DUAL-IN-LINE HEADERS SERIES 162, 862 • SHRINK DIP HEADER AND STRIPS, SOLDER TAIL • High density DIP headers & strips for adapters 862...180 B .104 .019 DIA. • Series 162 DIP headers and Series 862 strip .142 .057 DIA. .110 .046 DIA. .020 DIA. and board stacking applications with .070” lead spacing .110 .399 .140 headers use MM #6218 pins. See page 208 for details • Insulators are high temperature thermoplastic, .117 suitable for all soldering operations 162...180 • For Electrical, Mechanical and Environmental Data, see page 264 for details ORDERING INFORMATION A B C 16 0.572 0.3 0.39 35 162-XX-316-00-180000 28 30 48 0.992 1.062 1.692 0.4 0.4 0.4 0.49 0.49 0.49 20 18 12 162-XX-428-00-180000 162-XX-430-00-180000 162-XX-448-00-180000 20 28 40 42 48 52 56 64 68 0.712 0.992 1.412 1.482 1.692 1.832 1.972 2.252 2.392 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 28 20 14 13 12 11 10 9 8 162-XX-620-00-180000 162-XX-628-00-180000 162-XX-640-00-180000 162-XX-642-00-180000 162-XX-648-00-180000 162-XX-652-00-180000 162-XX-656-00-180000 162-XX-664-00-180000 162-XX-668-00-180000 64 2.252 0.75 0.84 8 162-XX-764-00-180000 B C .070 RoHS - 2 XX=Plating Code See Below 2011/65/EU A = 1.482 FOR 21 POS. SINGLE ROW STRIP HEADER .104 If desired, we will supply any length up to 21 pins. .070 21 1.482 --- .104 --- 862-XX-121-00-180000 SPECIFY PLATING CODE XX = Pin Plating 10 10 ” Au 90 200 ” Sn/Pb 40 200 ” Sn Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: 516-922-9253 • www.mill-max.com PAGE 127 | IC SOCKETS / TO SOCKETS A Quantity per tube Total number of pins See page 132 for Insulator Details