User’s Guide NHD-TS-12864CRNA# TOUCH PANEL Tel: (847) 844-8795 Fax: (847) 844-8796 Newhaven Display International 2511 Technology Drive, #101 Elgin, IL 60124 May 28, 2009 Newhaven Display International RECORDS OF REVISION VERSION DATE 0 2007/8/9 REVISED PAGE NO. DOC. FIRST ISSUE SUMMARY First issue 1.General Specification ITEM STANDARD VALUE UNIT Outline dimension 71.35±0.3(L) x55.00±0.3(W) x1.1±0.1(T) mm View area 61.60 (L) x47.20 (W) mm Active area 59.00 (L) x 44.20(W) mm 2.Absolute Maximum Ratings Operating ITEM SYMBOL MIN. TYP. MAX. UNIT Temperature TOP 0 - +50 ℃ TST -20 - +70 ℃ Storage Temperature Operating temperature 20 85 %RH Storage temperature 10 90 %RH Light transmission 80 % 3.Reliability ■Content of Reliability Test Environmental Test Applicable Test Item Content of Test Test Condition Standard High Temperature Endurance test applying the high storage temperature 70℃ storage and operating test . 120hrs Low Temperature Endurance test applying the high storage temperature -20℃ storage for a long time. 120hrs —— —— ***The test of above being finished, touch screen must satisfy the specification as below: Resistance between leads : (1) Film : 570~920 Ohm , Glass: 220 ~ 330 Ohm (2) Linearity : Less than 1.5% (3) Insulation resistance: 10M Ohm or more. 第 3 頁,共 5 頁 1/1 1 2 3 4 Right Bottom Left Top TOUCH PANEL PIN ASSIGENMENT 0.3mm. Newhaven Display NHD-TS-12864CRNA# T.P DRAWING 第 4 頁,共 5 頁 71.35±0.3 LEFT 0 55.0±0.3 61.6(V.A) ") 3.0 62.6(Adhesive) .9 (2 .72 TOP 47.2(V.A) 48.2(Adhesive) 5.75 6.35 73 RIGHT 1.1±0.1 The non-specified tolerance of dimension is mm 3/2 3.5 7.05 "B" BOTTOM 2 DETAIL B SCALE 2/1 45.6(isoation Area) 4.3 44.2(A.A) 5.0 60.4(isoation Area) 5.25 50.0±1.0 4.0 0.65 59.0(A.A) 2.8 10.0 "A" 1.0 5.0±0.15 3.0 19.5 16.0 DETAIL A SCALE 2/1 1.8 27.5 LCD Panel Estimate Feedback Sheet Panel Item Number: 1、Panel Specification: 1. Panel Type: □ Pass □ NG , 2. View Direction: □ Pass □ NG , 3. Numbers of Dots(Icon): □ Pass □ NG , 4. Operating Temperature: □ Pass □ NG , 5 Storage Temperature: □ Pass □ NG , 6. Others: 2、Mechanical Specification: 1. Dots(Icon) Size: □ Pass □ NG , 2. VA Size: □ Pass □ NG , 3. AA Size: □ Pass □ NG , 4. Outline Dimension: □ Pass □ NG , 5. Others: □ Pass □ NG , 3、Summary: Sales signature: Customer Signature: Date: 第 5 頁,共 5 頁 / /