NHD-TS-240128BRNA#

User’s Guide
NHD-TS-240128BRNA#
TOUCH PANEL
Tel: (847) 844-8795
Fax: (847) 844-8796
Newhaven Display International
2511 Technology Drive, #101
Elgin, IL 60124
May 28, 2009
Newhaven Display International
RECORDS OF REVISION
VERSION
DATE
0
A
2006-9-7
2006.09.15
REVISED
PAGE NO.
DOC. FIRST ISSUE
SUMMARY
First issue
5
Modify the contour drawing
1.General Specification
ITEM
STANDARD VALUE
UNIT
Outline dimension
128.0±0.3(L) x74.0±0.3(W) x 1.5±0.15(T)
mm
View area
114.0(L) x64.0(W)
mm
Active area
108.0(L) x 57.6(W)
mm
2.Absolute Maximum Ratings
Operating
ITEM
SYMBOL
MIN.
TYP.
MAX.
UNIT
Temperature
TOP
-10
－
+50
℃
TST
-20
－
+70
℃
Storage Temperature
Operation Humidity Range
20
90
%RH
Storage Humidity Range
20
90
%RH
Light transmission
80
%
3.Reliability
■Content of Reliability Test
Environmental Test
Applicable
Test Item
Content of Test
Test Condition
Standard
High Temperature
Endurance test applying the high storage temperature
70℃
storage
and operating test .
120hrs
Low Temperature
Endurance test applying the high storage temperature
-20℃
storage
for a long time.
120hrs
——
——
***The test of above being finished, touch screen must satisfy the specification as below:
Resistance between leads :
(1) Film : 570~920 Ohm , Glass: 220 ~ 330 Ohm
(2) Linearity : Less than 1.5%
(3) Insulation resistance: 10M Ohm or more.
第 3 頁，共 7 頁
4.Quality Standard
(1)Hair Flaws :
W ≦ 0.05mm , L ≦ 12 mm ok
0.05mm <
W≦ 0.10mm , L ≦ 5 mm 3 or less for OK
W≦ 0.10mm , L ≦ 2mm NO good
(W: Width OF flaws, L: length of laws)
(2)Dot – shaped Impurities :
D≦ 0.10mm OK
0.1mm <
D≦ 0.3mm 5 or less for OK
D > 0.3mm No good
(D : average of diameter)
(3)Scratch:
W ≦ 0.05mm , L ≦ 12 mm ok
0.05mm <
W≦ 0.10mm , L ≦ 12 mm 5 or less for OK
W≦ 0.10mm , L > 2mm NO good
(W: Width of Scratch, L: length of scratch)
第 4 頁，共 7 頁
第 5 頁，共 7 頁
5. Material List of Components for RoHs
1. Newhaven Display hereby declares that all of or part of products (with the mark
“#”in code), including, but not limited to, the LCM, accessories or packages, manufactured
and/or delivered to your company (including your subsidiaries and affiliated company)
directly or indirectly by our company (including our subsidiaries or affiliated companies) do
not intentionally contain any of the substances listed in all applicable EU directives and
regulations, including the following substances.
Exhibit A：The Harmful Material List
.
Material
(Cd)
(Pb)
(Hg)
(Cr6+)
PBBs
PBDEs
Limited
100
1000
1000
1000
1000
1000
Value
ppm
ppm
ppm
ppm
ppm
ppm
Above limited value is set up according to RoHS.
2.Process for RoHS requirement：
(1) Use the Sn/Ag/Cu soldering surface；the surface of Pb-free solder is rougher than we used before.
(2) Heat-resistance temp.：
Reflow：250℃,30 seconds Max.；
Connector soldering wave or hand soldering：320℃, 10 seconds max.
(3) Temp. curve of reflow, max. Temp.：235±5℃；
Recommended customer’s soldering temp. of connector：280℃, 3 seconds.
第 6 頁，共 7 頁
LCD Panel Estimate Feedback Sheet
Panel Item Number：
1、Panel Specification：
1. Panel Type：
□ Pass
□ NG ,
2. View Direction：
□ Pass
□ NG ,
3. Numbers of Dots(Icon)：□ Pass
□ NG ,
4. Operating Temperature： □ Pass
□ NG ,
□ Pass
□ NG ,
5. Storage Temperature：
6. Others：
2、Mechanical Specification：
1. Dots(Icon) Size：
□ Pass
□ NG ,
2. VA Size：
□ Pass
□ NG ,
3. AA Size：
□ Pass
□ NG ,
4. Outline Dimension：□ Pass
□ NG ,
□ Pass
□ NG ,
5. Others：
3、Summary：
Sales signature：
Customer Signature：
Date：
第 7 頁，共 7 頁
/
/