leakage DF Standard ESR Low ESR Ultra-low ESR µA @ +20ºC Maximum/ 5 Minutes 27.8 20.0 15.0 8.8 7.6 7.0 41.6 44.0 48.0 27.2 23.6 15.4 4.8 66.0 10.0 % @ +20ºC 120 Hz Maximum 10 8 6 6 6 6 8 8 8 8 10 6 6 10 6 Ω @ 20ºC 100 kHz Maximum 0.600 0.600 0.600 0.600 0.750 1.000 0.250 0.250 0.350 0.350 0.350 0.350 0.750 0.250 0.350 Ω @ 20ºC 100 kHz Maximum 0.150 0.150 0.250 0.200 0.450 0.600 0.075 0.100 0.200 0.100 0.100 0.200 0.300 0.050 0.200 Ω @ 20ºC 100 kHz Maximum 0.120 NA 0.175 NA NA NA 0.050 0.040 0.075 0.075 0.060 0.100 0.140 0.025 NA DC Leakage DF Standard ESR Low ESR Ultra-low ESR µA @ +20ºC Maximum/ 5 Minutes 41.7 30.0 22.5 13.2 11.4 10.5 62.4 66.0 72.0 40.8 35.4 23.1 7.2 99.0 15.0 % @ +20ºC 120 Hz Maximum 10 8 6 6 6 6 8 8 8 8 10 6 6 10 6 Ω @ 20ºC 100 kHz Maximum 0.400 0.400 0.400 0.400 0.500 0.667 0.167 0.167 0.233 0.233 0.233 0.233 0.500 0.167 0.233 Ω @ 20ºC 100 kHz Maximum 0.100 0.100 0.167 0.133 0.300 0.400 0.050 0.067 0.133 0.067 0.067 0.133 0.200 0.033 0.133 Ω @ 20ºC 100 kHz Maximum 0.077 NA 0.117 NA NA NA 0.033 0.027 0.050 0.050 0.040 0.067 0.093 0.017 NA Maximum Operating Temp MSL ºC Reflow Temp ≤ 260ºC 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Operating Temp MSL ºC Reflow Temp ≤ 260ºC 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Table 1B – TSM3 Ratings & Part Number Reference Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number VDC @ 85ºC µF KEMET/EIA (See below for part options) 6.3 10 16 20 25 35 6.3 10 16 20 25 35 50 10 50 660 300 140 66 45 30 990 660 450 200 140 66 14 990 30 3C 3C 3C 3C 3C 3C 3D 3D 3D 3D 3D 3D 3D 3X 3X TSM3C667(1)006(2)(3)(4)(5) TSM3C307(1)010(2)(3)(4)(5) TSM3C147(1)016(2)(3)(4)(5) TSM3C666(1)020(2)(3)(4)(5) TSM3C456(1)025(2)(3)(4)(5) TSM3C306(1)035(2)(3)(4)(5) TSM3D997(1)006(2)(3)(4)(5) TSM3D667(1)010(2)(3)(4)(5) TSM3D457(1)016(2)(3)(4)(5) TSM3D207(1)020(2)(3)(4)(5) TSM3D147(1)025(2)(3)(4)(5) TSM3D666(1)035(2)(3)(4)(5) TSM3D146(1)050(2)(3)(4)(5) TSM3X997(1)010(2)(3)(4)(5) TSM3X306(1)050(2)(3)(4)(5) (1) To complete KEMET part number, insert M for ± 20%, K for ± 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 hours), C (0.01%/1,000 hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull or 64 = 10 cycles -55°C +85°C before Weibull. Designates Surge current option. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2021_TSM • 6/17/2015 6 Tantalum Surface Mount Capacitors – Low ESR Tantalum Stack MnO2 (TSM) Series Table 1C – TSM4 Ratings & Part Number Reference Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number VDC @ 85ºC µF KEMET/EIA (See below for part options) 6.3 10 16 20 25 35 6.3 10 16 20 25 35 50 10 50 880 400 190 88 60 40 1300 880 600 270 180 88 19 1300 40 4C 4C 4C 4C 4C 4C 4D 4D 4D 4D 4D 4D 4D 4X 4X TSM4C887(1)006(2)(3)(4)(5) TSM4C407(1)010(2)(3)(4)(5) TSM4C197(1)016(2)(3)(4)(5) TSM4C886(1)020(2)(3)(4)(5) TSM4C606(1)025(2)(3)(4)(5) TSM4C406(1)035(2)(3)(4)(5) TSM4D138(1)006(2)(3)(4)(5) TSM4D887(1)010(2)(3)(4)(5) TSM4D607(1)016(2)(3)(4)(5) TSM4D277(1)020(2)(3)(4)(5) TSM4D187(1)025(2)(3)(4)(5) TSM4D886(1)035(2)(3)(4)(5) TSM4D196(1)050(2)(3)(4)(5) TSM4X138(1)010(2)(3)(4)(5) TSM4X406(1)050(2)(3)(4)(5) DC Leakage DF Standard ESR Low ESR Ultra-low ESR µA @ +20ºC Maximum/ 5 Minutes 55.6 40.0 30.0 17.6 15.2 14.0 83.2 88.0 96.0 54.4 47.2 30.8 9.6 132.0 20.0 % @ +20ºC 120 Hz Maximum 10 8 6 6 6 6 8 8 8 8 10 6 6 10 6 Ω @ 20ºC 100 kHz Maximum 0.300 0.300 0.300 0.300 0.375 0.500 0.125 0.125 0.175 0.175 0.175 0.175 0.375 0.125 0.175 Ω @ 20ºC 100 kHz Maximum 0.075 0.075 0.125 0.100 0.225 0.300 0.038 0.050 0.100 0.050 0.050 0.100 0.150 0.025 0.100 Ω @ 20ºC 100 kHz Maximum 0.058 NA 0.088 NA NA NA 0.025 0.020 0.038 0.038 0.030 0.050 0.070 0.013 NA DC Leakage DF Standard ESR Low ESR Ultra-low ESR µA @ +20ºC Maximum/ 5 Minutes 83.4 60.0 45.0 26.4 22.8 21.0 124.8 132.0 144.0 81.6 70.8 46.2 14.4 198.0 30.0 % @ +20ºC 120 Hz Maximum 10 8 6 6 6 6 8 8 8 8 10 6 6 10 6 Ω @ 20ºC 100 kHz Maximum 0.200 0.200 0.200 0.200 0.250 0.333 0.083 0.083 0.117 0.117 0.117 0.117 0.250 0.083 0.117 Ω @ 20ºC 100 kHz Maximum 0.050 0.050 0.083 0.067 0.150 0.200 0.025 0.033 0.067 0.033 0.033 0.067 0.100 0.017 0.067 Ω @ 20ºC 100 kHz Maximum 0.038 NA 0.058 NA NA NA 0.017 0.013 0.025 0.025 0.020 0.033 0.047 0.008 NA Maximum Operating Temp MSL ºC Reflow Temp ≤ 260ºC 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Operating Temp MSL ºC Reflow Temp ≤ 260ºC 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Table 1D – TSM6 Ratings & Part Number Reference Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number VDC @ 85ºC µF KEMET/EIA (See below for part options) 6.3 10 16 20 25 35 6.3 10 16 20 25 35 50 10 50 1300 600 280 130 90 60 2000 1300 900 410 280 130 28 2000 60 6C 6C 6C 6C 6C 6C 6D 6D 6D 6D 6D 6D 6D 6X 6X TSM6C138(1)006(2)(3)(4)(5) TSM6C607(1)010(2)(3)(4)(5) TSM6C287(1)016(2)(3)(4)(5) TSM6C137(1)020(2)(3)(4)(5) TSM6C906(1)025(2)(3)(4)(5) TSM6C606(1)035(2)(3)(4)(5) TSM6D208(1)006(2)(3)(4)(5) TSM6D138(1)010(2)(3)(4)(5) TSM6D907(1)016(2)(3)(4)(5) TSM6D417(1)020(2)(3)(4)(5) TSM6D287(1)025(2)(3)(4)(5) TSM6D137(1)035(2)(3)(4)(5) TSM6D286(1)050(2)(3)(4)(5) TSM6X208(1)010(2)(3)(4)(5) TSM6X606(1)050(2)(3)(4)(5) 1) To complete KEMET part number, insert M for ± 20%, K for ± 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 hours), C (0.01%/1,000 hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull or 64 = 10 cycles -55°C +85°C before Weibull. Designates Surge current option. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2021_TSM • 6/17/2015 7 Tantalum Surface Mount Capacitors – Low ESR Tantalum Stack MnO2 (TSM) Series Recommended Voltage Derating Guidelines 120% % Working Voltage 100% 80% 60% 40% 20% 0% % Change in Working DC Voltage with Temperature 67% Recommended Maximum Application Voltage (As % of Rated Voltage) -55 25 33% 85 Temperature (ºC) 125 Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 85°C 125°C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2021_TSM • 6/17/2015 8 Tantalum Surface Mount Capacitors – Low ESR Tantalum Stack MnO2 (TSM) Series Table 2 – Land Dimensions/Courtyard KEMET Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case L W S V1 V2 L W S V1 V2 L W S V1 V2 TSM2C 2.98 2.74 2.53 9.50 4.50 2.58 2.62 2.73 8.40 4.00 2.20 2.52 2.89 7.54 3.74 TSM2D 3.48 3.24 3.03 11.00 5.60 3.08 3.12 3.23 9.90 5.10 2.70 3.02 3.39 9.04 4.84 TSM2X 3.48 3.24 3.03 11.00 5.60 3.08 3.12 3.23 9.90 5.10 2.70 3.02 3.39 9.04 4.84 TSM3C 2.98 2.74 2.53 9.50 4.50 2.58 2.62 2.73 8.40 4.00 2.20 2.52 2.89 7.54 3.74 TSM3D 3.48 3.24 3.03 11.00 5.60 3.08 3.12 3.23 9.90 5.10 2.70 3.02 3.39 9.04 4.84 TSM3X 3.48 3.24 3.03 11.00 5.60 3.08 3.12 3.23 9.90 5.10 2.70 3.02 3.39 9.04 4.84 TSM4C 2.98 6.04 2.53 9.50 7.80 2.58 5.92 2.73 8.40 7.30 2.20 5.82 2.89 7.54 7.04 TSM4D 3.48 7.64 3.03 11.00 10.10 3.08 7.52 3.23 9.90 9.60 2.70 7.42 3.39 9.04 9.34 TSM4X 3.48 7.64 3.03 11.00 10.10 3.08 7.52 3.23 9.90 9.60 2.70 7.42 3.39 9.04 9.34 TSM6C 2.98 6.04 2.53 9.50 7.80 2.58 5.92 2.73 8.40 7.30 2.20 5.82 2.89 7.54 7.04 TSM6D 3.48 7.64 3.03 11.00 10.10 3.08 7.52 3.23 9.90 9.60 2.70 7.42 3.39 9.04 9.34 TSM6X 3.48 7.64 3.03 11.00 10.10 3.08 7.52 3.23 9.90 9.60 2.70 7.42 3.39 9.04 9.34 Density Level A: For low-density Product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). ¹ Height of these chips may create problems in wave soldering. V1 L L W W V2 S Grid Placement Courtyard © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2021_TSM • 6/17/2015 9 Tantalum Surface Mount Capacitors – Low ESR Tantalum Stack MnO2 (TSM) Series Soldering Process Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. “Wiping” the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100°C 150°C Temperature Maximum (TSmax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds 3°C/seconds maximum Ramp-up Rate (TL to TP) 3°C/seconds maximum Liquidous Temperature (TL) 183°C 217°C Time Above Liquidous (tL) 60 – 150 seconds 220°C* 235°C** 60 – 150 seconds 250°C* 260°C** Peak Temperature (TP) Time within 5°C of Maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) 20 seconds maximum 30 seconds maximum 6°C/seconds maximum 6°C/seconds maximum Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z TP TL Temperature KEMET’s families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp Up Rate = 3ºC/seconds Maximum Ramp Down Rate = 6ºC/seconds tL Tsmax Tsmin 25 tS 25ºC to Peak Time Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years of receipt. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2021_TSM • 6/17/2015 10 Tantalum Surface Mount Capacitors – Low ESR Tantalum Stack MnO2 (TSM) Series Construction Detailed Cross Section Silver Paint (Fourth Layer) Tantalum Wire Polarity Stripe (+) Molded Epoxy Case Leadframe (- Cathode) BeCu Alloy 190 Polarity Bevel (+) Lead Termination (- Cathode) Washer Weld (to attach wire) High Temperature Solder MnO2 Carbon (Third Layer) (Second Layer) Tantalum Wire Ta2O5 Dielectric (First Layer) High Temperature Solder Silver Adhesive Molded Epoxy Case Washer Tantalum Leadframe (+ Anode) BeCu Alloy 190 Lead Termination (+ Anode) Solder Coated Alloy 752 Capacitor Marking Date Code * KEMET Military COTS Polarity Indicator (+) 1st digit = Last number of Year 9 = 2009 0 = 2010 1 = 2011 2 = 2012 3 = 2013 4 = 2014 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year Picofarad Code KEMET ID Rated Voltage Date Code* * 230 = 30th week of 2012 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2021_TSM • 6/17/2015 11 Tantalum Surface Mount Capacitors – Low ESR Tantalum Stack MnO2 (TSM) Series KEMET Corporation World Headquarters Europe Asia Southern Europe SassoMarconi,Italy Tel:39-051-939111 Northeast Asia Hong Kong Tel:852-2305-1168 MailingAddress: P.O. Box 5928 Greenville, SC 29606 Skopje,Macedonia Tel:389-2-55-14-623 Shenzhen,China Tel:86-755-2518-1306 www.kemet.com Tel:864-963-6300 Fax:864-963-6521 Central Europe Landsberg,Germany Tel:49-8191-3350800 Corporate Offices FortLauderdale,FL Tel:954-766-2800 Kamen,Germany Tel:49-2307-438110 North America Northern Europe Wyboston,UnitedKingdom Tel:44-1480-273082 Taipei, Taiwan Tel:886-2-27528585 Espoo,Finland Tel:358-9-5406-5000 Southeast Asia Singapore Tel:65-6701-8033 2835KEMETWay Simpsonville, SC 29681 Southeast LakeMary,FL Tel:407-855-8886 Northeast Wilmington, MA Tel:978-658-1663 Central Novi, MI Tel:248-994-1030 Beijing,China Tel:86-10-5877-1075 Shanghai, China Tel:86-21-6447-0707 Seoul, South Korea Tel:82-2-6294-0550 Penang,Malaysia Tel:60-4-6430200 Bangalore,India Tel:91-806-53-76817 West Milpitas, CA Tel:408-433-9950 Mexico Guadalajara,Jalisco Tel:52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2021_TSM • 6/17/2015 12 Tantalum Surface Mount Capacitors – Low ESR Tantalum Stack MnO2 (TSM) Series Disclaimer Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand verifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced. AllInformationgivenhereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied. StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly bycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.AnytechnicaladviceinferredfromthisInformationorotherwise providedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesnoobligationorliabilityfortheadvicegivenorresultsobtained. AlthoughKEMETdesignsandmanufacturesitsproductstothemoststringentqualityandsafetystandards,giventhecurrentstateoftheart,isolatedcomponentfailuresmaystill occur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards(suchasinstallationofprotective circuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjuryorpropertydamage. Althoughallproduct–relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatothermeasuresmaynot berequired. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2021_TSM • 6/17/2015 13