N NHD‐‐1.8‐‐128160EEF‐C CTXI##‐T TFTT (Thin‐‐Film Trransisto or) Liquid Crysttal Disp play Mo odule NHD‐‐ 1.8‐ 1281 160‐ EF‐ C‐ T‐ X‐ I‐ #‐ T‐ Newhaven Display 1.8” Diagonal 12 28 x 160 Pixels (Portrait M Mode) Model M Built‐in Contro oller White LED bac W cklight TFT 6:00 Optimal V View, Wide Te emperature RoHS Compliant 4‐‐wire Resistivve Touch Pane el Newh haven Disp play Intern national, In nc. 2511 Techno ology Drive, SSuite 101 Elggin IL, 60124 Ph: 8 847‐844‐8795 5 Fax: 8847‐844‐87966 www.new whavendisplayy.com h@newhaven ndisplay.com [email protected] om nhtech Document Revision History Revision 0 Date 9/11/2013 Description Initial Release Functions and Features 128 x 160 pixels (portrait mode) LED backlight 2.8V power supply 8‐bit Parallel interface Built‐in ILI9163C controller 4‐wire Resistive touch panel [2] Changed by AK L A I Mechanical Drawing XR YD C 7.29±0.2 5.59±0.2 0.86±0.3 D 24 A 18.4±0.1 21.8±0.2 31.69±0.2 O C 1 (1.5) 24 2- 5 1. D.S.T(t=0.05mm) 0 2 25 .1 R0 A2 A1K2 K1 Viewing after bending , shipment with unfold 4±0.15 B C YD XR D 0.6 . 25 (8.15) (4.86) tape 1 25±0.15 P=0.8 W=0.5 D.S.T T=0.10MM A 1.3 1 component area 2±0.3 20±0.3 2.5±0.3 4.2±0.5 17.63±0.3 YU XL YD XR K1 K2 A1 A2 1.5±0.3 F N tape D.S.T(t=0.05mm) D.S.T T=0.10MM Date GND IOVDD VDD /CS /RST D/C /WR /RD DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 LED-A LED-K1 LED-K2 GND YU XL Newhaven Display NHD-1.8-128160EF-CTXI#-T WW YY E D I Back 128(RGB)X160 DOTS Front 37.04/TP(V,A) 36.04/TP(A,A) A.A 35.04 BL 46.75±0.2 46.35±0.2/TP B XL (5) Newhaven Display NHD-1.8-128160EF-CTXI#-T WW YY Tear tape (16.5) YU 6 Description T N 3.45±0.2 Except the double side tape (8.4) 4.1±0.15 A.A 28.03 5 Rev 0.8 (2.27) (2.77) (3.27) A 0.2±0.2 (2.33) (2.83) (3.34) 4 YU XL YD XR BL 34.7±0.2 34.3±0.2/TP 30.03/TP(V,A) 29.03TP/(A,A) 3 24 2 1 1 Date 09/11/13 DETAIL: A 5/1 3 Unit Gen. Tolerance ±0.3mm 4 mm 5 Model: NHD-1.8-128160EF-CTXI#-T 6 The drawing contained herein is the exclusive property of Newhaven Display International, Inc. and shall not be copied, reproduced, and/or disclosed in any format without permission. [3] Pin Descripttion and W Wiring Diiagram Pin N No. Symbol 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 GND D IOVDD D VDD /CS /RSTT D/C /WR R /RD DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 LED‐A A LED‐K K1 LED‐K K2 GND D YU XL YD XR External Connection Pow wer Supply Pow wer Supply Pow wer Supply MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU Pow wer Supply Pow wer Supply Pow wer Supply Pow wer Supply Touch h Controller Touch h Controller Touch h Controller Touch h Controller Function Desccription Ground Supply Voltage for Logic (2.88V) – Can be tied to VDD Power Supply for LCD (2.8V)) Active LOW Ch hip Select sign al Active LOW Re eset signal Data / Commaand selection: ‘1’ = Data ; ‘0’ = Command Active LOW W Write signal Active LOW Re ead signal 8‐bit bi‐directional data bus Backlight Anode Backlight Cath hode Backlight Cath hode Ground Touch Panel U Up Touch Panel LLeft Touch Panel D Down Touch Panel R Right LCD cconnector: Hot‐bar solderr directly to PC CB [4] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage for Logic Supply Voltage for LCD Supply Current “H” Level input “L” Level input “H” Level output “L” Level output Backlight Supply Voltage Backlight Supply Current Symbol Top Tst IOVDD VDD IDD Vih Vil Voh Vol Vled Iled Condition Absolute Max Absolute Max Symbol Cr Lv Tr+Tf Condition Min. ‐20 ‐30 1.65 2.5 ‐ 0.7*IOVDD GND 0.8*IOVDD GND Typ. ‐ ‐ 2.8 2.8 3 ‐ ‐ ‐ ‐ 3.0 ‐ 3.2 30 Vled=3.2V Max. +70 +80 3.3 3.3 ‐ IOVDD 0.3*IOVDD IOVDD 0.2*IOVDD 3.4 40 Unit °C °C V V mA V V V V V mA Optical Characteristics Item Viewing Angle – Top Viewing Angle – Bottom Viewing Angle – Left Viewing Angle – Right Contrast Ratio Luminance Response Time (rise + fall) Min. ‐ ‐ ‐ ‐ 400 220 ‐ Cr 10 Iled=30mA Typ. 50 20 45 45 500 280 20 Max. ‐ ‐ ‐ ‐ ‐ ‐ 30 Viewing angles based on 12:00 gray scale inversion Touch Panel Characteristics Item Linearity Circuit Resistance – X‐Axis Circuit Resistance – Y‐Axis Insulation Resistance Operating Voltage Chattering Activation Force Pen Writing Durability Pitting Durability Surface Hardness Min. ‐1.5 150 250 20 ‐ ‐ 20 100,000 1,000,000 3 Typ. ‐ ‐ ‐ ‐ 5 ‐ ‐ ‐ ‐ ‐ Max. 1.5 550 800 ‐ 10 10 80 ‐ ‐ ‐ Unit % Ω Ω MΩ V ms g Characters Touches H Controller Information Built‐in ILI9163C controller. Please download specification at http://www.newhavendisplay.com/app_notes/ILI9163.pdf [5] Unit ⁰ ⁰ ⁰ ⁰ ‐ cd/m2 ms Tab ble of Com mmands [6] For C Command Descriptions, ple ease see: http p://www.new whavendisplay.com/app_n notes/ILI9163 3.pdf [7] Tim ming Charracteristiccs Paraallel 8‐bit B Bus [8] Reseet Timing [9] Example Program Code void TFT_18E_Init(void) { GPIO_ResetBits(GPIOC, CS1); GPIO_SetBits(GPIOC, nRD); GPIO_ResetBits(GPIOC, nWR); GPIO_WriteBit(GPIOC, RES, Bit_RESET); delay(5); TFT_delay(10); GPIO_WriteBit(GPIOC, RES, Bit_SET); delay(100); TFT_delay(10); TFT_18E_Write_Command(0x11); TFT_delay(100); TFT_18E_Write_Command(0x26);TFT_18E_Write_Data(0x04); TFT_18E_Write_Command(0xF2);TFT_18E_Write_Data(0x00); TFT_18E_Write_Command(0xB1);TFT_18E_Write_Data(0x0A);TFT_18E_Write_Data(0x14); TFT_18E_Write_Command(0xC0);TFT_18E_Write_Data(0x0A);TFT_18E_Write_Data(0x00); TFT_18E_Write_Command(0xC1);TFT_18E_Write_Data(0x02); TFT_18E_Write_Command(0xC5);TFT_18E_Write_Data(0x2F);TFT_18E_Write_Data(0x3E); TFT_18E_Write_Command(0xC7);TFT_18E_Write_Data(0x40); TFT_18E_Write_Command(0x2A); TFT_18E_Write_Data(0x00); TFT_18E_Write_Data(0x00); TFT_18E_Write_Data(0x00); TFT_18E_Write_Data(0x7F); TFT_18E_Write_Command(0x2B); TFT_18E_Write_Data(0x00); TFT_18E_Write_Data(0x00); TFT_18E_Write_Data(0x00); TFT_18E_Write_Data(0x9F); TFT_18E_Write_Command(0x36);TFT_18E_Write_Data(0x48); TFT_18E_Write_Command(0x3A);TFT_18E_Write_Data(0xC5); TFT_18E_Write_Command(0x29); TFT_18E_Write_Command(0x2C); } /***************************************************************************************/ void TFT_18E_Write_Command(unsigned char command) { GPIO_ResetBits(GPIOC, RS); GPIO_Write(GPIOB, command); GPIO_ResetBits(GPIOC, nWR); GPIO_SetBits(GPIOC, nWR); } /***************************************************************************************/ void TFT_18E_Write_Data(unsigned char data1) { GPIO_SetBits(GPIOC, RS); GPIO_Write(GPIOB, data1); GPIO_ResetBits(GPIOC, nWR); GPIO_SetBits(GPIOC, nWR); } /***************************************************************************************/ [10] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition Endurance test applying electric static discharge. 2 ‐30⁰C , 48hrs 1,2 +70⁰C , 48hrs 2 ‐20⁰C , 48hrs 1,2 +50⁰C , 90% RH , 48hrs 1,2 ‐20Ԩ 30 min ~ +70Ԩ 30 min, 10 cycles 10‐55Hz , 1.5mm amplitude. 2 hours in each of 3 directions X,Y,Z. For 6 hours total VS=4KV, RS=330Ω, CS=150pF Five times 3 Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information See Terms & Conditions at http://www.newhavendisplay.com/index.php?main_page=terms [11] Note +80⁰C , 48hrs