DUAL-IN-LINE SOCKETS SERIES 110 • SELECTIVELY LOADED RELAY DIP SOCKET, SOLDER TAIL • Relay sockets accept devices with I/O pins on 0,38-0,64 0,25 * 0,46 2,54 grid 1,78 DIA. 1,52 DIA. 2,41 2,79 1,35 DIA. 3,71 4,19 • Additional Relay DIP socket patterns are available on Page 134 • Series 110 use MM #1001 receptacles. See 0,51 DIA. 3,18 page 165 for details • Hi-Rel, 4-finger BeCu #30 contact is rated at 3 amps. See page 253 for details 2,39 7,79 12,65 • Insulators are high temperature thermoplastic, suitable for all soldering operations 2,59 7,59 MM 5,08 • For Electrical, Mechanical and Environmental 4 x 2,54 Data, see page 264 for details Fig. 1 2,39 17,70 ORDERING INFORMATION 12,90 Series 110...002 4,39 10,11 MM 7,62 FIG. 1 6 x 2,54 8 Position Relay Socket 110-XX-210-10-002000 Fig. 2 Series 110...002 15,49 FIG. 2 110-XX-314-10-002000 4,39 10,11 MM 7,62 Series 110...003 7 x 2,54 FIG. 3 Fig. 3 2,39 8 Position Relay Socket 110-XX-316-10-003000 20,29 15,49 Series 110...004 4,39 10,11 MM 7,62 FIG. 4 Fig. 4 Series 110...005 20,29 FIG. 5 15,49 4,39 10,11 MM 7,62 4 Position Relay Socket 110-XX-316-10-004000 7 x 2,54 2,39 8 Position Relay Socket 110-XX-316-10-005000 Series 110...002 FIG. 6 7 x 2,54 Fig. 5 8 Position Relay Socket 14 Position Relay Socket 110-XX-328-10-002000 2,39 35,51 14,15 14,15 MM 7,62 13 x 2,54 SPECIFY PLATING CODE XX= Fig. 6 = Loaded Position XX=Plating Code See Below 4,39 10,11 = Empty Position 13 93 RoHS - 2 2011/65/EU 43 Sleeve (Pin) 0,25μm Au 5,08μm Sn/Pb 5,08μm Sn Contact (Clip) 0,76μm Au 0,76μm Au 0,76μm Au Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: 516-922-9253 • www.mill-max.com PAGE 135 | IC SOCKETS / TO SOCKETS 2,39 20,29