AC Fan - 115V, 230V, Dual Voltage 120x38mm (4.7”x 1.5”) OA109 Series 119.50.5 (4.70") (4.13") M4x0.7 THREADED GROUND HOLE Frame Diecast Aluminum Impeller PBT, UL94V-O plastic Connection 2x 300mm Lead wires (22AWG) or terminals Motor AC shaded pole, impedance and thermally protected Bearing System Dual ball or Sleeve Insulation Resistance 10M ohm between leadwire and frame (500VDC) Dielectric Strength 1 min at 1500 VAC, 50/60Hz Model Number Speed (RPM) Airflow (CFM) 104.80.3 (4.13") N TIO 119.50.5 (1.52") 4.2.2 (.166") DIA. HOLE THRU TYP. 8 PLACES (4.70") 104.80.3 ROTA 38.50.5 #8-32 THREADED GROUND HOLE Operating Temperature Ball Bearing -20C ~ +80C Sleeve Bearing -10C ~ +50C Life Expectancy Ball Bearing 60,000 hours (L10 at 40C) Sleeve Bearing 30,000 hours (L10 at 40C) Dual Voltage Fans can be configured to run on 115V or 230V. Connection via 4x leads m0 Noise (dB) Volts AC Voltage Range Watts Max. Static Pressure (“H2O) OA109AP-11-1* 3000 110 42 115 80~130 15 .28 OA109AP-11-2* 2300 71 35 115 80~130 11 .24 OA109AP-11-3* 1600 51 25 115 80~130 8 .15 OA109AP-22-1* 3000 110 42 230 160~260 15 .28 OA109AP-22-2* 2300 71 35 230 160~260 11 .24 OA109AP-22-3* 1600 51 25 230 160~260 8 .15 OA109AP-11/22-1W** 3000 110 42 115/230 80~260 15 .28 OA109AP-11/22-2W** 2300 71 35 115/230 80~260 11 .24 OA109AP-11/22-3W** 1600 51 25 115/230 80~260 8 .15 * Indicate “TB” (Terminal Ball Bearing), “WB” (12” Wire Leads, Ball Bearing), “TS” (Terminal, Sleeve Bearing), “WS” (12” Wire Leads, Sleeve Bearing) ** Indicate “B” (Ball Bearing) or “S” (Sleeve Bearing) Knight Electronics, Inc. 10557 Metric Drive Dallas, Texas 75243 214-340-0265 Orion Fans RoHS Compliant 10 Information and data is subject to change without prior notification.